Panožaga

SELCO WNA 610 Twin Pusher

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: nepreverjeno, moč: 19 kW (25,83 KM), potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.730 mm, število vreten: 20, Število orodnih postaj v orodni glavi 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverse beams: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X-direction: 2 Number of spindles for horizontal drilling in Y-direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW CNC controller model: PC85 EQUIPMENT CE marking Front safety cover Nodpfxeyttf Ss Advokw Note: Cones, cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6906

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2016, Funkcionalnost: nepreverjeno, največja debelina roba: 22 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: CE označba, The machine has the following configuration: Pre-milling unit automatic, time-controlled intervention and positioning via NC lamps for preheating the panel edge Edge magazine glue pot for EVA hot-melt adhesive pre-melter for EVA hot-melt adhesive QM-705 End trimming unit IN-801 Number of motors: 2 Top and Bottom Trimming Unit RS-100 Njdpfx Adsyxndbevskw Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Fine Trimming and Corner Rounding Unit RF-100 Number of motors: 2 Motor power: 2 kW Speed: 12,000 rpm Corner Rounding Aggregate AR30 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm automatic, time-controlled intervention Cut-off Saw RB02 Positioning via NC Glue Scraper RCC-701 Polishing Unit SP-501 Number of motors: 2 Motor power: 0.25 kW Spraying Unit LPT-700 TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 60 mm Edge thickness min.: 0.4 mm Edge thickness max.: 22 mm MACHINE DETAILS Total connected load: 22 kW EQUIPMENT Pressure with rubber band Panel support guides with positioning via NC CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7673

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, model krmilnika: POWER CONTROL PC22, največja hitrost vrtenja: 12.000 obr/min, Auction extended by one week due to updated technical data! TECHNICAL DETAILS Workpiece Dimensions Panel height: min. 12 mm Panel height: max. 60 mm Edge thickness: min. 0.4 mm Edge thickness: max. 20 mm Milling and Gluing Unit Pre-milling unit: available Motor power: 3 kW Speed: 9,000 rpm Adhesive container for EVA hot-melt glue Premelter for EVA hot-melt glue Edge Processing Unit 1 End trimming: available Number of motors: 2 Motor power: 0.80 kW Speed: 12,000 rpm Edge Processing Unit 2 Top and bottom rough flush trimming: available Number of motors: 2 Motor power: 1.5 kW Nkodpfxjyqx U Ho Advsw Speed: 12,000 rpm Edge Processing Unit 3 Corner rounding: available Number of motors: 2 Motor power: 0.4 kW Speed: 12,000 rpm Edge Processing Unit 4 Milling unit for roughing: available Motor power: 4 kW Speed: 9,000 rpm Edge Processing Unit 5 Edge scraper Edge Processing Unit 6 Glue scraper Edge Processing Unit 7 Polishing unit: available Number of motors: 2 Motor power: 0.18 kW Edge Processing Unit 8 Belt sanding unit: available Motor power: 1.5 kW Control software: POWER CONTROL PC22 Total connected load: 42 kW

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: nepreverjeno, moč: 25 kW (33,99 KM), višina obdelovanca (maks.): 60 mm, največja debelina roba: 12 mm, hitrost pomika os X: 18 m/min, Oprema: CE označba, TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Max. feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge heater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting to size Number of motors: 2 Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total installed power: 25 kW EQUIPMENT Panel support guide Spraying unit Control system with more than 20 control options CE marking The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 6216 Nedpfx Adsytr Rgovjkw

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 4.175 mm, pomik osi Y: 1.550 mm, višina obdelovanca (maks.): 40 mm, število vreten: 30, največja hitrost vožnje: 80.000 mm/min, TECHNICAL DETAILS Travel Range X-axis: 4,175 mm Travel Range Y-axis: 1,550 mm Traverse Speed X-axis: 80 m/min Traverse Speed Y-axis: 80 m/min Traverse Speed Z-axis: 30 m/min Max. Workpiece Height: 40 mm Number of Suction Traverse Bars: 8 Spindles Number of Spindles for Vertical Drilling: 20 Number of Spindles for Horizontal Drilling in X-direction: 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Positions: 18 Tool Magazine 2 Number of Positions: 10 EQUIPMENT NC Positioning Suction Units Vacuum Pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Nksdpfx Ajyttcwedvew External reference: 7350

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, moč: 55 kW (74,78 KM), Leto izdelave: 2010, največja hitrost vrtenja: 2.965 obr/min, TEHNIČNE PODROBNOSTI Število vrtljajev motorja: 2.965 vrt/min Maksimalni delovni tlak: 8,5 bar Sušilec zraka Model: ABT 102 sušilec stisnjenega zraka Maks. delovni tlak: 21 bar PODROBNOSTI STROJA KrMilni model: HMI PLC KAESER Moč motorja: 55 kW Obratovalna napetost: 400/460 V Stroj se prodaja in dostavi v dejanskem in pravnem stanju ("videno-kupljeno") na podlagi fotodokumentacije in tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico do ogleda blaga pred prevzemom in prevzema odgovornost za montažo, zaščito ter uporabo stroja na ciljni lokaciji. Zunanja referenca: 7548 Nkedpeyttk Ijfx Advjw

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) Nsdpoyttrxefx Advekw TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, model krmilnika: POWERCONTROL, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.200 mm, hitrost pomika os X: 80 m/min, TEHNIČNI PODATKI Največja širina panela: 2.200 mm Največja dolžina panela: 4.300 mm Največji iztek glavnega žaginega lista: 125 mm Največja hitrost pomika: 80 m/min Žagarska enota Največji premer orodja: 450 mm Moč motorja: 13,5 kW Gravirna enota Največji premer orodja: 180 mm Moč motorja: 2,2 kW PODROBNOSTI O STROJU Krmljenje: POWERCONTROL Nkjdpfx Asyttqzsdvew Obdelovalna miza Število nivojev dvižne mize: 4 Število vpenjalnih naprav: 10 Stroj se prodaja in dostavlja v dejanskem tehničnem in pravnem stanju („kot je viden in kupljen“) na podlagi fotodokumentacije in tehnične/komercialne opisne dokumentacije. Kupec ima pravico, da blago pred prevzemom pregleda, ter prevzema odgovornost za montažo, zaščito in uporabo stroja na ciljnem mestu. Zunanja referenca: 5552

Stanje: rabljeno, številka stroja/vozila: 005711, Max. panel width: 4500 mm Max. panel length: 2200 mm Max. main saw blade projection: 95 mm Nkjdshvm Dijpfx Advjw Number of longitudinal clamps: 5 Number of cross clamps: 8 Second flexible hold-down: yes