Viličar za vse terene

Manitou MC25-4 Valid Inspection, *Guarantee, Diesel, 4x4 D

Stanje: rabljeno, številka stroja/vozila: MAN00000K01052899, Leto izdelave: 2021, obratovalne ure: 1.371 h, dvižna višina: 3.700 mm, vrsta goriva: dizel, moč: 37 kW (50,31 KM), proizvajalec motorjev: Kubota, Dvižna zmogljivost: 2.500 kg Gradbena višina: 209 cm Stanje sprednjih pnevmatik: 80 Stanje zadnjih pnevmatik: 80 Transportne dimenzije (D x Š x V): 4,19x1,45x2,08 Fsdpfxjw Rabzj Aflsft Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Fodpfxsd Ab H Hj Afljft Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: rabljeno, številka stroja/vozila: MAN00000C01086912, Leto izdelave: 2022, obratovalne ure: 407 h, dvižna višina: 3.700 mm, vrsta goriva: dizel, moč: 37 kW (50,31 KM), proizvajalec motorjev: Kubota, vrsta prenosa: hidrostat, Nosilnost: 2.500 kg Gradbena višina: 209 cm Stanje sprednjih pnevmatik: 0 Stanje zadnjih pnevmatik: 0 Fodjtvlqiepfx Aflsft Transportne mere (D x Š x V): 4,19 x 1,45 x 2,08 m Za dodatne informacije se obrnite na skupino PFEIFER.

Stanje: rabljeno, Leto izdelave: 2008, Technical Details: Length: 12,192 mm Width: 2,438 mm Height: 2,896 mm Weight: 4,580 kg Gross weight: 34,000 kg Payload: 29,420 kg Refrigerated container Internal dimensions: Length: 11,585 mm Fsdpfjt Hzhaex Afleft Width: 2,290 mm Height: 2,545 mm Number of pallet spaces: 23

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Ffedpod Hy Eljfx Aflst Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: rabljeno, Leto izdelave: 2023, nosilnost: 5.000 kg, dvižna višina: 3.770 mm, skupna dolžina: 5.930 mm, Diesel Forklift Linde H 50D-01/600 Drive: Diesel Year of manufacture: 2023 Lifting height (mm): 3,770 Load capacity (kg): 5,000 Fsdpfoxd El Rsx Afljft

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Skoraj nov sekalnik Vecoplan VTH 250x650 HxB Ffjdpjxtif Hofx Aflot Moč: 75 kW Cassel detektor kovin Približno 40 tekočih metrov vibrirajočih žlebov

Leto izdelave: 2023, Stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Ffjdpfx Afoncd Azolot Bearing: oversized roller bearings Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Leto izdelave: 1963, Stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Fsdpfx Ajh I Edvofloft

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: B11400640, Leto izdelave: 2017, obratovalne ure: 13.000 h, nosilnost: 42.000 kg, dvižna višina: 15.100 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 4.600 mm, moč: 256 kW (348,06 KM), lastna masa: 66.600 kg, vrsta pogona: Diesel, Full-Container Reachstacker Chassis number: B11400640 Mast type: Telescopic Transmission: ZF5WG261 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 20 - 40% Rear tires type: Pneumatic Rear tires size: 18.00-25 Rear tires condition: 0 - 20% Description: Good running and working condition. Fodpouh A Ebjfx Afljft Sideshift, Full cab, Air conditioning, Central lubrication, Camera, 30' auto stop, Air conditioning