Odklopnika

Siemens 3RV1021-0GA15

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.965 h, Funkcionalnost: popolnoma funkcionalen, moč: 30 kW (40,79 KM), volumenski pretok: 351 m³/h, tlak (maks.): 13 letvica, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, hladilni sušilnik, Rabljeni kompresor Atlas Copco GA30VSD+FF Integriran sušilnik Integriran pretvornik 30 kW 13 bar Gsdpfx Ajxu Ibcjb Esuh 5,85 m³/min Leto izdelave: 2014 Delovne ure: 43965

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), There are 3 Kaeser compressors, 2 Atlas Copco compressors, and 3 Kaeser refrigeration dryers available. 1) Kaeser Compressor CS 75, year of manufacture: 1992, operating pressure: 10 bar, operating hours: 38,265 h. 2) Kaeser Compressor AS 44, year of manufacture: 1999, operating pressure: 8.5 bar, operating hours: 41,564 h. 3) Kaeser Compressor BS 60, year of manufacture: 1983, operating pressure: 7.5 bar, operating hours: 50,674 h. 4) Atlas Copco Compressor GA 45, year of manufacture: 1990, operating pressure: 10 bar, operating hours: 26,831 h. 5) Atlas Copco Compressor GA 45, year of manufacture: 1990, operating pressure: 10 bar, operating hours: 52,447 h. Gsdpfxjulkvde Ab Ejuh 6) Kaeser Refrigeration Dryer TD 51, year of manufacture: 1997, refrigerant: R22. 7) Kaeser Refrigeration Dryer TF 171, year of manufacture: 2000, refrigerant: R134a. 8) Kaeser Refrigeration Dryer TE 76, year of manufacture: 1996, refrigerant: R22. Documentation is available. An on-site inspection is possible.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983,

Stanje: rabljeno, Leto izdelave: 2004, Vrsta kompresorja: Olje-vbrizgovalni vijačni kompresor z integriranim hladilnim sušilcem Moč motorja: 15 kW (20 KM) Napajalna napetost: 380 V / 50 Hz Obratovalni tlak: 7,5 bar Prostornina dostavljenega zraka (FAD): 798 m³/h (približno 13,3 m³/min) Glasnost: 68 dB(A) Prostornina rezervoarja: 400 litrov Guodpfswgca Tex Ab Eoh Dimenzije (D × Š × V): 1.000 × 660 × 1.400 mm Teža: 450 kg Hlajenje: Zračno hlajen Integriran sušilec: Da Krmilni sistem: Elektronikon®

Stanje: dober (rabljeno), Leto izdelave: 2013, Atlas Copco GA7 - 13 VSD Screw Compressor Fully automatic, internally fully piped and wired compact unit, single-stage, oil-injected compression, air-cooled, soundproofed. Final pressure: 13.00 bar Gusdpfewk Hcyex Ab Eoh Motor power: 7.50 kW Free air delivery: 1.26 m³/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, ATLAS COPCO GA22FF Screw Compressor – Machine with Air Dryer, Recently Serviced Technical Data: Capacity: 3.10 m³/min Motor Power: 22 kW Max Pressure: 9.5 bar Year of Manufacture: 2010 Operating Hours: 8,776h Price: €15,200 net €18,696 gross Gusdpjv Uyxksfx Ab Ejh The compressor is fully operational, ready for use, and covered by warranty. Service support provided.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 34.146 h, Atlas Copco GA15+ vijačni kompresor Gsdeybbchjpfx Ab Esuh Naprodaj je vijačni kompresor proizvajalca Atlas Copco, tip GA15+. Kompresor je idealen za industrijsko in obrtniško uporabo ter je znan po svoji zanesljivosti in vzdržljivosti. Tehnični podatki: Proizvajalec: Atlas Copco Tip: GA15+ Vrsta: vijačni kompresor Letnik: 2014 Delovne ure: 34.162 h Opomba: Vsi podatki so navedeni po najboljšem vedenju, vendar brez garancije. Za interes ali dodatna vprašanja sem vam na voljo.

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform Gjdpfxjyvnd No Ab Ejuh * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Zelo dobro ohranjena dvotlačna stiskalnica DL5 znamke Heuer Hammer. Takoj pripravljena za uporabo. Guedpfxoxzft Ne Ab Eeh

Stanje: rabljeno, Leto izdelave: 1968, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M10L/8556, Številka ponudbe: M10L/8556 Vrsta stroja: Stroj za izdelavo vijakov Informacije: zaprto rezilo Proizvajalec: NEDSCHROEF Tip: HPT6 Letnik proizvodnje: 1968 Območje premerov: 10-24 mm Število matic: 4 Število stopenj: 7 Dolžina segmenta: 200 mm Gsdpfx Abswi Uc So Eouh Dolžina vretena pod glavo: 160 mm Proizvodnja – kosov/min: 60 Maksimalna dolžina navoja: 95 mm Maksimalna širina ključa: 32 mm Potezna sila: 350 ton Lokacija: Na našem skladišču