Optimizacija medsektorska linija

SALVADOR SuperPush 150

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output Bcsdpfx Aswhmdfog Tow 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Bedpfjfzktzsx Ag Tscw Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2001, Stanje: rabljeno, Sottoriva Bsdedqapbjpfx Ag Tjcw Sprint 30 Serijska številka: B31656 Leto: 2001, spiralni mešalnik s kapaciteto 30 l, spremenljiva hitrost, inox kotel in kontaktni deli, varnostni pokrov, z vgrajenim časovnikom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 990 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 3.900 mm, vhodni tok: 63 A, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, moč: 15 kW (20,39 KM), Oprema: dokumentacija / priročnik, Pelletizing plant for a wide range of materials, such as wood, Miscanthus, agricultural by-products and waste products (hay, straw, corn stalks, etc.), and feed. This is a complete plant built on a base frame and consisting of the following components: - Raw material storage bin, 4m³, including agitator. This has been expanded by approx. 3–4m³ using wooden panels. - Intermediate auger to the hammer mill - Hammer mill (11 kW) for processing wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing, and level control - Dosing container for pressing aids, feeds into inclined mixer - Dosing screw conveyor for optimal material feed to the press (speed-controlled) Bsdjxv Dkcepfx Ag Tscw - Press, 15 kW, including full indicator, temperature monitoring, and discharge chute - Conveyor belt to the dedusting screen - Dedusting screen with material outlet at 3 m height The system is designed for easy extension with a second press, each 15 kW. The entire plant is centrally operated via Siemens PLC with touch display. All parameters are monitored to ensure the press is safely shut down in case of faults. Remote maintenance allows operation and monitoring of the press from any PC. The chip dryer, shown on photo 2 mounted on the wall with discharge and control unit, is also for sale. Please contact us for further details.

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Bcodpfx Agjfnh Tgs Tsw Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.200 l, skupna višina: 6.000 mm, notranji premer: 2.800 mm, skupna masa: 1.400 kg, TEHNIČNE ZNAČILNOSTI - Posoda z ravnim dnom, naklon 2 % - Blagovna znamka: ALFA LAVAL - Skupna prostornina: 30 200 litrov - Material: nerjaveče jeklo 316 L - Notranja obdelava: hladno valjana - Zunanja obdelava: hladno valjana surova površina - Termoregulirana STREHA - Konična - 1 ekscentrični dimnik spredaj Ø 200 mm - 2 nerjaveča zastavica - 1 termometer - 6 dvigalnih obročev OBROČ - 1 ovalna vrata 310×420 mm - 1 ventil za delno praznjenje DN 65 - 1 priključek za sondo za merjenje nivoja DNO - Nagnjena plošča 2 % z odtokom - 1 ventil za popolno praznjenje s pokrovčkom Bcjdpfx Ajv I A Nleg Tjw PRILOGE - Rezervoarji, združljivi in primerni za shranjevanje tekočih gnojil - 6-mesečna garancija - V skladu s standardi CE

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: Bedjt R T Hcspfx Ag Tecw - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 288, Odluščevalnik z dovodnim trakom, za največji premer hloda do 460 mm ali 600 mm, hitrost do 100 m/min, reducirni rotor in odluščevalni rotor. Odluščevalni rotor z odprtino 620 mm je NOVO IZDELAN, z garancijsko dobo. Vključuje napravo za menjavo reducirnega rotorja. Na spodnjih fotografijah je stroj v trenutnem stanju – demontiran. Dobavni rok je 3 mesece od naročila. Bcsdstk N Dkspfx Ag Tow

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° Bcjdpfx Agsh Ayyqe Tjw - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Leto izdelave: 2007, Stanje: skoraj kot novo (rabljeno), Tehnične podatke si oglejte v PDF dokumentu. Bsdpsha Dm Tjfx Ag Tjcw