Komplet orodij

Sandvik

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Machine weight approx.: 8 t Required space approx.: 2.95 x 1.6 x 2.36 m Chuck diameter: 250 mm Swing diameter: 265 mm X-axis travel: 170 mm Z-axis travel: 200 mm Spindle speeds: 1,500 rpm Spindle bearing diameter: 100 mm Pick-up machine Tedpfx Abjizlh Hjgjf *

Stanje: rabljeno, Leto izdelave: 2007, Maximum gear cutting diameter: 2000 mm Workpiece diameter: 2700 mm Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Tjdpfsv E R Eisx Abgof Maximum table load: 20,000 kg Center distance: 70–1220 mm Stroke length: 30–330 mm Stroke rate: 10–200 strokes/min Total power requirement: 138 kW Machine weight: approx. 38 t Space required: approx. 11 x 5 m Machine: Fully CNC-controlled machine with electronic gear synchronization for C and D axis, equipped with digital INDRAMAT drive technology. Self-rigid machine bed of welded construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around design, Longitudinal guide with roller recirculating shoes. Precision-ground, preloaded ball screw with backlash-free preloaded nut. Digital AC drive technology featuring backlash-free transmission. Linear measuring system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded double worm gear, index wheel diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Through table bore diameter 500 mm, open at the bottom. Water-cooled digital AC servo motors. Machine must be installed on a foundation. Column: Machine column as high-rigidity cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide, and wrap-around roller recirculating shoes. Precision-ground ball screw with backlash-free preloaded nut. Digital AC drive technology. Rotary encoder for axial positioning. Gear shaping head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and cutter relieving, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight guiding and lateral guiding for relieving motion. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Stroke numbers from 10 – 200 strokes/min, stroke speed from 5 – 45 m/min. Shaping spindle speeds for working and return stroke can be programmed independently. Within the cutting area, the spindle speed remains constant. Cutter wheel speed max. 10 rpm, digital AC drive technology. Cutter relieving direction for internal and external gear cutting can be manually reversed. Lateral offset of the shaping spindle axis up to max. 50 mm off machine center, manually adjustable, to prevent cutter wheel collision during return stroke.

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Spindle speed range - main spindle: max. 4,000 rpm Drive power - main spindle: 35 / 45 kW Maximum torque: 770 Nm Spindle head: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tool stations: max. 4,000 rpm Tjdpfx Asvzhiwebgjf Drive power driven tool stations: 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec Y axis: 120 (+/- 60) mm X axis: 300 mm Z axis: 1,300 mm Y axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MT 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tooling - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Year of manufacture: 1999 # 1099 ----- Max. workpiece diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) Tsdpfx Abjt Hwu Aogof • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: rabljeno, Leto izdelave: 2008, Wheel diameter - max. 900 mm Wheel width 450 mm Module - max. 10 Module - min. 1 Number of teeth - min. 8 Cutter diameter x width 192 x 215 mm Distance table / center of milling spindle 910 / 630 mm Distance between workpiece center and milling spindle 50 / 550 mm Cutter travel 200 mm Swiveling range of the milling slide 240 degrees Table diameter 700 mm Table bore diameter 160 mm Milling spindle speed range 25 - 160 rpm Total power requirement 21 kW Tedpswzmp Usfx Abgjf

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - 8-OSNI CNC STRUŽNICA Z REZKALNO GLAVO, SPODNJO REVOLVERSKO GLAVO IN KONTRA VRETENOM MAKS. PREMER VRTENJA: 660 mm MAKS. DOLŽINA STRUŽENJA: 1495 mm MAKS. PREMER STRUŽENJA: 660 mm PREMER PALICE: 65 - 65 mm VRETENO: 35-5000 vrt./min; 22 kW; 254 mm KONTRA VRETENO: 35-5000 vrt./min; 18,5 kW; 254 mm GLAVA: CAPTO C6; -30°+195°; 15-12000 vrt./min; 18,5 kW HOD OSI X: 580 mm HOD OSI X2: 150 mm HOD OSI Y: 160 mm HOD OSI Z: 1545 mm HOD OSI Z2: 1490 mm HOD OSI B: 1550 mm HITRI POMIKI X-Y-Z: 38 - 26 - 38 m/min REVOLOVERSKA GLAVA: 9 POZICIJ MAGAZIN ORODIJ: VERIŽNI TIP; 80 POZICIJ Tsdpfx Ajw Ey R Hsbgof VISOKOTLAČNO HLAJENJE: 18 Bar KRMILNA ENOTA: MAZATROL MATRIX TEŽA: 11800 kg SKUPNE DIMENZIJE: 5090 x 3270 x 2830 mm OPREMA: TRANSPORTER OSTRUŽKOV; PAPIRNI FILTER; NASTAVLJALEC ORODIJ

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Tedpfx Aeiw Dlkebgof Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: rabljeno, Leto izdelave: 1989, Maximum wheel diameter: 400 mm Wheel width: 275 mm Maximum module: 6 Machine dimensions: 300 x 330 x 245 cm Machine weight: approx. 5.5 t Specification: Maximum wheel diameter: 400 mm Minimum module: 1 Maximum module: 6 Table diameter: 370 mm Maximum wheel diameter: - with counter support: 340 mm Tsdeu A I Elopfx Abgsf - without counter support: 400 mm Maximum axial displacement: 275 mm Maximum tangential adjustment: 100 mm Helix angle of teeth: 45 degrees Maximum cutter diameter: 145 mm Maximum hob length: 170 mm Hob speed range: 63–180 rpm Axial feed, steplessly adjustable: 0.2–10 mm/rev Tangential feed, steplessly adjustable: 0.1–5 mm/rev Radial feed for spur gears: 0.1–4 mm/rev Radial feed for worm gears: 0.025–1 mm/rev Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/rev Radial for worm gears: 100 mm/rev Motor power: 7.4 kW

Stanje: zelo dobro (rabljeno), Wheel diameter – max. 300 / 400 mm Wheel width 76 mm Module – max. 6 Module – min. 0.5 Tedpfx Absuwwlqegof Control system BWO CNC 921 Stroke slide displacement 94 mm/stroke Stroke 82 mm Strokes per minute 75 – 1000 spm Number of teeth 5 – 200 Cutter arbor mount SK 45 Table diameter 400 mm Total power requirement 50 kW Machine weight approx. 7.5 t Space required approx. 5.0 x 3.8 x 3.4 m Machine in very good condition!

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 Todpfxjtzdyzj Abgsf _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!