Snežni plug z nastavkom za vilice

Schmidt FOH

Stanje: rabljeno, obratovalne ure: 2.572 h, The Tennant M30 boosts productivity by delivering exceptional sweeping and scrubbing performance, while also promoting improved health and safety. The machine is easy to operate and maintain, and swiftly enhances your facility’s image by cleaning in a single pass (wet or dry). Furthermore, the machine cleans up to three times longer on a single water tank, utilizing Tennant’s innovative ec-H2O technology that uses up to 70% less water. This Tennant M30 comes standard with: - Complete maintenance service, - New battery pack, - Free on-site delivery, - New wear parts and squeegees, - Service and overhaul, - Training and instruction, - Cleaning agents, - Brushes and accessories tailored to your floor. Other specifications: - Type: Sweeper-scrubber, - Condition: Used/Pre-owned, - Brand: Tennant, - Model: M30, - Operator position: Ride-on, - Theoretical capacity: 15,860 m²/h, - Side brush diameter: 53 cm, - Scrubbing width: 157 cm, - Squeegee width: 150 cm, - Number of brushes (scrub): 2, - Brush type: Cylindrical, - Scrub brush diameter: 30.5 x 122 cm, - Brush pressure (scrub): 193 kg, - Debris hopper capacity: 198 liters, Godenyiv Nopfx Agysbi - Solution tank capacity: 284 liters, - Recovery tank capacity: 360 liters, - Power source: 36V battery, - Hopper dump system: High-dump, - Maximum dump height: 152 cm, - Filter area: 7.3 m², - Filter type: Panel filter, - Maximum speed: 13 km/h, - Maximum climb angle: 10%, - Drive: Rear-wheel drive, - Filter shaker: Electric, - Weight (excl. batteries): 1,815 kg, - Weight (incl. batteries): 2,449 kg, - Dimensions (LxWxH): 274 x 162 x 147 cm, - Availability: In stock, - Operating hours: 2,572 hrs, You can also rely on Metech for all maintenance and reordering of cleaning supplies for this machine. Besides this used Tennant M30, we also have new and pre-owned sweeper-scrubbers available. Check out our sweeper-scrubbers for more information. Would you like more information about this Tennant M30? Please contact us — we are happy to provide further details.

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Gbodoifnzdopfx Agyji Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Leto izdelave: 2000, stanje: kot nova (razstavni stroj), številka stroja/vozila: 13:000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG) Dear Sir or Madam, We are pleased to offer a 13,000-litre double-walled storage tank for diesel storage as follows: - Nominal capacity: 13 cbm - Quantity: 1 - Used, but fully overhauled – i.e. the tank has been cleaned, fully refurbished, primed, and painted - Colour finish: lacquered according to RAL colour chart; custom colours available upon request - Material: steel-in-steel, material grade S235JRG2 - Documentation: Manufacturer’s certificate/test certificate in accordance with DIN 6616 D/2 and nameplate - 1 dipstick - 1 vent connection - 1 fill connection - 1 new overfill prevention device - 1 new leak detection unit with filled leak detection fluid - 1 ladder - 1 suction line - Design: cylindrical storage tank with feet/bracket Tank dimensions: - Length: approx. 6,800 mm + diesel pump 500 mm - Diameter: approx. 1,600 mm - Weight: approx. 2,800 kg Aboveground storage Compact diesel dispensing system AF 3000 (new), hose length 4 m (longer on request) Approved automatic fuel nozzle. Pump: 230 V, max. 65 L/min or 230 V, max. 90 L/min ===== Top offer: Liquid fertilizer – AHL tank systems available from 10,000 to 100,000 litres. Naturally, you can help design your own tank system! All our systems are thoroughly checked and inspected by selected, experienced staff within our company. Affordable delivery can be arranged on request. Inspection of our systems is possible at any time. Further tank systems for aboveground and underground storage in all sizes are available and can be viewed and purchased on our premises. Have we convinced you with our offer? If you have any questions or requirements, simply give us a call. One of our experienced staff members will be pleased to advise you. Price/Shipping The price for the tank station is ex-works Warstein, loaded free of charge onto your vehicle. Delivery is available at an additional, cost-effective rate. Delivery time: immediate You will receive an invoice with VAT shown separately. In addition, we buy existing tank systems and, as a certified specialist according to the Water Resources Act (WHG), we can professionally empty, clean, dismantle, and transport them away. Gbodocl Sb Rjpfx Agysi Best regards from Warstein Tank & Environmental Protection Wozniack

