Separator NE / vrtinčni tok

SGM Magnetics T-VIS 100

Leto izdelave: 2021, Stanje: kot nova (razstavni stroj), Overband plate magnet Construction in stainless steel 1.4301, fully welded and sealed including drawer for cleaning 800 x 500 x 180 mm completely welded housing lifting eyes for suspension Ijdpfx Aed Evl Dsf Tstb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Itsdpfx Afevwlqqo Teb Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, The copper wire granulator can recycle scrap copper wire into separated copper and plastic. The processing capacity is 100–180 kg/h, and the dry mechanical shredding process causes no environmental pollution. For sale is the granulator, including a pre-shredder and a conveyor belt with magnet. Design and Manufacturing 99.99% Outstanding Efficiency and Reliability, Advanced Technology: ● Airflow gravity sorting system for separating copper particles from insulation. ● Powerful vibrating separator to ensure clean separation of copper granulate from insulation by weight. ● Self-cleaning dust collection system to minimize maintenance time and eliminate dust. ● Compact design with a small footprint. ● 99.99% pure copper recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical Specifications Model: GRS 180KG Voltage: 380V Power: 8.7 kW Frequency: 50 Hz Itjdpfx Aeu Tq S Hef Tjb Processing capacity: 100-180 kg/h Dimensions: 80*137*204 cm Net weight: 518 kg

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) Itodpfeua D Alsx Af Teb - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, Na prodaj je mobilna škarja za staro železo Lefort. Stroj je v zelo dobrem stanju in si ga je mogoče kadarkoli ogledati. Iodpfx Aox Elyasf Totb

Leto izdelave: 2025, Stanje: novo, številka stroja/vozila: Neumaschine auf Bestellung, Description: - Screening deck system consisting of 1 deck for screening minerals from pre-crushed material; maximum input grain size: 0–100 mm - Screening cut size: 0–30 mm - Throughput approx. 60 m³/h (material dependent) - Material separation into 2 fractions: 0–30 mm and oversize - To be mounted on customer’s own impact plates or subframe Technical Data:  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area 4.6 m², number of shafts: 24 units o Drive: 2 x 4.0 kW gear motors Itedsd Rbmkepfx Af Tjb o Screening body made of polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adjustment to other grain sizes possible) o Bearing lubrication routed to the outside; central lubrication system available as an option at extra cost  Colour: black RAL 9017 / green RAL 6018 or according to customer specification (at extra cost) Delivery time: approx. 20 weeks

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, moč: 320 kW (435,08 KM), Stationary shredding plant LINDNER Jupiter 3200. Electric drive: 2x 160 kW Including hydraulic unit, control cabinet. Drive belts new. Iedjwg Ev Depfx Af Tstb

Stanje: rabljeno, Infeed cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutter plates on tool holders Screen construction: heavy-duty screen basket, reinforced with ribs Itodpfx Afebq Stqs Tsb Screen perforation: 15 mm Counter knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Isdpfxovug Dyo Af Tstb Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, For optimal recovery of non-ferrous metals or material purification Iedpovdqdijfx Af Totb This extremely powerful machine is primarily used for the processing of municipal waste, shredder materials, household appliances, wood, plastics, glass, IBA and bottom ash, as well as electronic waste. The IMRO non-ferrous metal separator meets the demand for very high recovery rates and high purity levels.