80T hidravlična stiskalnica

SCMB (licence Bliss) PHP 80

Stanje: rabljeno, Leto izdelave: 2007, Tlak 315 t Razmak stebrov 1750 mm Hod 700 mm Razdalja med mizo in batom, pri največjem hodu zgoraj, nastavitev zgoraj 1200 mm Površina mize 1600 x 1500 mm Vlečna blazina v mizi, tlak 125 t Vlečni hod blazine v mizi 200 mm Površina vlečne blazine 1200 x 1400 mm Višina mize nad tlemi 750 mm Površina bata 1640 x 1500 mm Pogonska moč 55,0 + 11,0 kW Iedevuukbjpfx Af Tetb Teža 29,5 t Prostorske dimenzije (ŠxGxV) 3,2 x 4,5 x 5,8 m Višina nad tlemi 5,1 m Letnik izdelave 1983 2007 modernizacija krmiljenja Siemens S 7 Odobreno za ročno polaganje v skladu s CE-standardom z oljno-hidravličnim pogonom, hidravlično vlečno blazino v mizi, hidravlično blažitvijo reza lahko se ponudi brez zagona, z zagonom v obstoječem stanju ali alternativno z novo krmilno enoto Siemens S 7-1500 F.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: HB 2022-A-073, Portal frame press with 300 T capacity a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500 x 1600 mm d) Clear opening height 700 mm e) Overall dimensions (LxWxH) approx. 4500 x 2300 x 3700 mm f) Oil temperature display on tank g) Lubrication via grease nipples h) Table in grid construction, with T-slots according to customer specification, otherwise 22 mm i) Controls mounted on a pivoting arm attached to the bridge j) Pressure adjustable from 50 T up to 300 T via MONITOR k) Bridge travel driven by two geared motors, rack and pinion drive l) Cylinder moves left and right via rack and pinion drive m) Machine body double-coated n) Cylinder induction-hardened Design Type: Gantry Press Thermally neutral 80–120 °C Number of operator sides: 3 Itjdoh Agnujpfx Af Tsb Forces Maximum pressing force: 3,000 kN Maximum free tear-off force: 500 kN Pressure build-up time (closed die, steel on steel): Max. 3 sec Dimensions Maximum opening width: 700 mm Stroke and min. opening: 700 mm / 0 mm Table height above floor: approx. 980 mm Height above floor (overall height): approx. 3700 mm Minimum hall height: 5,000 mm Deflection Measured at maximum closing force with 70% occupancy: ≤ 0.8 mm/m Weight Total weight of press (without operating fluids and table plate): approx. 22 T Speeds Rapid closing: 17 mm/sec Pressing speed: 8 mm/sec Opening: 55 mm/sec Sound Pressure Sound level measured at 1.5 m height at control panel: max. 78 dB(A) DIN 45635-T16-KL3 Hydraulics Number of press cylinders: 1 Operating pressure: max. 350 bar Pressing pressure build-up time: 2-3 sec Pressure accuracy during pressing stroke: +/- 5 bar Main Pump BOSCH REXROTH, approx. 93 L/min Oil volume: HLPD 46 MW, 900 liters Ambient temperature: max. 45 °C Oil temperature: max. 55 °C Electrics Main supply: 400 V AC Control voltage: 24 V DC Frequency: 50 Hz Connection for hydraulic main motor: IE3, 22 kW Total connected load: approx. 30 kW

Stanje: rabljeno, Leto izdelave: 2005, Tlak 800 t Razmak između stupova 2560 mm Hod 1050 mm Udaljenost stol/klip, hod gore 1870 mm Površina stola 2500 x 1730 mm Tlak vučne jastuke u stolu 300 t Hod vučnog jastuka u stolu 395 mm Površina vučnog jastuka u stolu 2300 x 1300 mm Površina klipa 2500 x 1730 mm Tlak vučnog jastuka u klipu 63 t Itsdpfxjvuuiks Af Tob Hod vučnog jastuka u klipu 150 mm Bočni prolaz između stupova 1000 mm Kapacitet ulja 4300 l Snaga pogona 200,0 kW Dimenzije (ŠxDxV) 4,1 x 2,8 x 10,0 m Visina iznad poda 7,0 m Godina proizvodnje 1974 Generalno obnovljen 2005: bivši BZE 800, prepravljen od strane proizvođača sa novim klipom i novim cilindrom na ZE 800 sa uljno-hidrauličkim pogonom, hidraulički kontroliranim vučnim jastukom u stolu i klipu rastavljen i uskladišten - video kod prodavatelja dostupan prije demontaže

