Stroj za upogibanje profilov

Saf DS 60 HP Plus

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1993, številka stroja/vozila: 1590, Oprema: hidravlika, kabina, Zenith Maschinenfabrik GmbH Neunkirchen/Siegerland, DEUTSCHLAND Einsatzbereich: Herstellung von vibrogepressten Betonpflastersteinen und Bordsteinen. Die Maschine ist voll funktionsfähig und wird zusammen mit 2 Mischern, Zuschlagstoffbunkern, Skippern, Verpackungsmaschine sowie 150 Produktionspaletten verkauft. Enthalten sind außerdem Formen für verschiedene Pflasterstein-Modelle. Bsdpfxoucruuj Aa Roli Zum Verkauf steht außerdem eine mobile Zenith 941 II A aus dem Baujahr 1978, ebenfalls mit Typenschild. Der Verkauf erfolgt, da die Maschine durch neuere Technologie ersetzt wurde.

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch Bjdpfjgg N Twsx Aa Rsli - Emergency stop - Documentation - 400V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Bledpfxowd N Urs Aa Roi Including water tanks for water treatment. Including fan for glass drying. Outfeed zone with inspection lamps. Processing dimensions: Max. glass height: 3,000 mm Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW Bledst Hwfnspfx Aa Rji - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm - Solid material up to 35 mm - Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality • For the use of ball mandrels • Mandrel is automatically retracted during the bending process Blsdexcuicepfx Aa Rsi • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: rabljeno, Leto izdelave: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Blodpfsxacdvjx Aa Roi Bending capacity: 8.0 mm (steel) Top roller diameter: approx. 205 mm Side roller diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept enables a wide range of bending and rounding operations - Swiveling control unit at the front * Operation and control of all rollers and machine axes * Digital position display * Manual operation via joysticks - Bending diameters of up to 1.1 times the top roller diameter possible - Forged and hardened rolls with a strength of 53-55 HRC - Low-maintenance, stable machine design - Heavy-duty steel welded construction - Electro-hydraulic drop-end for easy removal of rolled pipes - Manometer / pressure gauge for the rolls - Safety device (safety cable with switch unit) - Operating manual (PDF)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Bjdpfxexabkbe Aa Reli Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: novo, Leto izdelave: 2026, premer spodnjega valja: 220 mm, premer zgornjega valja: 220 mm, premer stranskega valja: 180 mm, premer valja: 220 mm, dolžina valja: 2.070 mm, najv. debelina jeklene pločevine: 10 mm, lastna masa: 4.500 kg, - 4 valjka - Kapacitet 2070 x 10 - Kapacitet savijanja 2070 x 8 - Očvrsnuti valjci - Prečnik gornjeg valjka 220 mm - Prečnik donjeg valjka 220 mm - Prečnik bočnog valjka 180 mm - Hidraulični pogon Bodpfx Aasr H Df Ie Roli - Digitalni prikaz za levi pomeraj valjka - Digitalni prikaz za pomeranje srednjeg donjeg valjka - Digitalni prikaz za pomeranje desnog valjka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Hidraulički pokazivač za jednostavno pozicioniranje valjaka - Hidraulični sistem podizanja i spuštanja sa međutim i centralnim valjkom - Gornji valjak je hidraulično otvarajući - Čelična konstrukcija ST-52 - Hidraulični drop-end za lako pozicioniranje valjka - Hidraulični sistem podizanja i spuštanja sa centralnim i bočnim valjcima - Hidraulički balans sistem - Zaštita od prenapona - Dokumentacija - 400V

Stanje: novo, Leto izdelave: 2025, Protec welding turntable, 5000 kg load capacity Continuously variable speed control: 0.05 - 0.5 rpm Hand-held remote control Bledpfx Aaeid Szcj Rei Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at extra cost

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Bledouxftropfx Aa Rji Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.