Škarje za giljotino

Schechtl Tafelschere MSB 200

Stanje: novo, Leto izdelave: 2025, CIDAN Machinery manufactures slitting and cut-to-length lines that can be programmed and operated by both skilled and unskilled users. Our cut-to-length lines are all-in-one systems designed to withstand high production volumes over time while occupying minimal floor space. CIDAN Machinery offers many of its state-of-the-art features as standard – straightening units, sheet guides for precise feeding, guillotine shears with hold-down devices and double-edged blades, feed units, foot pedals for remote operation, and much more. To provide the absolute best technological solutions for coil processing worldwide, Forstner – the globally leading brand for slitting and cut-to-length lines since 1960 – is now also part of the CIDAN Machinery Group. Laodpfx Asmfrgrsaysi - Processing sheet metal from coil saves money, reduces scrap, and frees up warehouse space. - We have the right solution for any production scale! - Coil processing lets you streamline operations, boost productivity, and increase your profits! - The extensive Forstner portfolio can be flexibly combined into a highly efficient production line tailored to your requirements. Key parameters such as system performance, material removal, and time required to access material are crucial for fast and cost-effective production. - With our solutions, you can easily process coils from 500 kg up to 8 tons. Larger coils mean fewer changeovers, less waste, and a more efficient processing workflow. - Need quick and flexible access to a wide range of materials without time-consuming changeovers? With a multi-mandrel decoiler you have up to eight different materials available at any time, and changing from one coil to another is considerably faster. - With one of our fully-featured slitting and cut-to-length lines, there is no longer any need to cut sheet strips separately with a guillotine shear. - Whether you sell cut-to-size sheets or rewind from large to smaller coils – we have the right solution for you! - Efficient coil handling shortens lead times, increases production floor space, and reduces capital tied up in inventory.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) Lasdpfx Aajmhhf Ssyji - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: rabljeno, Leto izdelave: 2003, Punching force 16 t Sheet thickness 8 mm Max. sheet length 1250 mm Max. sheet width 1000 mm Motor power 13 kW Control system Cadman CNC Voltage 400 V Lsdpod Ih Spefx Aayeai Machine weight approx. 8.3 t Space requirement approx. 3600 x 2300 x 2000 mm

Stanje: novo, Leto izdelave: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears utilize the precision of CNC technology. This range is designed for industrial use, ensuring every product stands out with exceptional durability and resilience—regardless of operating conditions. The specifications comply with strict technical standards and rigorous CE regulations, guaranteeing fulfillment of EU requirements as clear proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, powerful, heavy-duty, and extremely robust segmented bending brake—this is no ordinary folding machine, but a much stronger and sturdier construction. A segmented bending brake is characterized by full segmentation across the entire working length of 1.40 meters. Both upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle ranges from 0 to 155 degrees. Clamping is done via foot pedal so your hands are free to position the sheet—open and close using the foot. Lajdpsc Swhyefx Aaysi The bending beam is equipped with two gas pressure springs, making operation exceptionally easy. A practical segmental toolbox is located at the rear of the machine. Technical data: - Maximum working width: 1400 mm - Maximum bending angle: 160 degrees - Maximum sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams are fitted with segment jaws (full segmentation) - Adjustable stop for preset bending angles - Degree scale Price: €5,700 Swivel castors included Delivery: Weekly Payment: Cash on delivery Delivery cost: €180 We look forward to hearing from you!

