Večrezna žaga

SCM M 3

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax twf 55 es M 3 UP Professional woodworking machine featuring motorized spindle height and tilt adjustment, four speeds, and electronic control system. Article Number: 5502266 Brand: Holzkraft / SCM EQUIPMENT Equipment: Aluminium sliding table ✔ Fodpfehp Rc Ijx Aa Hsgk Handle on sliding table ✔ Fence: FLEX ONE: Heavy-duty professional version, automatic adjustment of the entire fence based on tool diameter, manual chip removal adjustment, swiveling device, aluminum fence jaws with connecting strips Spindle height adjustment: Motorized Telescopic mitre fence: With two flip stops Spindle tilt adjustment: Motorized Outrigger table: ✔ Control system: Ready 3: Programmed spindle unit movement in two axes, automatic fence adjustment based on tool diameter, stepless adjustment via switch or automatic positioning system Curved workpiece guard ✔ Control element position: Pivoting control panel at eye level Eccentric clamp TECHNICAL DATA Dimensions and Weights: Length (product) approx.: 1200 mm Net weight approx.: 510 kg Width/Depth (product) approx.: 2000 mm Extraction Connection: Extraction port diameter: 2 x 120 mm Worktable: Table length: 1200 mm Sliding table length: 1200 mm Table width: 530 mm Sliding table width: 360 mm Table height: 900 mm Sliding table height: 142 mm Installation Information: Space required (length): 2800 mm Machine body width/depth: 846 mm Space required (width/depth): 2910 mm Working area (length): 1600 mm Note on space requirement: Dimensions take into account maximum travel or usable lengths. Working area (width/depth): 2300 mm Machine body length: 1200 mm Note on working area: Please add the specified dimensions to the space requirement to obtain the recommended installation area for the machine. Electrical Data: Connection voltage: 400V Main motor power: 5.0 kW Mains frequency: 50 Hz Spindle: Spindle tilt: 0 to -45° Spindle speed display: Shown on control display Usable spindle length: 125 mm Spindle shaft diameter: 30 mm Spindle speeds: 3500/6000/8000/10000 rpm Cutter Head Diameter Maximum: Max. tool diameter: 240 mm Max. tool diameter (profile milling): 240 mm Max. tool diameter (retractable): 230 mm

Leto izdelave: 1980, Stanje: pripravljen za uporabo (rabljen), An old Brunner drying chamber (approx. 40 years old) is available. External dimensions X/Y: approx. 6000mm/8000mm. An on-site inspection is possible. Fodovbigwopfx Aa Hsgk

Stanje: rabljeno, Leto izdelave: 2019, including tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center comes with a comprehensive array of milling and drilling tools to meet any woodworking requirement. - Highly efficient: equipped with drilling spindles running at 8,000 rpm and the industry's most robust spindle technology, offering over 1,000 maintenance-free operating hours. - Optimal and completely equipped: the suction cups can be individually configured on the TV FLEX worktable, allowing the machine to be tailored precisely to your needs. - Easy and intuitive programming thanks to integrated Cad-Cam MAESTRO CNC software. - User-friendly operation: the lowered machine frame provides easy access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine bed. In the PRO SPACE version, no additional protective infrastructure is required. Supporting structure The supporting frame is made from an exceptionally sturdy, monolithic steel base, heavily ribbed and extremely robust. The extra-wide support surface is specially designed to give the machine maximum stability and to ensure constant precision under all working conditions. No floor anchoring is required. The base forms a large and solid support for the moving gantry. The machining unit is equipped with a balanced, stable, and highly durable support structure that withstands heavy loads, guaranteeing top-tier performance and superior accuracy. The moving gantry is made from a single, solid piece, anchored to the base, and runs on premium prismatic rails with ball-bearing carriages. The machining unit is attached to this and moves in the Y and Z axes, also on prismatic rails with ball-bearing carriages. The movement of the lower mobile unit (X axis) and the machining unit along the gantry (Y axis) is ensured by a rack-and-pinion drive with helical gears, resulting in greater tooth engagement for increased acceleration and higher speeds along the X and Y axes. The specially designed helical gearing reduces wear on mechanical parts and enables quieter operation. The vertical Z-axis is driven by a ball screw, which ensures perfect balance under dynamic load, as well as high acceleration and deceleration speeds. The main milling unit is directly coupled to the Z-axis carriage, providing extremely fine processing quality by eliminating vibrations. The X-Y-Z axis movements are driven by brushless motors powered by static inverters, which provide: Fgodevvi Scjpfx Aa Hsk - Shorter machining times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No setup required upon machine start-up due to absolute encoders - Elimination of general maintenance work as the brushless system has no brushes The control and management of all axes and working elements is handled via e

Stanje: dober (rabljeno), Leto izdelave: 2000, SCM M3 Track Multi-blade Saw No. 4 – Made in Italy – Year of manufacture: 2000 – Documentation included TECHNICAL SPECIFICATIONS: Track width: 300 mm Cutting height: 120 mm Motor power: 25 kW Max. blade diameter: 350 mm Max. workpiece width: 1000 mm Fedeg Tdfdjpfx Aa Hogk Min. workpiece length: 400 mm Feed rate adjustable via inverter Pneumatically adjustable right-side fence Turret-type fence adjustment – 6 positions Three rows of anti-kickback fingers Option to fit a board - shoe Spindle diameter: 50 mm Sleeve diameter: 70 mm Sleeve equipped with spacers Automatic central lubrication Four upper feed rollers Extraction port diameter: 180 mm and 120 mm Machine dimensions (L/W/H): 210 / 175 / 160 cm Weight: 1800 kg

