Stroj za zapiranje vročih zračnih vrečk

Saxon Heat Sealer Saxon 2

Stanje: dober (rabljeno), Dvostruko spiralno miješalo Potpuno od nehrđajućeg čelika Dimenzije komore za miješanje: 1500 mm duljina x 1100 mm širina x 700 mm dubina Kedpfx Abequ Uykebjwt

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: H3000-H5000TM,

Leto izdelave: 2022, obratovalne ure: 10 h, Stanje: novo, Universal Testing Machine H5TMC Mechanical Design: according to DIN EN ISO 7500-1 2 backlash-free recirculating ball screws, driven by AC servomotor, Fmax = 5 kN, stiffness 10 kN/mm 1 test chamber up to nominal load: Test chamber width: 420 mm (optional extensions: +190 mm / +330 mm / +620 mm) Maximum test stroke without test fixtures, adapters and KMZ: 1025 mm (optional extensions: +250 mm / +500 mm) Optional: conversion to floor-standing model requires additional base table assembly Travel Speeds: Testing speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force Measurement: Measuring range: within 0.4 – 100% of nominal load, class 1 (optionally class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) Force measurement resolution: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. Should the customer require a factory or DKD calibration at the installation site, this service will be charged separately. Traverse Travel Measurement: Incremental square-wave input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement: Kjdpfeiq Hw Ujx Abbswt

Stanje: rabljeno, Gainsborough Verwiegeanlage und All-Fill Pulverdosierer. Kwsdpfxovvppho Abbet

Leto izdelave: 2024, Stanje: novo, Universal Testing Machine H 5 TMNI (L) 250mm Extended Mechanical design: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free ball screw spindles, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm Kodpfxoiq Hxvo Abbjwt 1 test space up to nominal load: Working space width: 420 mm Max. test stroke without test tools, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1325 mm Travel Speeds: Test speed: 0.001 – 1200 mm/min up to nominal load Return speed: 1200 mm/min Force Measurement: Measuring range depending on the force sensor used: 0.4 – 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Force measurement resolution depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this effort will be charged separately. Crosshead Travel Measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Leto izdelave: 2024, obratovalne ure: 4 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Ksdpfx Abemdn Trsbowt Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, Kompletni sistem za pakiranje prahu za proizvodnjo in polnjenje vreč do 25 kg. Obrat je bil nabavljen v letih 2017/2018 in nikoli ni bil vgrajen. Sistem vključuje naslednjo opremo: Kwodpfx Abevlgq Iobjt 1 x Entecon rezervoar za shranjevanje prahu iz nerjavečega jekla, kapaciteta 1000L. 1 x Entecon AMC transportni puhalni sistem s krmilno omarico. 1 x All-Fill S10 dozirnik za prah z mešalom in izhodnim transporterjem (2017). 1 x Gainsborough Engineering Co. vertikalni avtomat za oblikovanje, polnjenje in zapiranje vreč tipa GV5 (2018), opremljen s termičnim tiskalnikom Markem Imaje Smart-Date X60. Tesnilne letevke – 620 mm (vodoravno) in 800 mm (navpično). 1 x Gainsborough Engineering Co. mobilni izhodni transporter. Vhod – 200 mm. Izhod – 1000 mm. 1 x OCS Checkweighers GmbH HC kontrolna tehtnica (2017) za tehtanje do 60 kg. Tip – HC. Dimenzije tehtalne mize – 1000 mm dolžine x 790 mm širine. Tloris celotnega sistema (vključno s prostorom za varno upravljanje): 9 m dolžine x 4 m širine x 6 m višine. Za več fotografij in tehnične specifikacije sistema nas kontaktirajte. Ogled možen po dogovoru.

Stanje: dober (rabljeno), Stainless steel powder mixer, conical mixer blending machine Mixing capacity: approx. 130 liters Motor power: 3 kW, 73 rpm (recently renewed) Fully mobile Manually operated butterfly valve (food-grade) Lid equipped with hatch safety interlock See our other listings VMA Wekerom Kedpfx Ajwyfu Tebbswt

Stanje: zelo dobro (rabljeno), Espec Type: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-cooled There is a small dent at the top edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber is technically faultless. The dent is purely cosmetic and has no impact on function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r. H. Temperature/Humidity deviations: ± 0.3°C / ± 2.5% r.H. Temperature/Humidity stability: ± 0.5°C / ± 3% r.H. Heating/Cooling rates and times Heating rate: 5.0 °C/min Cooling rate: 3.0 °C/min Test chamber internal dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Port feedthrough with silicone plug, 100 mm Equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel design, AC 400 V 3-phase, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, the following information: The following measures are performed on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) Kodpfx Aswz Er Usbbowt (Technical modifications and errors reserved! All data subject to change!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Type: VCS 7034-5 Climate Test Chamber, Water-cooled Manufacturer: Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature gradient: 1 to 4 K - Rate of change: * Cooling: 6.7 K/min Kjdpfxoxmhycj Abbjwt * Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration points: +23°C and +80°C Performance for Climatic Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test Chamber Dimensions (W x D x H): 580 mm x 765 mm x 750 mm External Dimensions (W x D x H): 870 mm x 1595 mm x 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important Information for Your Safety as a Buyer: The following procedures are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data. All information is non-binding!) For further questions, please feel free to contact us by phone.