VacuMaster RE 100-4 s krovno tirnico

Schmalz Schmalz VacuMaster RE 100-4

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Nksdpfxsu R Szao Abbot For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° Nkodpfxoxnvq Ej Abbot • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test © Alarm function test © Various control components • Price on request

Leto izdelave: 2024, Stanje: novo, Systém návratnosti RTS Compact je samostatný systém, který lze napojit na jakýkoliv olepovačku hran (KAM), nezávisle na výrobci. Průchozí rychlost je plynule přizpůsobitelná rychlosti KAM. RTS Compact je dodáván kompletně s rozvaděčem a je po instalaci okamžitě připraven k provozu. Volitelně: „Rozšíření dopravní techniky RTS Compact“ pro jednoduché otáčení dílů při příčném olepování hran. Volitelně dostupný: „Ergonomický balíček RTS Compact“. Na konci zpětného dopravníku je použit zdvihací stůl a vzduchový polštářový stůl. Tato volba umožňuje ergonomickou práci. - Připojení ke všem olepovačkám hran všech výrobců - Ovládání KAM jednou osobou možné - Maximální ergonomie - Úspora personálních nákladů - Šetrná přeprava materiálu - Montáž cca 0,5 dne - Zařízení na otáčení drobných dílů - S dopravním pásem L 4500 B 800 Jednostopá válečková kolej Řídicí systém RTS Compact – volitelně ovládací skříň Dostupnost: krátkodobě Nksdpow Nadmjfx Abbet Sklad: Flörsheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Brand KDF110 Optimat Ambition – only 1,150 operating hours Make: Brandt Model: KDF 110 Year of manufacture: 2012 Serial No.: 0-261-20-6960 Control: Easy Control 10+ non-contact distance control, feed-regulated with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / workpiece guide: Central control, 2 roller tracks Jointing unit: 2 x 0.75 kW 200 Hz, including joint cutter set in DIA version, manual positioning via Siko counting dial, max. 3 mm stock removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing unit for hotmelt adhesive and PU application option, magazine, pressure zone with electro-pneumatic 2-point positioning via central control Pressure zone: 1st roller powered, 2 free-running rollers for excellent and consistent compaction End trimming unit: 0.18 kW, 12,000 rpm Milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotation, 3-position setting for chamfer/radius (R2), overhang and straight edges. Max. 3 mm edge thickness with Siko counting dial Profile scraper: max. 3 mm edge thickness Surface scraper: Reversible knife Chain width: 80 mm Edge material (roll): 0.4 – 3 mm End trimmer device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: for workpiece thickness 8–22 mm: 70 mm; for 23–40 mm: 120 mm (dependent on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed rate: 8 m/min Nkedpoxvirfefx Abbjt Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2459, Stroj v zelo dobrem stanju - zelo pregleden upravljalni del - minimalna širina obdelovanca cca 80 mm - minimalna dolžina obdelovanca cca 200 mm - podajna hitrost cca 10 m/min - transportna veriga s trdno privitimi specialnimi verižnimi ploščami - dvojni zgornji pritisni valj - dolžina stroja 4300 mm - širina stroja 1400 mm - teža cca 1250 kg - izvlečni nosilec obdelovanca na sprednji strani - avtom. centralno mazanje za kapno žago & kotno rezkanje - posoda za talilno lepilo s teflonsko prevleko (zelo malo vzdrževanja) - pripravljenost za obratovanje cca 5 - 6 minut - Poravnalna enota Nksdpsx Ahmuefx Abbst - pnevmatsko valjčno kapiranje - neposredno nanašanje lepila na obdelovanec - kapirna enota za sprednjo in zadnjo stran - poravnalna/posnemalna/radialna rezkalna enota - zaobljanje robov - ravnalna strgala s dvojno kontrolo

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Einseitige Kantenanleimmaschine zum Verleimen von Kantenband mit Schmelzkleber an allen 4 Seiten eines rechteckigen Paneels, einschließlich Nachbearbeitung des Kantenbands. Nksdpjxpgxvefx Abbst

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, največja debelina roba: 3 mm, delovna višina: 900 mm, potrebna višina: 1.400 mm, zahteva za prostor dolžina: 4.050 mm, potrebna širina: 1.300 mm, obratovalni tlak: 7 letvica, with PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change system, including glue discharge device, high-frequency cross-cut saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and insertable cutter (combined version), corner rounding unit, surface scraper (incl. pneumatic lift), robust chain feed, double pressure rollers with ball bearings, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change corner milling unit, radius scraper (incl. pneumatic lift), running gear F 4 – Technical Profile Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Nedpfx Abjx E N Nfsbokt Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, Žerjavna naprava z električnim krovnim vozičkom, verižno dvigalko ter kompletno vakuumsko napravo Žerjavne tirnice GISKB II, dolžina 9 metrov Most žerjava HEA120, dolžina 4400 mm Električni žerjavni voziček GIS Verižni dvigalo GIS GP500/1, 0,5 t, višina kljuke ca. 5 m Vakuumska naprava DEVO-Tech, D-TB-300.03, nosilnost 300 kg Demontirano Nodpsxp Nycjfx Abbokt

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Vakuumski cevni dvigalo JumboErgo 85 s žeravno tirnico za stropno pritrditev. Vakuumski dvigalo in pihalnik sta bila malo uporabljena, v zelo dobrem stanju, glej fotografije. Veljavnost DGUV je potekla. Nksdex E Drbspfx Abbot Žeravna tirnica cca 16 x 6 m z 10 navpičnimi stropnimi obešali in 2 čelnima obešali, glej fotografijo. Prosta višina žeravne tirnice približno 3 m, višina stropa približno 3,5 m, naprava je višinsko prilagodljiva. Razstavljanje in prevzem v 41334 Nettetal