Stroj za rezkanje v orodjarni - Universal

SINN MS II D

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Nsdpfxou Dm E Hs Abbekt Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: rabljeno, Leto izdelave: 1989, Universal tool milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: - 3-axis active digital readout Nsdpfx Absr En Dysbekt HEIDENHAIN TNC 113 with active function on X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating manual Used, sold as seen, without warranty The technical condition of the machine corresponds to the standard of its year of manufacture.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Nkedpfofg E Hpox Abbst The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 1988, Krmiljenje Grundig x-hod 700 mm y-hod 500 mm z-hod 400 mm Teža stroja cca 2,8 t Nkodpfx Ajiqu S Eebbet +++++ Upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka ni mogoča. Naš oglas vsebuje tudi najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih fotografij žal ni mogoče. +++++

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Nodpfxsh Dwr Uj Abbekt Net weight: 1,870 kg Without cables and control cabinet. Supplement to the measurement report!

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW Njdponzpx Rofx Abbskt -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: rabljeno, Leto izdelave: 2004, Technical details: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle speed range: 63 – 3,150 rpm Stepless feed rate: 12–3000 / 6–1500 (Z) mm/min Quill stroke: 100 mm Head swiveling range: +/- 90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with linear control, mechanical handwheels, rotary tilting table +/- 45°, Nsdpfxjk Hdu Dj Abbokt hydraulic tool clamping, partial enclosure, coolant tank, manual

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Nkodpfxecxxx Hs Abbjt Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: rabljeno, Plate width: 2510 mm Plate depth: 5135 mm Plate height: 345 mm Weight: approx. 10 t Space requirement: approx. 2.5 x 5.1 x 0.38 m T-slot dimensions: 28 x 45 mm – Height: 48 mm Nkjdpfx Abohpvavjbst Number of T-slots: 9 Slot spacing: 220 mm Edge distance: 240 mm Slot size: 28 mm

Stanje: rabljeno, HYDRAULIC PRESS CAMP 250t Double-column press Piston stroke: 500 mm Table size: 570 x 570 mm Distance from table to piston: 600 mm Distance between columns: 570 mm Approach speed: 95 mm/sec Working speed: 7.5 mm/sec Nkodpfx Ajgr Ur Rjbbst Return speed: 135 mm/sec Motor power: 30 HP