Stanje: novo, Screw compressor with refrigerant dryer Belt-driven. Space-saving. Cost-effective. Easy operation thanks to Infologic² Basic control system. Efficient compressor stage. Perfect solution for industrial and craft enterprises. Convincing compressed air quality. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerant dryer: Integrated, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Motor nominal power; IP55: 7.5 kW Oil quantity: 3.2 liters Pressure dew point of dryer (20°C 100% RH): approx. +3 °C Installation data: Ambient conditions min. / max.: 1 / 46 °C Δ T over cooling medium temperature: 2 °C Cooling air requirement: 756 m³/h Free fan pressure: 30 Pa Sound level: 68 dB(A) Voltage / PH / Frequency: 400 / 3 / 50 V / Ph / Hz Dryer power rating (230V/50Hz): 0.27 kW Dimensions and weight: Length x Width x Height: 1540 x 665 x 1350 mm Weight: 240 kg Compressed air outlet: G 1/2" female thread Air receiver volume: 270 liters INCLUDED OPTION: Aftercooler C43 MINI (reduces condensate formation to a minimum) Ltodpfxjwm Ih Ae Ah Asa

Stanje: novo, Screw Compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor system including refrigerated dryer and 270 L receiver tank. Belt-driven. Space-saving. Cost-effective. Simple operation thanks to Infologic² Basic control. Efficient compression stage. The perfect solution for industrial and craft businesses. Outstanding compressed air quality. Integrated refrigerated dryer. Detailed equipment: Compression concept: Oil-lubricated screw compressor Lodpfxshun Tzs Ah Asta Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Infologic² Basic control unit Refrigerated dryer: Integrated, refrigerant R513A Receiver tank: 270 L horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 L/min Including timed condensate drain Dimensions (L x W x H): 1500 x 1350 x 600 mm

Stanje: novo, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Outstanding compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed Features: Compression Concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-adjusted via frequency inverter Controller: Graphic control unit C55DD Refrigerated Dryer: Integrated, refrigerant R513A Filtration: Includes cyclone separator Tank: Horizontal, painted Performance Data: Volume flow at 7.0 bar operating pressure: 0.26–2.26 m³/min Operating pressure min./max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil volume: 5.2 liters Dimensions and Weight: L x W x H: 1655 x 655 x 1550 mm Ljdpfx Aeixt I Hsh Aeta Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air tank capacity: 270 liters

Stanje: novo, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Simple operation. The perfect solution for industrial and craft businesses. Outstanding compressed air quality. Integrated refrigeration dryer. Sound-insulated screw compressor with V-belt drive mounted on a 270 l air receiver, featuring an integrated refrigeration dryer, built-in cyclone separator, electronic condensate drain, and graphic C55 controller. Detailed specifications: Compression system: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt-driven Control: Fixed speed Controller: Aircontrol 5.0 Refrigeration dryer: Integrated, refrigerant R513A Filtration: Including cyclone separator Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Free air delivery at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min./max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 10.2 kW Motor rated power; IP55: 7.5 kW Lodpfx Ahjixt H Nj Asta Oil volume: 4 l Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Air receiver capacity: 270 l

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Ltjdpfx Ahswd N Rmo Aja Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Heated platen press with medium-heating plates Press area: 2750 x 1300 mm Number of press cylinders: 6 Total pressing force: 100 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 3.0 kW Required space (L x W x H): approx. 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic heated platen press Under-piston design Medium-heating plates – for connection to central hot water supply Pressing pressure steplessly adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety pull-wire Rack compensation Main switch Automatic opening system Stroke limitation Ltsdsvzq Rkspfx Ah Asa CE compliant NEW aluminium cover plates

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Ltedot Dx U Sspfx Ah Asa Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), COLUMBUS Vacuform Standard Visoko zmogljiva vakuumska črpalka BECKER Vakuumski rezervoar 200 l Ltjdpfx Aoxgg Tboh Asa Digitalna regulacija tlaka Digitalni prikaz tlaka vakuuma Izjemno elastična membrana iz naravne gume Stabilna delovna plošča Vrtljiva kolesa z zavoro Delovne dimenzije pribl. D x Š 2900 x 1300 mm Maks. pritisk stiskanja 0,85 kg/cm2 = pribl. 29 t Napajalna moč 0,75 kW, 400 V 50 Hz Prostornina rezervoarja 200 l CE Transportne dimenzije pribl. D x Š 3100 x 1550 mm Teža pribl. 400 kg

