Enostranski stroj za robove

SCM STEFANI KDR

Stanje: rabljeno, številka stroja/vozila: 007983, Pozicija 1: Eno-stranski lepilni stroj za robove SCM-STEFANI KDR Pozicija 2: Sistem za vračanje plošč SCM-STEFANI KDR Codpfx Afewqndljnepw

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) Cedpfowb Allox Afnopw

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Cpjdpfjw H Iv Tjx Afnew Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Codpewt Snyofx Afnjpw Front safety and protection system with mats and safety nets Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: rabljeno, Leto izdelave: 2016, Vitap Eclipse Kantenanleimmaschine für runde, gebogene Werkstücke Halbautomatische Kantenanleimmaschine für große, runde oder gebogene Werkstücke mit einer Plattenstärke von 10 bis 60 mm und einer Bandstärke von 1 bis 3 mm. Die Höhe von 60 mm ist nur bei einer Kantenbandstärke von 1 mm möglich. Bei stärkerem Kantenband hängt es von der Qualität des Bandes ab und muss in Verbindung mit dem Schneidaggregat vorab getestet werden. Beschreibung: - Zwei Kopierrollen zur Abtastung der Werkstückkontur - Leimstation - Leimbecken mit 1 kg Fassungsvermögen - Zwei 800W-Heizelemente mit elektronischer Temperaturanzeige über die SPS - Leimauftragung durch Leimwalze - Leimbecken aus Aluminium zur optimalen Wärmeverteilung - Leimzufuhr per Knopfdruck regulierbar - Automatische Schereinheit für Kantenmaterial von der Rolle mit Breiten zwischen 3 und 45 mm - Aggregat wird über Sensor für geschlossene Kantenanleimung oder über Encoder bei einseitiger Bekantung gesteuert - Lasersystem für Längenermittlung, keine Vormessung notwendig - Zu-/Abschaltmöglichkeit für Durchlaufbetrieb - Höhenverstellbarer Tisch für schmale Paneele - Zu-/Abschaltmöglichkeit für das Fräsaggregat - Zwei Kopierrollen zur Abtastung der Werkstückgeometrie - Fräsaggregat ausgestattet mit 2 x 0,5 kW (15.000 U/min Hochfrequenz) und oberen, unteren sowie vorderen Kopierrollen - Fräsaggregat mit Messern R=2, Phase 15°, D=69, Z=6 - Großzügiger Plattenteller mit Vakuum zur Fixierung des Werkstücks (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Cpjdpfxjwgb Hxj Afnjw Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: novo, Leto izdelave: 2024,

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Cpsdsxranpspfx Afnsw Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: rabljeno, številka stroja/vozila: 007687, Type of applied edge: thin edge, thick edge, solid wood Gluing system: EVA, hot air Joint trimming: yes Multi-function unit: yes Cpedpfx Afewuz Nponow Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 units

Stanje: pripravljen za uporabo (rabljen), Tehnične lastnosti X-os potovanje: 3290 mm Y-os potovanje: 1100 mm Z-os potovanje: 326 mm Prehod kosa: 170 mm Elektrovreteno: 5-osno vreteno, 11 kW HSK F63 vpenjalna glava Revolverski menjalnik orodij, 16 orodnih mest Magazin za orodja na koncu delovne površine, 10 orodnih mest Vrtalna enota BH26 2L: Cpjdpfouaz H Iex Afnsw Navpična in vodoravna vrtalna enota + enota za rezkanje 16 navpičnih svedrov, razmak med centri 32 mm (8 v smeri X in 8 v smeri Y) 8 vodoravnih svedrov, razmak 32 mm (4 v smeri X in 4 v smeri Y) 2 rezkalni plošči, premer 120 mm, za utore v smeri X in Y (učinkovit rez 25 mm) Neodvisna vrtalna enota Z za optimizacijo časov obdelave Delovna površina: NC-krmiljena delovna miza z motoriziranimi pomičnimi nosilci 6 ATS nosilcev z avtomatskim pozicioniranjem (EPS) in sesalnimi čašami 3 vrtljive sesalne čaše z motoriziranim premikom na nosilec 1 vakuumska črpalka 250 m³/h Krmiljenje: Na Windows računalniku RM850 daljinski upravljalnik z integriranim LCD zaslonom 2 pedala za zagon cikla Krmiljenje prek programske opreme BiesseWorks BiesseWorks Advanced strojna različica: Programiranje in optimizacija vrtanja, razreza, rezkanja, poti orodja in menjave orodij Prilagodljive parametrične makro funkcije Uvoz datotek prek omrežja in/ali USB 3D simulacija kosa in poti orodja Parametrično programiranje obdelovanca Upravljanje trkov Priložen komplet orodij in parametrične konusne glave Električna napetost in motorji Napetost: 400 V Priključitev: trifazna Moč: 17 kW Motor: 18 KM Skupne dimenzije Dolžina: 5412–5912 mm Širina: 5120 mm Višina: 2910 mm

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Milling spindle, non-interchangeable: 30 mm Clamping height: 140 mm Height adjustment: 140 mm Extraction ports: 2 x ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with a permanently installed, double-tilting spindle for a tilting range from -5° to +45.5° Operation via handwheel located at the base of the machine Height and tilt adjustment through handwheels Analogue gauges for height and tilt adjustment 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning system Electronic speed display Push buttons for spindle start/stop Forward and reverse spindle rotation Quick-change cutter clamping system Finely planed cast iron table Controls are clearly visible and easily accessible at the machine body base Cpjdpogz Sifefx Afnew Fence 215, total adjustment via handwheel, including multiplex fence plates Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa CE certified GS certified