Ploščadna žaga v kotni izvedbi

SELCO WNAR 650 TWIN PUSHER

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Hfjdeuc Idxjpfx Adkek Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Hsdpfx Adeukhd Aoksfk No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, številka stroja/vozila: 0-241-06-5232, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 12.608 h, največja višina reza: 125 mm, največja širina rezanja: 2.200 mm, dolžina rezanja (maks.): 4.300 mm, Panelna žaga Holzma HKL11/43/22 Hjdpsxfvp Aofx Adksfk Maksimalna širina reza: 4300 mm Maksimalna dolžina reza: 2200 mm Maksimalna višina reza: 125 mm Žaga je v stalni uporabi, zato jo je mogoče videti med delovanjem. Stroj bo na voljo od 02/03/2026.

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Hfjdpfx Ajw Naansdkok Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 9.974 h, skupna višina: 2.700 mm, skupna dolžina: 7.700 mm, skupna širina: 2.420 mm, Lastna teža: 7.390 kg CNC obdelovalni center SCM Morbidelli M-600 5-osna naprava Letnik izdelave: 2012 Številka stroja: AA2/002032 Delovni razpon osi X: 5020 mm Delovni razpon osi Y: 1680 mm Delovni razpon osi Z: 250 mm Število mest za orodje: 36 Vertikalni vrtalni vretena: 24 Programska oprema: SCM XILOG MAESTRO SCM PRISMA K SCM TTS-sistem Vreteno za rezanje, hlajeno s tekočino SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Vključno z vakuumsko črpalko Moč: 250 m3/h Razstavljeno za transport Teža: 7450 kg - Posebnosti: - Opis: Naprava javlja napako vretena. - Letnik izdelave: 2012 - Dokumentacija na voljo: Ne - CE oznaka: Da - CE certifikat: Ne - Serijska številka: AA2/002032 - Delovni čas: 9974 - Število vreten za rezanje [kos]: 1 - Vreteno za rezanje 1: - Število nadzorovanih osi [kos]: 5 - Vrsta mize za rezanje: konzolna miza - Vrtalno orodje: Da - Horizontalna vrtalna vretena [kos]: 6 - Vertikalna vrtalna vretena [kos]: 24 - Enota za žaganje: Da - Položaji menjalnika orodij [kos]: 36 - Sistem/programska oprema: SCM Maestro - Vakuumsko črpalko: Da - Število [kos]: 1 - Znamka: Becker - Kapaciteta [m³/h]: 250 - CNC možnosti: transportni trak - Delovni obseg X [mm]: 5020 - Delovni obseg Y [mm]: 1680 - Delovni obseg osi Z [mm]: 250 Hodpfewnhccex Adkjfk - Transportne dimenzije: 7700 mm x 2420 mm x 2700 mm (d x š x v) - Transportna teža [kg]: 7390 kg - Transportni paketi [kos]: 1 Finančne informacije Davek na dodano vrednost: Navedena cena je brez DDV DDV/davčna osnova: DDV je odbitljiv za podjetja Dobava in odkup so možni kadar koli za vse iz industrijskega sektorja Yorick Diebels

Stanje: rabljeno, Holz Her Sprint 1329 Black Edition močna izvedba – debelina robnega traku 0,4 – 8 mm (15 mm z zamenjavo orodja) 18,5-palčni upravljalni zaslon na dotik, barvni zaslon Power-PC motorizirana, položajno nadzorovana nastavitev višine mostu predrezalna enota za namestitev pred lepilno postajo avtomatska vodilna letev 1350 mm MOT avtomatski podajalnik robnega traku za zvitke in trakove MOT lepilna postaja GLU-JET – kartuše – granulirano lepilo + PU-lepljenje, tehnologija tankega filma višina robnega traku največ 60 mm nastavitev višine nanosa lepila / tipna šoba paket za visok sijaj tiskalna enota 1913 mot, motorično-pneumatska NC-servo os rezalna enota za zvitke in trakove do 15 mm debeline robnega traku z elektro-pnevmatskim preklopom kota rezalne žage od 0 do 10° multifunkcijna rezalna enota MOT 6 – NC-nadzorne osi: ravno rezanje 8 mm (15 mm) rezanje v obliki loka Hedpfszdzlmsx Adkefk rezanje pod kotom 0 – 15° kopirna rezalna enota MOT 4, kopiranje vogalov, postforming vogalov s 4 NC-nadzornimi osmi, za rezanje zgornjega in spodnjega roba ter kopiranje sprednjega in zadnjega, vertikalnega roba, višina delovanja 60 mm enota za strgalo MOT4 enota za strgalo za gladko obdelavo – končna obdelava enota za obdelavo z blazinco za dokončno čiščenje in poliranje robov z 2 tekstilnimi diski razpršilna naprava za vhodni in izhodni del ter antistatično sredstvo pri tiskalni enoti vhodni del – elektronsko nadzorovana naprava za razprševanje razdelilnega sredstva tiskalna enota – elektronsko nadzorovana naprava za razprševanje antistatičnega sredstva izhodni del – elektronsko nadzorovana naprava za razprševanje čistilnega sredstva s čistilnim sredstvom prva dobava 2018 / iz skladišča lizinga stroj je prenovljen v delavnici in je v ODLIČNEM STANJU na voljo v skladišču Lieboch

Stanje: rabljeno, številka stroja/vozila: 008357, Največja širina panela: 4400 mm Največja dolžina panela: 4300 mm Največji izvlek glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 9 Hsdpfjx A Tk Esx Adksfk

Stanje: rabljeno, Leto izdelave: 2008, 5-AXIS MACHINING CENTER BACCI MOD. TWIN JET – CE COMPLIANT – USED - Travel: X = 3400 mm Y = 1300 mm Z = 650 mm C +/- 180° A unlimited - 2 twin-spindle heads 10hp/ER32 - No. 2 loaders - No. 2 tables - 3+3 pneumatic clamps - No. 4 tables (300x120 mm) - Vacuum system prearrangement - Osai drives - OSAI control - PITAGORA Software ver. 5.9 Hfodpfx Adov Uw Hfjkjk - Windows XP - 3-side enclosure + roof - No. 2 inverters - Year 2008 - Complete with manual and CE declaration

Stanje: dober (rabljeno), Product line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robot BACCI FC 8 The automatic copy shaping and sanding machine performs milling and sanding operations on chair, table, armchair, sofa, bed, furniture, and frame components, delivering the best finish and highest performance. Maximum working length: 2700 mm Maximum working height: 180 mm Maximum working width: 500 mm Maximum working width with rounded end: 350 mm Maximum worktable speed: 15 m/min Maximum table return speed: 50–100 m/min Hfjdet Tw S Uopfx Adkok BACCI DOUBLE JET DOUBLE-JET is a dual machining centre with 6+6 interpolated CNC axes, equipped with a hopper conveyor system for automatic loading and unloading of parts.

Stanje: zelo dobro (rabljeno), Panel dividing saw – horizontal – with rear lifting table Control: MCS Evolution Software included Lifting table (mm): 4300 x 2200 No. of rear pushers: 2 (1 with grippers) No. of grippers: 8 Maximum cutting width (mm): 4200 Useful stroke of pusher (mm): 4200 Maximum saw blade projection (mm): 135 Maximum gripper opening (mm): 125 Scoring saw (max. blade diameter): 20 mm Main saw (max. blade diameter/output): 460 mm / 21 kW Adjustable saw carriage feed (m/min): 6 – 150 No. 1 front air cushion table with 90° rotation device (mm): 2100 x 4100 Total connected load (kW): approx. 36 Hfedsq Rffispfx Adkjk