5-osni obdelovalni center

SCM ACCORD WD

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) Nodpfsvu Hgbox Ag Towc via nozzles directly at the radii ...

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Special accessories at extra charge: Njdpevnv Uhjfx Ag Tjwc Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- ...

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s Nwedsvnv Tqspfx Ag Toc - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. Nwsdpfxjvvkipe Ag Toc - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: zelo dobro (rabljeno), ITALMECCANICA PROFILWOOD MAK6B sanding machine 6 sanding units, each with 1.5 kW Max. working width: 250 mm Depth: 0 - 250 mm (minimum) Dimensions (L x W x H): approx. 4700 x 2000 x 2300 mm Weight: approx. 3000 kg Nsdpedykwlsfx Ag Tewc (Makor, Delle Vedove, Venjakob, Flader)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ročni upravljalni deli z 20-metrskim kablom Nedpfx Agexg Rn Nj Tewc

Leto izdelave: 2022, Stanje: rabljeno, Number of sanding units: 6 pcs. Sanding width: 45-165 mm Sanding height max.: 45-92 mm Weight: 2,200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Long description as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It features 2 top sanding discs and 2 bottom sanding discs, each combined with a brush unit. Technical manufacturer description: Ecoline Q-Sand: the ideal sander for scantlings and more. Developed to operate on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, flap brushes, and a double disc for more effective material removal, improving adhesion for subsequent treatments. Q-Sand can be installed in a production line or used as a stand-alone solution due to its full operational autonomy. It is also ideal for window frames, beams, and bespoke products, optimizing processing times with automated systems and advanced production control. ----- Njdpfx Aoxyafkjg Tswc Price for the above-mentioned machine on request! ----- (Technical data according to manufacturer - no guarantee!) All prices are net, plus statutory VAT. The video is from the manufacturer Ecoline and shows a new machine.