Nalaganje plošče SIRIO - nalagalnik

SIRIO

Stanje: rabljeno, Leto izdelave: 2005, Overview These eight isobaric pressure tanks (each with a capacity of 50,000 liters), manufactured by Sirio Aliberti in 2005, originate from the wine industry and were previously used for sparkling wine production. With an operating pressure of up to 6 bar and full insulation, the tanks are well suited for the fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with a food-grade epoxy internal coating, combined with polyurethane insulation, and an external cladding made of stainless steel sheet. This design represents a traditional and cost-effective alternative to stainless steel tanks, which became industry standard in later years. Thanks to their large volume and isobaric suitability, these tanks are particularly suitable for high-throughput production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required depending on operational conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of manufacture: 2005 Quantity: 8 units Type: Isobaric pressure vessel Application: Fermentation, maturation, and storage of carbonated beverages Capacity: 50,000 liters per tank Material: - Bottom: Carbon steel - Internal coating: Food-grade epoxy resin - Insulation: Polyurethane Fsdpfx Aoy Hkkajhmjph - External cladding: Stainless steel sheet Operating pressure: 6 bar Dimensions (per tank): - Internal diameter: approx. 3,200 mm - External diameter: approx. 3,450 mm - Cylinder height: approx. 5,250 mm - Foot height: approx. 1,200 mm - Total height: approx. 7,800 mm

Leto izdelave: 2016, stanje: rabljeno, MEP rezalni in upogibni stroj, SYNTAX 28 Enojna palica: Ø10 - Ø28 mm (#3 - #8) Dvojne palice: do Ø20 mm (#6) • Detektor prisotnosti palice • Večnamenski podajalni sistem: čeljust in podajalni valji • Dvojne škarje • Upogibni zatiči v skladu z mednarodnimi standardi Opomba: Ta video je promocijska predstavitev proizvajalca za model SYNTAX 28. Ne prikazuje specifične linije, ki je trenutno naprodaj. Enojna palica: ∅10 - ∅28 mm (#3 - #8) Dvojne palice: do ∅20 mm (#6) Fpedpfxoxl Avvj Ahmeh

Stanje: zelo dobro (rabljeno), O04024) AUTOMATIC PANEL STORAGE SYSTEM for BOARDS – SIRIO Total required floor space (with panel saw): approx. 10,000 mm x 47,000 mm Movable upper bridge (on X-axis) with mobile carriage (on Y-axis) and relative vacuum suction unit (moving on Z-axis) Max. speed of movable upper bridge (X-axis): approx. 150 m/min Carriage speed (Y-axis): approx. 150 m/min Vacuum suction unit movement speed (Z-axis): approx. 60 m/min Vacuum suction assembly, rotatable by 90° Automatic management system (via scanner) for the cut panel (which remains in stock) O04025) PANEL SAW with Rear Lift Table, Model FH6 430 Control: MCS Evolution. Software: SIEMENS WinAC RTX Fpedpfxjwrz Dbo Ahmjh No. 1 Rear Pusher Program Pusher Split - DUPLUS2. No. 12 Clamping Grippers Max. Cutting Width (mm): 4,300. Useful Stroke of the Pusher (mm): 4,300. Max. Saw Blade Projection (mm): 135 Scoring Saw (max. saw diameter): 200 mm Main Saw (max. saw diameter / power): 460 mm / 21 kW Adjustable Feed Speed of Saw Carriage (m/min): 1 - 150 No. 4 Front Air Cushion Tables Total Connected Load (kW): approx. 33

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE Fsdekt Uuaepfx Ahmsph M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Fpedpfxsdfgg Io Ahmoh D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0008671 - Dimenzije 6500x1100x250 - Valji L=600 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljivost strojev: AVTOMATIZACIJA NALAGANJA IN RAZLAGANJA HOMAG - BIESSE - SCM - IMA - Če vas zanima, nudimo storitev pregleda, kontaktirajte nas. Fjdpfx Ahjv Hglzjmsph

Stanje: zelo dobro (rabljeno), CNC INFOTEC machining center Model: 2515 5 axes Year of manufacture: 2018 Working area dimensions (X-Y axis): X 2100 mm, Y 3100 mm Z-axis travel: 1250 mm Fpsdpfxjun Rqgj Ahmsh Machine traverse speed X, Y, Z: X: 80 m/min, Y: 80 m/min, Z: 12 m/min Vacuum table BECKER pump HITECO spindle with HSK 63F tool holder interface

Leto izdelave: 2025, stanje: novo, Avtomatski podajalnik palet je hrbtenica vaših avtomatizacijskih procesov. Napolnjen je lahko z do 10 euro paletami (1200x800 ali 1200x1200), kar odpravlja potrebo po ročnem pripravljanju posameznih palet, prihranek časa in zmanjšanje fizične obremenitve zaposlenih. Namesto tega enota palete izdaja s pritiskom na gumb ali s prednastavljenim algoritmom na motoriziran valjčni transporter, ki jih transportira za nadaljnjo obdelavo. Model PD-10 se lahko uporablja v povezavi z različnimi rešitvami za paletizacijo. Sprejme do 10 euro palet Polni se z viličarjem Zmanjšuje fizično obremenitev Povečuje učinkovitost Fodshbg Uxjpfx Ahmoph

Leto izdelave: 1977, stanje: generalkompletno obnovljen (rabljeno), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivelling heads. Drilling heads included on both sides at the front. Fedpfx Asd N Rb Djhmjph Very good condition. Available immediately.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: For processing PE, PP, or for producing three-layer pipes, or for pipe sheathing and stripe application The system was used for manufacturing heating pipes Condition: Very good 2 x WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe system is my property Location: Fjdehy Tp Dspfx Ahmjph Sachal EXTRUSIONSMACHINEN D-26345 Bockhorn/Grabstede, Germany