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Gbjdpjidqphjfx Agyoi Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: skoraj kot novo (rabljeno), 2,700 m² Schäfer R3000 Mezzanine, 2-tier Used item, excellent condition, as new – see photos Manufacturer: SCHÄFER R3000 CAD planning and installation available Price on request! Partial purchase possible Negotiable price: on request! Stock item, immediately available Transport and assembly available on request. Inspection possible anytime by appointment. Further information on request. Constant stock of over 5,000 running meters of pallet racking from various manufacturers. (Subject to changes and errors in technical specifications, data, and prices, as well as prior sale! Refer to our Terms and Conditions. All prices excl. VAT, ex-stock.) Buying / Selling: We are constantly looking for or offering numerous items from various sectors: - Swept-clean company clearances - Liquidations - Fast, flexible, and efficient! We also clear out and/or dispose for insolvency administrators. Just send us a brief message and we will respond promptly. Gbjdpfxofiqhfo Agyoi To visit our website, please click our logo!

Stanje: generalkompletno obnovljen (rabljeno), Single-sided edge processing and edge banding machine (left-hand side) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 1 ALU Panel thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed rate (adjustable) m/min: 6 - 30 EDGE PROCESSING: Jointing unit with CNC control 08.376 (2 x 4.5 kW) Spraying unit (for liquid release agent) EDGE BANDING SECTION: Lamps for panel edge heating Gluing unit (PUR glue + pre-melter) 04.1569 Edge pressure zone mm: 1000 + edge magazine for roll material (compartment N° 6) End trimming unit 08.42 (2 x 0.66 kW) Working speed: 25 m/min (0-25°) Pre-milling unit 08.0555 (2 x 1 kW) Gbsdpfx Agjcr T N Djyji Milling unit 08.055 (2 x 1 kW) 0°-30° + spraying unit (for sliding agent) Contour milling unit (for fine trimming) CNC controlled 08.348 (2 x 0.66 kW) Multi-profile scrapers (CNC controlled) 08.516 Flat scraper unit 08.517 (pneumatic) + spraying unit (for polishing fluid) Buffing unit 08.614 (2 x 0.25 kW) Universal milling unit for grooving, rebating, and profiling 08.183 (1 x 3 kW) Smoothing unit 08.53 Radius sanding unit for straight edges WI (4 x 0.75 kW)

