Vijačni kompresor z vbrizgavanjem olja in integriranim hladilnim sušilnikom ATLAS COPCO GA15 FF

ATLAS COPCO GA15 FF

Leto izdelave: 2020, Stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Iodpsxdc Uvofx Af Tetb 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 302827, Federhenn profilové obráběcí centrum (vrtání a frézování) SBZ 100G – PRODÁVÁ SE VE SPOJENÍ SE SCHIRMER NC PILOU 1000-G4 ROK 2014 (KOMPLETNÍ LINKA), VIZ INZERÁT SCHIRMER...!! Iodjwnpa Njpfx Af Totb NC-podavač s chapadlem, max. rychlost 200 m/min, maximální délka profilů 3500 mm. Chapadlo je možné pneumaticky nastavit ve 2 osách pro přizpůsobení různým geometriím profilů. Obráběcí stanice koncipována jako G-modul se 2 servopohony v ose Y a Z. Připraveno pro až 14 obráběcích jednotek pro kompletní zpracování PVC, rámových, sloupkových a rámových profilů – vykladač se stolem 2500 x 1500 mm. PC-řízení C 6140, displej, software SBZ 100G, PLC+NC. Modem pro vzdálenou diagnostiku. Nakládací magazín s 9 pozicemi (9 profilů, délka 3500 mm), určený pro rámové profily max. šířky 127 mm. Čtečka čárových kódů. Horizontální pásový dopravník s 9 transportními nosníky s plynulým nastavením. Výkon 18 m/min, rozměry 3000 x 2400 mm. Jednotky: šroubovací jednotka, 2x vrtací jednotka pro hmoždinky nebo sloupkové otvory, 2x vrtací jednotka pro montážní otvory (16 750 ot./min), 2x speciální úpravy (značení uzavírací části), vrtací jednotka pro kování vchodových dveří (otvíravé dovnitř), vrtací jednotka pro olive (3 stupně), frézovací jednotka pro zámkovou skříň. 2 ks frézovacích jednotek pro frézování a vrtání drenážních štěrbin a větracích otvorů, 1 ks pod úhlem. Otočné zařízení (MD a AD okenní systémy). Frézovací jednotka pro frézování PZ a otvorů pro kliku.

Leto izdelave: 2000, Stanje: pripravljen za uporabo (rabljen), Operating pressure: 7.75 bar, air flow rate: 40.4 l/s, power: 15 kW, speed: 3,000 rpm, machine weight: approx. 450 kg. An on-site inspection is possible. Isdpfjwfg Hhox Af Tetb

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 20.000 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: GA11VSD+FF, Compressor compressed air system Atlas Copco Comprising: Compressor GA18 Plus, year 2007 Compressor GA11VSD+FF, year 2017 Control unit ES 6 Buyer is responsible for professional dismantling. Isdpfx Aevx Nmfsf Tjtb Forklift will be provided.

Stanje: novo, Delivery pressure: 10 bar Effective delivery rate: 252 L/min Tank capacity: 90 l / bar Number of cylinders: 1 unit Motor: 400 Volt / 1.5 kW Speed: 777 rpm Machine weight: approx. 70 kg Itodpfxevkiztj Af Tob Dimensions (L x W x H): 0.97 x 0.5 x 0.9 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Grafisk Maskinfabrik tilbageruller/skærer Iodpfxoipvhnj Af Totb

Leto izdelave: 2001, obratovalne ure: 123 h, Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Iodpfx Afjftdv Uo Tetb Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.240 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 135 l, barva: bela, Izhodni tok: 130 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 34 kW (46,23 KM), neprekinjena moč: 30 kW (40,79 KM), skupna dolžina: 2.200 mm, skupna širina: 950 mm, skupna višina: 1.230 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Deutz, Cummins, Ricardo, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant, and additionally soundproofed enclosure. The generator is equipped with an external Automatic Transfer Switch (ATS / Autostart) system and many other features listed later in the description. • Model – Proton ZPP 30R ATS • Maximum power – 34,000 Watt (34kW / 40 kVA) • Rated power – 30,000 Watt (30kW / 36 kVA) • Ready to operate – Yes • Type – Industrial generator set • Generator condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 liters per hour (at 75% maximum load) - 5.0 liters per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 4100 cc Direct injection Lubrication system – Forced, engine with oil pump Iodpfx Aotpvdtof Tjtb ⊳ ALTERNATOR: 100% copper winding AVR voltage stabilizer – Yes Alternator model – Proton 184H Rated output 400V – 30,000 Watt (30kW / 36 kVA) Maximum output 400V (up to 15 minutes) – 34,000 Watt (34kW / 40 kVA) Rated current (400V) – 140.0 A Current protection – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Soundproofed housing Weather-resistant housing Three-phase and single-phase sockets Fuel tank capacity – 135 liters Average runtime on full tank – 20 hours Transport set – Forklift slots and HDS transport hooks Dimensions: 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: AVR voltage stabilizer – Stamford SX460 (2%) - electronic voltage stabilization under variable load - electronic frequency stabilization Automatic generator set operation (ATS – Automatic Transfer Switch) Overload and thermal protection Oil pressure sensor, oil level sensor, coolant level sensor Glow plugs Oil pan heater Coolant heater Battery – 2 x 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Engine hour meter Ammeter Voltmeter Built-in PLC logic and editor Overload protection CAN module extensions Integration with SCADA systems Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and GPRS monitoring – Optional Modbus, Ethernet communication – Optional Why us? We are a company specializing exclusively in generator sets, with over 17 years of experience in the industry, constantly striving to ensure our products represent the highest quality and reliability. Throughout this time, we have delivered solutions to over 10,000 customers across Poland, including its most remote regions. We meticulously select the suppliers of our generator components, making sure they are leaders in their respective fields. We offer a wide range of generators from 6 to 300kW with various engines, including English Ricardo, American Cummins, and German Deutz, as well as custom configurations tailored to individual customer requirements.

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system Iodperkgy Usfx Af Tjtb - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Welding and Cleaning Line URBAN, still in operation Year of manufacture: 2001 - Ready for use, for sale directly from the client - Technically sound, ready to work (direct from client) - SV 494 CNC automatic cleaning unit with turning station - AKS 6110 welding machine - Conveyor belt (cooling station) Ijdpfx Afetr Duke Totb - Welding bead limitation: 0.2 - 2 mm