Široki tračni brusilnik + krtača

Schleiftechnik S2 RTN/V 1100

Stanje: dober (rabljeno), Leto izdelave: 2008, Skupna masa: 3.500 kg Masa prikolice: 866 kg Hsdpfehqd Siex Ab Ejfd tip prikolice: triosna Prikolica je skoraj nerabljena. Uporabljena je bila le nekajkrat za manjše dostave.

Stanje: novo, Typ SK-1000-P6 Arbeitsbreite: 1000 mm Minimale Werkstücklänge: 500 mm Arbeitshöhe: 2–150 mm Polierwalzengeschwindigkeit: Frequenzgesteuert Vorschubgeschwindigkeit: 3–12,5 m/min Gesamtmotorleistung: 13,87 kW Scheibenmotor: 1,5 kW × 1 Querantriebsmotor: 1,5 kW × 1 Hododmi Niepfx Ab Ejfd Schraubwalzenmotor: 2,2 kW × 2 Vorschubantrieb: 2,2 kW Heben-/Senkmotor: 0,37 kW × 4 Schwenkmotor: 0,37 kW × 2 Tischhöhenverstellung: 0,55 kW Transportabmessungen: 3650 × 1850 × 2100 mm Gewicht: 4200 kg

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Hfedet Hw Shspfx Ab Esd Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Tip DC-9052 Zračni pretok: 4.560 m³/h Premer vhodov: 4 x 100 mm / 1 x 180 mm Premer ventilatorja: 356 mm Kapaciteta vreče: 307 l Vreča za zbiranje: ø 480 × 4 3-fazni, 400 V / 50 Hz Moč motorja: 5,6 kW Dimenzije: 2.764 x 585 x 2.355 mm Hsdpsfiiwxofx Ab Esfd Transportne dimenzije: 1.600 x 720 x 840 mm Teža: 125 kg

Stanje: novo, Typ MB506C Arbeitsbreite 600 mm Gesamtlänge 2500 mm Hfjdsd Srkbspfx Ab Ejd Abmessungen des Anschlags 880x110 mm Anschlagverstellung 45° Anzahl der Messer 3 Spindeldrehzahl Motorleistung 4 kW

Stanje: rabljeno, Leto izdelave: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: Hfedpfx Abew R Hh Ue Ejd - Including combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the outfeed side of the machine - Working width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Variable feed speed, infinitely adjustable from 2.5 to 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display unit for the electromotor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction nozzles: 2 x 200 mm - Feed belt is generally OK, but has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in uninspected condition! Availability: short notice Location: Röllbach

Stanje: rabljeno, Leto izdelave: 1986, največja delovna širina: 1300 mm Število trakov: 3-trak Hjdsvvki Nepfx Ab Esfd 1. agregat: čeveljni agregat Premer 1. valja: 100 mm Izvedba 1. agregata: jekleni valj/čevelj 2. agregat: valj/čevelj Premer 2. valja: 100 mm Izvedba 2. agregata: jekleni valj 3. agregat: valj/čevelj Premer 3. valja: 100 mm Izvedba 3. valja: utorni jekleni valj Brušenje s čevljem pri 3. agregatu: elektronski posamezni segmenti Čistilne krtače: da Možno brušenje laka: da Pihanje traku: da Vakuumska preproga: da Lokacija zaloge: Nattheim