Škarje za odpadke

Lefort Trax 1250

Leto izdelave: 2023, Stanje: novo, For sale: Alligator shear / cable shear, also suitable for metal processing. Model: AS/250 Max. Shear Force: 250 kN Cutting Length: 300 mm Max. Opening: 160 mm Hydraulic Pressure: 15 MPa Full Cycles per Minute: 10–15 cycles/min Power Consumption: 5.5 kW Weight: 450 kg Dimensions (L×W×H): 1200 × 980 × 1200 mm Psdpfx Ajku Ag Ssczspl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 367,75 kW (500,00 KM), vrsta goriva: dizel, konfiguracija osi: 8x4, medosna razdalja: 4.250 mm, gorivo: dizel, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, 🇬🇧 Iveco T-Way 500 Configuration CIFA RY 1300 ADVANCE Concrete Mixer • 25x8 mm anti-wear blade protection • Two manholes • 250 mm diameter loading rollers with rocker support • Central gearbox • 1,200 L water tank + 80 L oil tank • Water flow meter • Fast water coupling on both sides Ppedpfx Acjv Apf Nozol • Concrete consistency pressure gauge • Dual electro-hydraulic controls (one control panel in the truck cab and one removable rear panel with 3 m cable) • Two additional chute sections, with mounting brackets on the subframe • Overlapping blades, four-pitch at discharge point • Wear-resistant linings on loading hopper and discharge chute • Unit fully shot-blasted and protected with rust-proof primer • Water pump and chute lift cylinder, hydraulically operated from the distributor • Heat exchanger • Homologated folding rear underrun bar • Emergency Start/Stop buttons for vehicle engine Optional • No. 2 additional chute sections > EKOS CAP - POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS ZERO DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OPENING HOURS: MONDAY–FRIDAY: 8:30 AM / 7:00 PM SATURDAY: 8:30 AM / 2:00 PM WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA S-WAY-5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder-770s-limited edition-660 S semi-trailer-refrigerated semi-trailer tub - Lamberet-schmitz ISUZU-FLATBED-CRANE-TIPPER-CURTAIN SIDER-BOX-TAIL-LIFT PANEL BODY-REFRIGERATED CELL-INSULATED WITH FRIDGE - VAN

Leto izdelave: 2024, Stanje: novo, Air Separators ZIGZAG Application Description: Pedpfoua D Alsx Aczopl The ZIGZAG type air separator is a device designed for cleaning materials in the waste recycling process. The separator divides light and heavy fractions using a pneumatic method. It is suitable for a wide range of waste materials with particle sizes from 0 to 150 mm. This type of air separator is used for pre-shredded, torn, or very fine materials. Thanks to our unique design, the separator features multi-point adjustment options that are crucial for the purity of the obtained fractions. ZIGZAG type separators are utilized in many fields: - density classification of metal granules - cleaning shredded scrap from light fractions (films, plastics, paper) - removal of floating fractions during WEEE recycling - cleaning of plastics, rubber - cleaning of municipal waste and glass - dust removal Construction Description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first section, the ZIGZAG module is installed. The module features an inspection opening and an adjustable material stream gap. In the second section, there is a cyclone for extracting light fractions. Below the cyclone is a rotary valve with variable speed for the discharge of separated materials. At the top of the assembly is a fan with electronic speed control. The design is partially prepared for loading and unloading via belt conveyors. The separator comes with a control cabinet equipped with a safety system.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Elektromotor: 250 kW Ppsdpfx Acjq I Rkdozjl

