Stroj za rezkanje s hitro glavo

SAIMP

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Turning length: 1500 mm Swing diameter: 475 mm Swing diameter over cross slide: 290 mm Swing diameter in gap: 655 mm Spindle speed range: 14.0 - 2000 rpm Longitudinal feeds: 0.05 - 0.736 mm/rev Spindle bore: 61.0 mm Tailstock taper: MK 4 Quill stroke: 200 mm Quill diameter: Ø 70.0 mm Spindle nose: DIN 55022 GR 6 Bed width: 330 mm Voltage: 380 V Total power requirement: 7.5 kW Weight: 2400 kg Dimensions LxWxH: 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) In good condition (!!) With original documentation and machine card Features: - Robust conventional electrically driven lathe - KLOPFER 4-jaw chuck Ø 200 mm - MULTIFIX tool post with 3 inserts - Adjustable tool post guard - Adjustable bed stop - Machine bed with removable bridge (gap) Itjdpfsxfwc Rox Al Nsf - Moveable tailstock including live center - Pivoting machine lamp - Machine anti-vibration feet - Chip backsplash (rear sliding) - Emergency stop button at front - Original operating manual and machine card

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Itsdpowbuyzefx Al Nsf

Stanje: dober (rabljeno), Spindle diameter: 80 mm Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Itjdpfxsphl Eco Al Njf Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Machine weight: 10 tons

Stanje: dober (rabljeno), x-travel 410 mm y-travel 310 mm z-travel 400 mm Main spindle taper SK 40 Table clamping surface 700 x 280 mm Iodpfx Alei Elydo Nstf Speed range 45 - 2000 rpm Quill stroke 63 mm Total power requirement 2.2 kW Machine weight approx. 1300 kg Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage 400 V 3-axis digital readout Heidenhain Fixed angle table Coolant system Swivelling vertical milling head

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking Isdpfxjrqwbie Al Nstf • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section Ijdpeilqvrsfx Al Netf - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Ijdpfxjdmn E Hj Al Netf

Stanje: novo, Leto izdelave: 2024, Laser source: 12 kW Raycus/IPG Itjdpfx Alsi Ar Rue Nof Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Working area (effective): 1520 x 3050 mm Maximum positioning speed: 120 m/min Maximum acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Maximum table load: 1500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ekscentrična granulacija EGR se uporablja pri proizvodnji temperaturno in strižno občutljivih plastik. Posebej je zasnovana za granulacijo mehkega PVC, trdega PVC, HFFR receptur ali spojin na osnovi elastomerov za nizko-, srednje- in visokonapetostne kable. Iedpfxjw Iu T Tj Al Njtf Poleg tega se lahko naprava uporablja tudi kot klasični ekstruder z enim polžem za različne namene predelave. • Premer polža: 200 mm • z odvzračevalno cono • Pogonska moč: 72,5 kW

Stanje: novo, *TECHNICAL SPECIFICATION: Iedpsg Ezarefx Al Nstf Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.