Stanje: novo, Hydraulic Winch HAW4000 with Electric Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Horticulture, Building Construction, Civil Engineering, and many other applications. With the HAW4000 hydraulic attachment winch, you can significantly ease a wide variety of tasks. Maximum rope capacity at 4000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration includes 50 m of 10 mm wire rope. ⦁ Suitable for viticulture, agriculture, forestry, and horticulture ⦁ For building construction, civil engineering, and road construction ⦁ For pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Robust steel construction featuring mounting options on three sides (left, right, rear) with M16 threaded holes. This allows for a wide range of installation configurations. (Threads are machined and painted; for corrosion protection, threads must be re-cut before use.) Large, greaseable cable pulley ensures long service life for the wire rope. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow: up to 200 l/min, temporarily max. 240 l/min ⦁ Maximum pulling force: 4000 kg ⦁ Rope speed: 140 m/min at 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Colour: Red The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on your required pulling speed and force, we can offer you different options. Please contact us for expert advice. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm Gbedjfn Tvkspfx Agysi ⦁ Width (front): 200 mm ⦁ Width (rear): 300 mm ⦁ Bearing width: + 50 mm ⦁ Motor width: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Stanje: novo, Leto izdelave: 2025, Vstopna modelna vlaknovna laserska stroj za rezanje pločevine in cevi Stroj z dvojnim namenom. Serija AT omogoča rezanje kovinskih pločevin in cevi. Modularna konstrukcija mize za rezanje s togostniki prihrani čas pri razstavljanju ter izboljša udobje in togost stroja. Prijemanje obdelovanca na stroju je zelo enostavno, hitro in priročno – čas vpenjanja lahko znaša samo 3 sekunde ob visoki ponovljivosti. Izjemno hitra zračna (brezplinska) obdelava poveča učinkovitost rezanja ogljikovega jekla za 37 %. Vlaknovne laserske glave zaznajo izbokline na materialu, s čimer učinkovito zmanjšajo stopnjo poškodb ter znižajo stroške vzdrževanja laserskega rezalnika. Rezanje kotnikov in profilov U standardno brez dodatnih namestitev. Gbodpshv U Uvofx Agysi Stanje: Novo Vrsta laserja: Vlaknovni laser Moč laserja: 1000W, 1500W, 2000W, 3000W Območje rezanja: 3048*1524 mm Hitrost rezanja: 0-100 m/min Natančnost pozicioniranja: ±0,03 mm Natančnost ponovnega pozicioniranja: ±0,02 mm Podprti grafični formati: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC upravljanje: Da Način hlajenja: VODNO HLADENJE

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: AB2024, skylaser Marking Laser – CO2 Laser Engraving Machine / Marking Laser is the all-in-one solution for your complex laser engraving, laser inscription, and laser marking applications. Attention: Compare the installed components in the laser systems being offered: Scanlab® scanners, IPG Photonics® lasers, Parker® axes, Schneider Electric® motors, Scanlab® controllers, German software, cables—all components are sourced exclusively from German manufacturers! The laser systems are 100% assembled to customer specifications at our facility in Plauen. Gbjdpfx Ae Sd Trsgyei Competitors often use Chinese components (the controller is just the start—EZCAD, for example, has Chinese origins!). (* Price varies depending on configuration; this is a brand new laser machine manufactured by us) Our skyLaser Mark systems are used precisely where conventional CO2 laser technology reaches its limits. The customisable and mobile worktable increases the system's flexibility. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skylaser MARK systems deliver precise and permanent markings (laser inscriptions/engraving) and are suitable for specialised laser applications on metals and organic materials. A wide variety of fonts, barcodes, serial numbers, logos, and images can be applied effortlessly. Thanks to the excellent resolution, almost any marking requirement can be met. The software is extremely user-friendly. Even very complex and elaborate marking operations can be easily created on the supplied industrial PC. Exact positioning is achieved in no time, thanks to the integrated positioning laser. As the system contains virtually no wear parts and, thanks to the fiber laser technology from IPG Photonics / IPG Laser GmbH, is almost maintenance-free, it is ideally suited to industrial applications and continuous operation. - Processing area: 110x110 mm, or 175x175 mm (other sizes on request, depending on F-theta lens) Optional - Laser source: IPG laser, alternative options available depending on application - Laser output: 20W / Optional 30W / 50W - Software-controlled precision axis worktable (X, Y, Z axes) - Z-axis travel: max. 200 mm - Marking speed: up to 8,000 mm/s - Redundant safety system - System: Laser class 1 - Scanlab SCANcube for perfect results - PFEIFER Technology industrial PC, including pre-installed control software - Positioning laser: integrated diode laser for optimal positioning - Optional: camera-based positioning, 3D processing, database integration - Virtually maintenance-free

Stanje: rabljeno, The listing is currently being processed. Additional details and specifications about the machine will follow shortly. Gedpjrrvg Usfx Agyobi Transport can be arranged if required. Subject to prior sale and modifications. Welcome to Oussman-Machinery. If you have any questions or requests, feel free to call us – we are happy to assist you. We speak English, German, Arabic & French.