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced Ppedpfxsvwlqqo Aczsl - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: novo, Josan & Söhne ‼️NEW – NOW WITH SIEMENS TOUCH SCREEN‼️ For even easier operation and control! Leasing available directly from us! Always with linear payment plans and no inflated final installment! 36 months term: rate factor 3.0694%. 48 months: rate factor 2.3697%. 60 months: rate factor 1.9456%. German quality, CE certified, EU-compliant, and available for live demonstration. We strongly recommend buying locally from Germany: German warranty, legal certainty, fixed prices, and later German-speaking support if required. All this only with machines purchased from us. You are welcome to arrange a viewing appointment with us to inspect our quality in person. Live demonstrations available. ‼️ Our new, globally unique model – exclusively available from us in Heilbronn. Water-cooled. Exceptionally efficient, clean copper granulate (99.7% purity). We are a German company operating under German law, offering top quality with warranty and after-sales service. Our German-speaking, certified technicians (with journeyman certificates) are available to assist at any point. Our own fleet of trucks, service vehicles, and immediate assistance with expert advice. Josan Recycling: Quality at an affordable price. Inspect our machines in person – don’t rely solely on photos and videos. We process copper ourselves and demonstrate this live. S600 with water cooling and fan system – developed and assembled by us in Germany. We offer tailored solutions for small businesses, mid-sized companies, start-ups, and large enterprises. Financing, hire purchase, or leasing are all possible. Our copper granulator systems process household, industrial, and telephone cables, achieving up to 99.7% copper separation rate. PVC fractions are also efficiently separated and the plastic can be sold to recyclers for further processing. Buy local cables and produce copper – recycle with environmental responsibility and save resources. Generate copper – and thus profit – with our recycling units. Our systems also allow separation of copper-aluminum radiators: Input ➡️ copper-aluminum radiators; Output ➡️ separated copper and aluminum. Also, all iron parts and screws are removed by a magnetic belt (pre-shredder required). Become your own copper refiner (miner) – produce copper in an environmentally friendly way. Because we use our own machines for copper recycling, our equipment is continuously upgraded, designed for long life, and always under ongoing development. Maintenance, spare parts, modifications, and upgrades are smoothly handled by our trained staff! Granulation Plant S600 ➡️ For cables from 1-40mm diameter ➡️ Up to approx. 500 kg/h input – with 50% copper content, you yield 5 kg of 99.7% pure copper granulate from 10 kg input, ready for profitable resale ➡️ Total connected load: 49 kW (excluding shredder) ➡️ Incl. separation tables ➡️ 380 Volt connection Podpewyx Rzofx Aczjpl ➡️ German-implemented accident prevention (UVV) ➡️ Magnetic belt included (for steel separation) ➡️ Uncompromising quality: We use only premium Siemens components for our control cabinets ➡️ The system can be configured individually – our team will be happy to advise you Price on request Subject to errors and changes. Images and descriptions may vary.

Stanje: dober (rabljeno), Leto izdelave: 1993, obratovalne ure: 604 h, Generator je v dobrem stanju, nahaja se na zalogi. Tehnične specifikacije so prikazane na tablici. Pjdpfx Asvkvvqsczopl

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Kompaktni drobilnik tip PYTHON-XL 1600, s 15 kW elektromotorjem, 400V 50Hz Ppedpef N Nlgefx Aczjl • Elektromotorni reduktor 15 kW, 400 V, 3 faze, 50 Hz 40 % večji navor v primerjavi s standardnim modelom PYTHON 1600 • Vhodna odprtina: 1600 x 1000 mm • Glavne dimenzije (D x Š x V): 2700 x 1400 x 2600 mm • Odprtina za izmet: 400 x 100 mm • Višina izmetne odprtine: cca 1000 mm • Električna krmilna omara z INVERTERJEM, glavnim stikalom, preklopnim stikalom (vklop/izklop) in varnostnim izklopom • Enostavno premikanje s pomočjo viličarja ali s transportnimi očesi • Teža: cca 2700 kg • Obsežna dokumentacija stroja/priročnik • Površinska zaščita v barvah RAL 3002 in RAL 7022 • (Pridržujemo si pravico do tehničnih sprememb) • CE certificirano in "Made in Holland"

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Ppedpfx Acefw Ah Rozel Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, The BTS-MF450HD Special Baling Press is the ideal solution for compacting challenging materials such as PET bottles, cans and metal containers, big bags, plastic canisters and plastic packaging. It is also capable of reducing used tires and car bumpers to a minimum volume. The baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for medium to high material throughput. Ppedpfxevug Dye Aczsl By compacting these waste and recyclable materials, you can achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the materials to the recycling cycle. Pressing force: 30 tons Bale weight: up to 450 kg (depending on material) Bale dimensions: 1000 H (var.) x 1200 W x 800 D mm Machine dimensions: 3343 H x 1781 W x 1196 D mm Machine weight: 1,600 kg Transport height: 2,300 mm Feed opening: 1200 W x 680 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB Special features: - Extra-long double cylinders for even and early compression of material - User-friendly lever operation - Bale ejector for easy removal of finished bales - Additional retention claws to minimize material spring-back - Fixture for 4 rolls of strapping - High-quality product "Made in Europe" Suitable for compacting: - PET bottles - Food cans and tin containers - Plastic canisters and plastic packaging - Used tires and bumpers - Big bags - Cardboard and film - Hard-to-compact recyclables Additional options: - Annual maintenance with UVV inspection - Machine color according to RAL - PLC control with automatic pressing cycle, bale-ready indicator and E-stop with key - Vertical door - Strapping bands / strapping wires - 11 kW, 32 Amp motor The demo video shows the BTS-MF550HD Special Baling Press. Can press, can baling press, PET baler, PET press, used tire press, tire baling press, tire press, can press, baling press, paper press, waste paper press, cardboard press, carton press, film press, paper baler, waste baling press, waste press, recyclable press, waste compactor, waste press, residual waste compactor.