Stanje: rabljeno, Leto izdelave: 2004, vrsta goriva: plin, Lifting capacity in kg: 2,500 kg Lift height: 3,050 mm Lodpfxor Dg H Es Aayjai Fork length: 1,200 mm Load center: 500 mm Turning radius: 2,444 mm Travel speed: 22 km/h Front track width: 1,008 mm Rear track width: 932 mm Machine weight approx.: 3.64 t Space requirement approx.: 3.8 x 1.25 x 2.25 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, RAS Multibend Center 79.22 Samodejni CNC upogibni center / upogibni stroj za plošče Leto izdelave: 2002 Tehnične specifikacije • Delovna dolžina: 2160 mm / 7,09 ft • Največja debelina pločevine: jeklo (400 N/mm²) – 2,0 mm • Največja debelina pločevine: nerjavno jeklo – 1,5 mm • Največja debelina pločevine: aluminij – 3,0 mm Ljdperxt Axefx Aayjai • Največja širina razvite pločevine: 1500 mm / 4,92 ft • Največja višina štiristranskega roba: 203 mm • Doseg upogibnega orodja: 180 ° • Širina stroja: cca 5500 mm / 18,04 ft • Dolžina stroja: cca 7000 mm / 22,97 ft • Višina stroja: 2500 mm / 8,20 ft Moč: 18 kW Frekvenca: 50 Hz Tlak: 6 bar Teža: cca 21.000 kg / 46.297 lbs

Stanje: novo, Leto izdelave: 2025, Stroj za profiliranje kapnih obrob za okna PO-1 omogoča izdelavo profila „okenske obrobe“ z valjanjem pločevine skozi oblikovalne valje. Okenska obroba je element, ki se pogosto uporablja v gradbeništvu pri vgradnji oken. Pri standardnem načinu se okenska obroba postopoma upogiba z uporabo ročnega upogibnega stroja. To je cenejši, vendar bolj dolgotrajen postopek. Pločevina mora biti predhodno označena za vsak upogib. Vsak upogib se nato izvede z ročnim upogibnim strojem. Operater mora nastaviti potrebne dimenzije glede na oznake, pritrditi pločevino z vpenjalnim mehanizmom stroja in jo potem upogniti. Dolžina okenske obrobe je omejena z največjo delovno dolžino upogibnega stroja. Zato je vsak ročni upogib zamuden in proizvodni proces postane drag ter neučinkovit. Lsdpfxslwt Ado Aaysai Z namenom izboljšave proizvodnega procesa ponujamo stroj za profiliranje kapnih obrob za okna PO-1. Ta stroj valja profil okenske obrobe na obeh straneh istočasno v eni sami operaciji. Hitrost valjanja je 10 m/min. Stroj je opremljen s 7 pari oblikovalnih valjev. Minimalna širina okenske obrobe je 120 mm pri hkratnem valjanju na obeh straneh, maksimalna širina pa 610 mm. Za spremembo širine okenske obrobe preprosto uporabite nastavitveni ročaj, ki omogoča enostavno prilagajanje stroja za prehod z ene širine na drugo. Tako postopek nastavitve ni zamuden. Na stroju je prav tako možno valjati okensko kapno obrobo v dveh korakih.

Stanje: rabljeno, Technical details: Plate length: 2000 mm Plate width: 1500 mm Plate height: 820 mm Plate thickness: 185 mm Machine weight approx.: approx. 2.1 / 2.2 t per plate Transport dimensions LxWxH: approx. 2.0 x 1.5 m / per plate A total of 6 of these clamping plates are available for sale. (Price per piece) Material: cast steel/profile cast T-slots according to DIN 650: a = 43 mm; h = 105 mm; b = 76 mm; c = 50 mm; center distance 375 mm Laedpfx Aaju N D Rdsyji 4x through holes Ø 90 mm 10x mounting holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for plate no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for plate no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Lasdpsmhh Dhofx Aayoi Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: rabljeno, Leto izdelave: 1978, številka stroja/vozila: 4788, Skupna pritiskalna sila: 35 t Izvlaka: 225 mm Hod bata: 8 - 80 mm Nastavitev bata: 50 mm Montažna višina (hod spodaj, nastavitev zgoraj): 325 mm Pritrdilna površina mize pribl.: 600 x 450 mm Pritrdilna površina bata pribl.: 300 x 225 mm Lodpsw Tukisfx Aayoai Število hodov na minuto: 160 min-1 Potreba po moči: 2,2 kW Dimenzije DxŠxV: 1000 x 1600 x 2200 mm Teža stroja pribl.: 1,9 t