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Wurster & Dietz edger and trimming machine Type FR7 with in-machine adjustment Fgjdev I D Shspfx Aa Hsk Star-delta soft start Infeed roller table Single-layer spiral roller slab separator Slab discharge into roll-off trolley Main material on pull-off roller table

Stanje: rabljeno, Leto izdelave: 2003, Kalibrirno-brusilni stroj SCM SANDYA 20 model 20 M3 135, rabljen leto izdelave: 2003 serijska št.: AE/024903 maksimalna delovna širina: 1350 mm Fgsdpfx Aexwbydja Hsk hitrost podajanja: 3,5-18 m/min z inverterjem delovna višina: 4-170 mm vakumska miza: 7,5 kW Sestava: I. grupa: kalibrirni valj iz utorjenega jekla D. 250 – motor 22 kW II. grupa: brusni valj d. 250, trdota 45 SH – motor z dvema hitrostma 9/11 kW vrtljaji 1400/2800 III. grupa: kombinirani valj d. 170, trdota 30 SH + elastična segmentna blazinica s 46 sektorji – motor 11 kW z inverterjem IV. grupa: satinirni valj Scotch-Brite Pozicionirna miza z obdelovancem dimenzija trakov: 2620 x 1370 mm pihala za II. in III. trak samodejno centriranje transporterja elektronsko upravljanje I./II./III. valja/blazinice

Stanje: rabljeno, Leto izdelave: 2001, številka stroja/vozila: AB145642, MULTIBLADE CIRCULAR SAW SCM MOD. M3 – USED – CE COMPLIANT - Year of manufacture: 2001 - Serial number: AB145642 - Supply voltage: 400 V / 50 Hz - Motor power: 18.5 kW - Blade rotation speed: 4,200 rpm - Maximum blade pack width: 300 mm - Conveyor width: 300 mm - Maximum blade diameter: 350 mm - Minimum blade diameter: 200 mm - Minimum workpiece length: 390 mm - Blade arbor hole diameter: 70 mm - Arbor key dimensions: 20 x 5 mm - Distance from machine base to first right blade: 200 mm - Conveyor feed speed: infinitely adjustable from 6 to 48 m/min - Conveyor type: with direct-joint nodular cast iron shoes - Conveyor guide rails: low-friction coefficient, one prismatic guide - Conveyor lubrication: automatic - Clutch: fitted on feed speed variator Fgedpfx Ajwr Elpsa Hsk - Working table height from floor: 750 mm - Working table dimensions: 1,530 x 950 mm - Blade dust extraction port diameter: 200 mm - Conveyor dust extraction port diameter: 120 mm - Air extraction volume (at 25 m/sec): 3,850 m³/h - Programmable fence: with turret stops, pneumatically positioned via foot pedal - Reference laser: for cutting line - Machine base: solid cast-iron monoblock construction

Stanje: rabljeno, Leto izdelave: 1994, Doppelte Wellen-Mehrblattsäge - Hersteller: A.Costa - Modell: Jaguar - Maximale Schnitthöhe: 200 mm Fgodpotqld Usfx Aa Hjk

Stanje: rabljeno, Dvojni robilnik SCM M3, v dobrem stanju, širina reza 300 mm, višina reza 100 mm Fsdpfexlnpnox Aa Hegk

Stanje: skoraj kot novo (rabljeno), I am purchasing a multi-blade saw of Italian make, SCM M3. Cutting height under the blade: 120mm (adjustable). Maximum cutting width on the feed conveyor: 300mm. Open design / allows insertion of wider workpieces. Motor: 20 kW. Maximum main saw blade diameter: 350mm. Fsdpfjvll Ekox Aa Hogk Feed speed controlled by variator. Total weight approx. 1770kg. Comes with blades and spacers. Feed belt in very good condition. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Stanje: dober (rabljeno), Multiblade Saw Gabbiani SA 300 – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8-56 m/min disc diameter: 300 mm spindle diameter: 50 mm sleeve diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm Fgjdpfx Aaehcwrks Hjk three rows of kickback pawls height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Stanje: zelo dobro (rabljeno), track width 300mm cutting height 120mm Fedow A Hz Hopfx Aa Hsgk maximum blade diameter 350mm variable feed speed adjustment manual adjustment of top/bottom pressure rollers manual adjustment of shaft height power supply 380V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, track width 300 mm cutting height 120 mm max. blade diameter 350 mm Fgedswxrrvepfx Aa Hsk motor power 30 kW table width 750 mm feed rate adjustable via inverter fence adjustable pneumatically

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, automatic wide belt sander with 2 belts for lacquers, wood, veneer, composites, and various materials Machine can be integrated into a production line Technical specifications: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st Group: Sanding roller diameter 320 mm - grit 60 - blower cleaning belts - 11 kW motor with variator 2nd Group: Sanding roller diameter 320 mm - grit 40 - blower cleaning belts - 11 kW motor with variator Scotch Brite - 1.5 kW motor Fgsdsgmbu Iepfx Aa Hek Vacuum table Belt speed variator: 4–19 m/min Operating pressure: 7 bar External dimensions: Machine: 2000 x 2750 x 2200 mm Vacuum pump: 800 x 700 x 900 h mm

Stanje: zelo dobro (rabljeno), SCM M3 Chain Track Multi-rip Saw Track width: 300 mm Maximum cutting height: 120 mm Fjdpfx Aaom Rg Dgo Hjgk Main motor power: 37 kW Feed speed adjustable via variator: 6–45 m/min Saw blade diameter max/min: 350/200 mm Maximum workpiece width: 1,000 mm Minimum workpiece length: 600 mm 3 rows of anti-kickback pawls Spindle diameter: 50 mm Sleeve diameter: 70 mm Centralized track lubrication CE certificate Extraction outlet: 200 mm