Center stružnica

Schaerer UDA 560

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Nwedpfx Adot Iklkoyeb Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Njdpfx Adeu Ixznoyswb Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes

Stanje: dober (rabljeno), premer struženja nad prečnim suportom: 380 mm, izvrtina vretena: 70 mm, premer struženja: 640 mm, premer struženja nad ležiščem sani: 900 mm, Features: Distance between centers: 2,000 mm Swing over bed: 640 mm Swing over carriage: 380 mm Swing over gap: 900 mm Spindle bore: 70 mm Includes: Nsdpfoudh Slox Adyswb 400 mm 3-jaw chuck 390 mm 4-jaw independent chuck Steady rest (open) and follow rest (closed) Quick-change tool post with 4 holders.

Stanje: rabljeno, Technical details: Swing diameter over bed: 560 mm Swing diameter over cross slide: 300 mm Turning length: 2000 mm Centre height: 250 mm Cross slide travel (Z-axis, transverse): 300 mm Longitudinal slide travel (X-axis, longitudinal): 2000 mm Spindle bore: Ø 65 mm Swing diameter in gap: 700 mm Length of gap: 300 mm Spindle speed range: 16...1250 / 23 steps rpm Feed range X-direction: 0.028...5 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 260 mm Total power requirement: 11.0 kW Machine weight approx.: 3.5 t Machine dimensions approx. LxWxH: 3.8 x 1.3 x 1.4 m Nwjdpfxju Ix Emj Adysb Other features: - 3-jaw chuck Ø 315 mm - Equipped with cross slide and top slide (top slide with 4-way toolpost) - Coolant system - Live centre MT5 in tailstock - Chuck guard - Scale for taper turning - Manual traverse control Accessories: 1x closed steady rest Ø 200 mm

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Nwedpfsu Ix Dcsx Adysb Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: dober (rabljeno), Leto izdelave: 1988, Accessories: Yes Punching force: 800 kN Frequency: 50 Hz Current: 17/11 A Voltage: 220/380 V Round steel: 32-17 mm Square steel: 30-18 mm Nwodpfx Adoryaqysyeb Angle steel: 100 x 10 mm Flat steel: 350 x 16 mm Throat depth: 200 mm Working height: 1107 mm Total power requirement: 4 kW Machine weight: approx. 1.5 t Space requirement: approx. 1200 x 700 x 1850 mm

Stanje: nepreverjeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 65 mm, premer struženja: 500 mm, moč: 10 kW (13,60 KM), Manufacturer: Werkzeugfabrik Budapest Model: EU500/1500 Turning length: 1500 mm Swing diameter – over bed: 500 mm Nodpfx Adjqwlmqeyowb – over cross slide: 315 mm Cross slide rotation: 18 degrees Spindle speed range: 25–1250 rpm Main spindle bore: 65 mm Spindle through-hole: 63 mm Tailstock sleeve taper (metric): 72 Lathe center taper: Morse 5 Main motor power: 10 kW Mains voltage: 3-phase, 380V, 50Hz Machine length: 3400 mm Total machine width: 1210 mm Height: 1265 mm Machine weight: 3550 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, Škarjasta dvižna miza, škarjasta dvižna ploščad, enojna škarjasta dvižna miza, nizkoprofilna dvižna miza -Proizvajalec: Edmolift, škarjasta dvižna miza nizkega profila tip TUB 600 u agg -Nosilnost: 600 kg Nwsdjphup Aepfx Adyeb -Platforma: pribl. 1450 x 900 mm -Mera spuščena: višina 85 mm -Mera dvignjena: višina 800 mm -Čas dviga: pribl. 13 sek. -Količina: 1x dvižna miza na voljo -Cena: na kos -Transportne dimenzije: 1480/930/H260 mm -Teža: 212 kg s paleto

Stanje: dober (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 443954701005, Offer 25086 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat bar: up to 400 x 120 mm - or: 300 x 22 mm - Profile Steel Shear - L- and T-iron at 90°: up to 150 x 12 mm - Square / round steel: 40 / 40 mm - Notching Device - With square notcher for sheet metal up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm Nwjdpov I Sxvofx Adyjb - Punching Unit - Punching force: approx. 100 t - Throat depth: 510 mm - Stroke: approx. 10 to 50 mm - Punching in steel up to Ø 31 mm in 25 mm material thickness - Electrical contact length stop - Various: 10 pcs. punch & die sets - Drive: 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight: approx. 2100 kg

Leto izdelave: 1990, Stanje: kot nova (razstavni stroj), Hydraulische Presse von Eckolt in neuwertigem Zustand. Nwodpfjd Siacex Adyeb Ausgestattet mit Plattenhalter. Technische Daten siehe PDF.