Stanje: rabljeno, Pressione: 600 TON Punti di pressione: n°2 Modello: AF 600 MB 30-60 Anno di costruzione: 1994 Dimensioni piano di lavoro: 3.000 x 1.600 mm Dimensioni slitta: 3.000 x 1.600 mm Luce frontale: 3.000 mm Luce laterale: 1.200 mm Regolazione slitta: 150 mm Itsdpfsq N Ettjx Af Tob Colpi al minuto: 20 c/min Corsa: 500 mm Apertura stampo a PMI: 1.118 mm Potenza motore principale: 30 kW Sistema di sicurezza idraulica: presente Peso: 110 ton

Leto izdelave: 1990, Stanje: rabljeno, Pressure: 250 t Clear width between uprights: 1,100 mm Itedpjlp U I Eefx Af Tob Stroke: 400 mm Installation height: 600 mm Table area: 1,000 x 800 mm Ram area: 1,000 x 800 mm Table height: 950 mm Total power requirement: 65 kW Machine weight approx.: 25 t Space requirement approx. (W x D x H): 0000 x 0000 x 3,900 mm NC control Stroke cushioning Light barrier control Central lubrication Rapid traverse / working feed 8-fold prism guide

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, vgradna višina: 700 mm, stiskalna sila: 250 t, širina mize: 1.250 mm, dolžina mize: 1.150 mm, hod blazine orodja: 150 mm, hod: 400 mm, Hydraulic Double Column Press DUNKES HDS 250/10 Year of manufacture: 1992 Technical specifications: Pressing force at 260 bar: 250 t Rapid approach speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Drawing cushion area approx.: 800 x 1000 mm Drawing cushion pressing force (200 bar): 100 t Drawing cushion stroke: 150 mm Power requirement: 45 kW Installation height: 700 mm Itsdpfxjup Si Hj Af Teb Ram stroke: 400 mm Control upgrade to SIEMENS (in 2005) Machine height approx. 5,400 mm Control panel language currently in Polish

Stanje: rabljeno, Leto izdelave: 1973, Pressure: 1600 t Upright spacing: 3160 mm Ram stroke: 1450 mm Isdpfxevxwhwo Af Tstb Distance table/blank holder, max. stroke up, upper adjustment: 2250 mm Table area: 4000 x 2200 mm Ram force: 1000 t Blank holder force: 600 t Blank holder stroke with lower adjustment: 1000 mm Blank holder stroke with adjustment 0-100 mm: 1450 mm Blank holder area: 4000 x 2200 mm Cushion force in table: 360 t Cushion stroke in table: 275 / 400 mm Ram area: 4000 x 2200 mm Lateral column passage: 1100 mm Table cushion: hydraulic, controlled Ram cushion: hydraulic, controlled Oil capacity: 9000 l Total power requirement: 390 kW Machine weight approx. 250 t Space requirement approx. 6.0 x 4.3 x 10.5 m Head Press (1600 tons) of a press line with five follow-on presses (800 tons each)

Stanje: pripravljen za uporabo (rabljen), Z električnim zadnjim prislonom Ploščina prebijanja: 70 ton Premer x debelina pločevine: Ø 28 x 20 mm Maksimalni hod: 80 mm 40 hodov/min Itsdpoxgv E Tefx Af Teb Globina grla: 300 mm Delovna višina: 1065 mm Maksimalna debelina reza v pločevini: 20 mm Dolžina rezila: 455 mm 90° rez: 130 x 130 x 13 mm 45° rez: 90 x 90 x 10 mm Po meri rezan okroglo/kvadratno: 45 mm Elektromotor (moč): 7,5 kW Dolžina: 1800 mm Globina: 1200 mm Višina: 2000 mm Teža: 1650 kg

