Linija za prašno barvanje

SART HE

Leto izdelave: 2018, stanje: novo, Brand new freeze dryer. Pilot plant. Capacity: 1 kg product / 8 h. Effective area: 0.15 m² Raw material per 8 h: 1 kg. Final dry product per 8 h: 0.2 kg. Drying temperature range: 30°C-100°C. Material: Stainless steel 304. Fodpfx Aefn Iudebvsfw Maximum vacuum pump capacity: 13 m³/h Water removal capacity: 0.8 kg Final condensation temperature: -40°C Freeze dryer dimensions: 1.1 m × 0.7 m × 1.5 m

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Ffjdjw Iq Ugopfx Abvsw Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Komorna elektrostatika peč za prašno lakiranje: dolžina: 500 cm, širina: 250 cm, višina: 300 cm - Kabina za prašno lakiranje s filtrom: dolžina: 300 cm, širina: 220 cm, višina: 270 cm Ffsdpev Nvndofx Abvow - Elektrostatika oprema za prašno lakiranje: model: HMK MULTICOLOR, način uporabe: ročni

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Fodpfovc Hk Njx Abvjfw Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Colour: beige/green

Leto izdelave: 2001, stanje: generalkompletno obnovljen (rabljeno), Affordable MAZAK Laser Cutting System NTX48 1.5kW Year of manufacture: 2001 Very well-maintained, completely overhauled MAZAK laser machine with 1500W Sheet size: 2500mm x 1250mm Minimal installation footprint: 2.6m x 6m Small parts conveyor belt Fully enclosed machine cover Mild steel: up to 12mm Stainless steel: up to 6mm Plastic processing possible Incl. software Incl. warranty Incl. extraction system Incl. commissioning and training Fjdehturcspfx Abvjfw Machine can be tested under power! ===Optional: Fully automatic loading and unloading available===

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Fsdpfsd Ixadox Abvjfw The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: dober (rabljeno), Automatic drawer warehouses are the ideal system for vertical storage of bars and steel profiles with lengths of 3 m, 6 m, and 12 m, as well as heavy accessories, semi-finished products, components, molds, and long materials in general. The load capacity per storage unit ranges from a minimum of 5,000 kg to a maximum of 6,000 kg. Ffedpfxjvvlnto Abvow

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, featuring a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine is equipped with a numerically controlled, longitudinally moving drilling unit (X-axis), range 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. With its 19 kW drilling spindle drive, this machine is suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail and fixed table Total length: 15 m Mobile drilling unit for longitudinal positioning on workpieces Horizontal drilling head with one drilling spindle Additional tool storage in X-axis direction Clamping device for securing material Position detection device Max. profile size: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drilling spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Ffjdpfx Abjv Iamzovow For more information, please contact us.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right Fsdjd Iipxjpfx Abvofw - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Leto izdelave: 2025, stanje: novo, ⭐⭐⭐⭐⭐ (5.0) 58 Reviews ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Shipping available: 30-day delivery ✈️ ✅✅✅ Energy Class A+++ ✅✅✅ PLUS VAT & SHIPPING* ►►Buy Now◄◄ ✳️Maintain your liquidity! We offer a range of financing options to ensure your investment has the greatest chance for success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery times❗ ⌛⏰►►► ✨✨ Buy directly from the manufacturer and benefit from better prices and quality! ✨✨ Benefit from 40 years of Proton’s expertise in surface coating technologies. ➖➖➖➖➖ ☘️ Environmentally friendly ☘️⚡️ Green Energy ⚡️☘️ ⭐ Powder Curing Oven with Gas or Diesel Heating - BOXLINE 15-3025 Ffjdpfeghf R Uex Abvsw ✔️ Internal dimensions: 1500*3000*2100 mm ✔️ External dimensions: 1780*4000*2500 mm ✔️ Volume: 9 m³ ✔️ Heating capacity: 90,300 Kcal/h ✔️ Circulating air flow (fan): 6,800 [m³/h] ✔️ Circulating fan power: 2.2 [kW/h] ✔️ Digital temperature control, continuously adjustable up to 220°C ✔️ Sandwich panels: Interior 1 mm galvanized steel, Exterior 1 mm powder-coated steel ✔️ Adjustable air outlets and air duct channels for uniform air distribution ✔️ Adjustable curing temperature, curing time, and exhaust fan operation ✔️ Audible signal at the end of curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 140 mm mineral wool. Walls: 140 mm (50 mm rock wool + 100 mm glass fiber) ✔️ Heating method: Indirect heating ✳️Operating Principle✳️ This oven is designed for heating parts coated with powder paint. The coating polymerizes at approx. 200°C (depending on the type of powder used) and forms a film on the metal surface. Temperature control is performed by a control unit, which receives signals from a temperature sensor inside the oven. ✳️Oven Body✳️ The body of the polymerization oven consists of thermally insulated panels, vertically interlocked and sealed with heat-resistant compound. Conveyor gaps at the oven door channels can be provided as required. Optional double swing doors are available. ✳️Heat Exchanger✳️ The heat exchanger is installed on the side of the polymerization oven housing. Its internal design and materials allow the chamber temperature to be raised up to 230°C and maintain acceptable temperature differentials at various locations. Heat exchanger made from 3 mm thick AISI310 grade STAINLESS STEEL. ✳️Recirculation Fans✳️ Air circulation inside the oven is accomplished by four recirculation fans with insulated chassis. Wing-type air impellers are commonly used. ✳️Digital Fully Electronic Temperature Controller✳️ ✳️Exhaust Fan✳️ Used for extracting and discharging gases produced during powder polymerization in the oven. If required, the exhaust fan can run continuously after a certain period or be activated automatically at intervals. ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️