Balansirni stroj Schenck TBcomfort, leto izdelave: 2016

Schenck TBcomfort

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 5 kg, skupna širina: 360 mm, skupna dolžina: 700 mm, Universal dynamic balancer for rotors from 10g to 5kg Hedpjuh Svpefx Altsr

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Multispindle lathe Schütte AG20 Hsdpfxohrihyo Alter

Stanje: rabljeno, Leto izdelave: 2004, Premer brušenja 250 mm Hjdsywntyspfx Alter Dolžina brušenja 650 mm Višina konic 125 mm Stroj se prodaja s servisom in novo geometrijo Delovnih ur do sedaj 12.260 Konjiček z fino nastavitvijo Brušilni vretenjak z možnostjo nagiba, 5° Hirt zobniški prenos Filter s papirnatim trakom Merilna naprava Marposs Naprava za notranje brušenje

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 055 - 030.0221, Complete overhaul Year 2003 – Fanuc 16i-T Centre height 175 mm, distance between centres 650 mm 2 external grinding wheels + fine B-axis Country of manufacture: Switzerland (CH) Voltage: 3x400V Dimensions: 3680 x 2165 x 2100 mm Net machine weight: 5,500 kg TECHNICAL SPECIFICATIONS Centre height: 175 mm Distance between centres: 650 mm LONGITUDINAL SLIDE (Z AXIS) Max travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm CROSS SLIDE (X AXIS) Max travel: 254 mm / SPW 650 Hsdezbaz Ajpfx Alter Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Max. workpiece weight between centres: 80 kg TAILSTOCK Taper: Morse 3 Quill: Ø 50 mm Quill stroke: 35 mm UNIVERSAL WHEELHEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Wheelhead drive power: 12.5 kW Rotational speed: 3,200 min⁻¹ Programmable cutting speed up to: 50 m/s B axis travel: -15° to +195° B axis indexing accuracy: 0.0001° LEFT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° RIGHT WORKHEAD Taper: MT3 Power: 4 kW Rotational speed: 1–1,000 min⁻¹ C-axis indexing accuracy: 0.001° Hydraulic advance with pressure control All technical details are given without guarantee, subject to errors and omissions. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (inspected and/or replaced) Wheelhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced + adjustment. Newly painted. Workhead Disassembled, cleaned parts, worn and defective parts replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock Disassembled, overhauled and inspected. Hydraulics Disassembled, motor inspected, hoses, defective and worn parts replaced. Hydraulic block checked. X-axis Disassembled, worn parts such as O-rings, seals, segments etc. replaced, hydraulic piston overhauled, tables ground. Z-axis Disassembled, tables ground, worn and defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet Fully inspected, various relays replaced. Paint Colours: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill Hjdpfxsfbt Sis Altjr • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. Hedpfjvwgl Njx Altsr MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 7.474 h, potovalna razdalja osi X: 508 mm, pomik osi Y: 406 mm, pomik po osi Z: 356 mm, proizvajalec krmilnikov: HAAS, obremenitev mize: 227 kg, največja hitrost vretena: 10.000 obr/min, število osi: 3, Táto 3-osá frézka HAAS Mini Mill 2 bola vyrobená v roku 2012. Disponuje pojazdom osi X 508 mm, pojazdom osi Y 406 mm a pojazdom osi Z 356 mm. Stroj má veľkosť stola 1 016 × 356 mm a maximálne zaťaženie stola je 227 kg. Ak hľadáte kvalitné možnosti obrábania, mali by ste zvážiť vertikálne obrábacie centrum HAAS Mini Mill 2, ktoré ponúkame na predaj. Pre viac informácií nás kontaktujte. • Stôl: • Rozmer: 1 016 × 356 mm • T-drážky: 3 × 16 mm • Rozteč T-drážok: cca 110 mm • Posuvové rýchlosti: • Max. rýchlosť posuvu pri obrábaní: 12,7 m/min • Rýchloposuv: 15,2 m/min • Elektrické údaje: Hedszbh U Dspfx Altor • Napájanie: 360-480 V / 3 F / 50-60 Hz Technická špecifikácia Typ kužeľa BT 40

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Tank capacity: 775 l, maximum batch weight: 100 kg, heating power: 26 kW, maximum temperature: 75°C, basket dimensions (X/Y/Z): 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions (X/Y/Z): approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Includes basket rotation with swing drive, automatic water filling, and oil separation with coalescence separator unit and oil collection container. Documentation available. On-site inspection possible. Hodpfxewr Dxho Altsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4304, premer vrtljive mize: 600 mm, višina brušenja: 450 mm, skupna masa: 14.500 kg, Machine is equipped with 3 spindles: face grinding, external grinding, and internal (bore) grinding. Hsdpfxovt A Rte Altor Turret head on B-axis with 1° indexing. Band filter unit included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, DISKUS DDS 750 XR – Technische Daten Maschinentyp: Vertikale Doppelscheiben-Schleifmaschine Modell: DDS 750 XR Schleifscheibendurchmesser: 750 mm Hjdpewwrqcsfx Altsr Maximale Schleifbreite (Durchlaufschleifen): 180 mm Maximale Materialstärke (Durchlaufschleifen): 30 mm Maximale Schleifbreite (Einstechschleifen): 300 mm Maximale Materialstärke (Einstechschleifen): 80 mm Schleifspindel 1 Leistung: 48 kW Schleifspindel 2 Leistung: 48 kW Maximale Umfangsgeschwindigkeit der Schleifscheibe: 63 m/s Kühlschmittelführung: Durch die Spindelmitte Werkstückzuführung: Drehteller Zuführgeschwindigkeit: 20 mm/min bis 240 mm/min Steuerung: Siemens 840 D CNC Gesamthöhe der Maschine: ca. 3.100 mm Gesamtgewicht: ca. 13.000 kg Stellfläche: Länge ca. 4.900 mm, Breite ca. 5.000 mm Konstruktionsmerkmale: Dreieckig-stabile Rahmenbauweise, Linearspindeln, 16 CNC-Achsen, Zentralschmierung, Kühlmittel-Filtration