Stanje: rabljeno, Leto izdelave: 1993, Pressure 500 t Column spacing 2240 mm Stroke 1180 mm Distance table/ram, max. stroke up, ram raised 1800 mm Table size 2050 x 1800 mm Blankholder force in table 250 t Blankholder stroke in table 380 mm Blankholder area in table 1800 x 1200 mm Blankholder force in ram 122 t Blankholder stroke in ram 200 mm Blankholder area in ram 1800 x 1200 mm Ram area 2215 x 1800 mm Table height above floor 500 mm Downward speed from 400 mm/s Upward speed 10 - 400 mm/s Working speed 10 - 100 mm/s Foundation depth 3.0 m Drive power 122 + 75 + 64.5 kW Weight 110.0 t Space requirements (W x D x H) 3.6 x 2.2 x 8.5 m Height above floor 6.8 m Approved for manual feeding operations in accordance with German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic blankholder in table and ram, shock absorption, ram locking Itedpjvuk I Nofx Af Tjb Foundation depth approx. 3.0 m Currently the press is being overhauled with Siemens S7 control / Pilz safety control A sister machine in as-is, partly dismantled condition can also be offered

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: nepreverjeno, skupna višina: 6.400 mm, skupna širina: 4.500 mm, skupna dolžina: 3.800 mm, obratovalna hitrost: 110 mm/s, hitrost vzvratne vožnje: 180 mm/s, tabela razdalj do bata: 1.500 mm, We are offering a newly-built version of the machine shown here. The machine was commissioned in 2020 and can be inspected at the customer's site. Technical Data: Pressing force (T): 800 Itedpfx Afowlrv Ue Tob Opening force (T): 80 Motor power (kW): 55/75 + 55/75 Ram stroke: 1000 mm Rapid approach speed (mm/s): 110 Working speed (mm/s): 6 Return speed (mm/s): 180 Guide column diameter (mm): 250 Maximum pressure (bar): 250 Usable table area (mm): 3,500 x 2,000 Lower table displacement (mm): 2,000 Distance between columns (mm): 2,000 Open height (mm): 1,500 Total width (front) (mm): 3,800 Total width (side) (mm): 4,500 Overall height (mm): 6,400 Weight (kg): 134,600 The MV-800E/NC-SINCRO press is specially designed for the setup and testing of dies, molds, and punches. The four columns with 250 mm diameter, made from C45E steel, are manufactured specifically to withstand high stress. It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The press complies with all essential safety and health requirements pursuant to CE standards. STRUCTURE AND TABLE • A frame capable of withstanding 600 T of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC UNIT • Two double-acting hydraulic cylinders, each with 400 T capacity. • Single-stage hydraulic power unit with automatic shutoff of rapid approach speed and independent operation. Equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table control movement; an electronic synchro system compensates for off-center or unbalanced forces. • The press features a lateral pressure switch for optimal job-specific pressure adjustment. • Glycerine manometer with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical installation for operation with 1 or 2 speeds for the main cylinder feed. • The press features both manual and automatic cycles (selectable via test mode switch): • The manual cycle allows all press movements to be performed step-by-step at low speed. • The automatic cycle enables the press to execute a full production cycle. • Electrical safety system for the fall protection of the upper table. • Lower table with hydraulic withdrawal and physical stops. • The machine is equipped with a control panel featuring a touchscreen display for entering operating and calibration parameters. • Two 1,000 mm optical safety barriers (Class IV) are installed at the front and rear. • All Siemens electrical components are IP55-rated and manufactured according to current CE directives and regulations. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-checking devices for functionality and safety. Includes testing and certification of proper functionality and the safety distance of the light curtains. • Safety is further ensured by a laser and Class IV light curtain area protection system.