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Lodpsxqggcsfx Ah Asta Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. Ltodpfx Ahoudxchj Aja • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Ltedstwzyfspfx Ah Aea Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Ledpfeitvkuex Ah Ajta Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 – 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 15.0 with inverter Feed speed variable m/min: 3.5 – 18 Working units: 1st unit: "RA" diagonally grooved steel contact roller, diameter 160 mm 2nd unit: Combination: Rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments C version: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller/pad unit - Sector activation via electronic control, synchronizing engagement with the feed speed and regulating the number of segments based on workpiece geometry, enabling selection of more or fewer sectors on the left and right sides of the workpiece. Ltedpshtuvrjfx Ah Aja - Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing bar at the infeed Additional features: Roller table in infeed and outfeed for long workpieces Perforated table and feed belt Vacuum table with integrated 4 kW (5.5 HP) electric fan in the machine frame Oscillating blow-off device 2nd unit Touch screen 10.4” display with ‘eye S software integration’ ATTENTION: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: novo, Edge sanding machine with oscillating sanding belt - made in AUSTRIA Electrical connection: 380/400V Motor power: 2.2 kW Oscillation: 0.18 kW Sanding belt length: 3000 mm Sanding belt width: 200 mm Table size: 1000 x 300 mm Ljdpfx Aj Dxrgoh Asta Weight: 300 kg Roller diameter: 120 mm Interchangeable contact roller, diameter: 65/115 mm Round sanding attachment with support table: 350 x 250 mm Mitre fence Central extraction port: 140 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Ltsdpeuxqzuofx Ah Aea Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, With the RFM 320 S SET model, we offer you a grinding machine that allows you to produce bevels up to 16 mm wide quickly and with optimal grinding quality in a single pass. Short setup times ensure efficient processing, even for individual workpieces. The RFM 320 S SET is equipped with a grinding belt oscillation system featuring pneumatic belt cleaning and a pre-milling unit. Lodpfx Aof E Nqdeh Aeta Standard equipment RFM 320 S SET: › Adjustable grinding tool for 8 radii (2, 3, 4, 5, 6, 8, 10, and 12.5 mm) › Bevel grinding device for bevels up to 16 mm width › Grinding belt oscillation with pneumatic belt cleaning › Integrated base for feed unit › 16A socket for feed › Suction connection Ø 80 mm Pre-milling unit Undercarriage Extendable table extension Setup dimensions (L x W x H in mm): 1,300 x 690 x 1,010 Weight: 145 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. Ltsdpfx Astt Da Djh Asa • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: novo, Altendorf F 35 Typ 1 - 1000 Formátovací pila Robustní, výkonná, vysoká výška řezu – ideální pro masivní dřevo! - Nový stroj – ihned k dodání - Výkon motoru 7,5 kW, 400 V, 50 Hz, 3 rychlosti Motorické nastavení výšky a úhlu Velký ochranný kryt Dvojitý válečkový vozík 3 200 mm Příprava pro předřez Podélný doraz, šířka řezu 1 000 mm Úhlový a pokosový doraz 3 450 mm, bez délkové kompenzace Prodlužovací/rozšiřující díly stolu: práškově lakovaný povrch Rozsah naklápění pilového kotouče: 0 - 46° Ledjxtbtpopfx Ah Aeta Délka vozíku: 3 200 mm Délka řezu: 3 100 mm Šířka řezu: 1 000 mm Výška řezu: 154 mm Max. průměr pilového kotouče: 450 mm Velikost obrazovky: 15 palců Pracovní výška stolu: 910 mm Průměr odsávacího hrdla: 80 + 120 mm Včetně příslušenství: M45102 podélný doraz 1 000 mm Digit_X M64300 přední opěrný váleček M99008 držák vzorků

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Lodsv D H Siopfx Ah Aota Right and left rotation 2 abrasive belt speeds Abrasive belt cover on top CE compliant Includes special grinding shoe Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Belt Sander LANGZAUNER Model LZG Approximate table dimensions: 2500 x 800 mm Approximate sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Sanding belt cover (top) Work area light strip CE compliant Ltedeuxnyuspfx Ah Aja Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Notes on used machines: • Subject to technical changes, errors, and prior sale. • Quoted prices are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, without any warranty entitlement. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! Ledjv Hm Nmspfx Ah Ajta • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: novo, Technical Data: Deflection pulley diameter: 800 mm Max. cutting height: 400 mm Max. cutting width: 780 mm Table dimensions: 580 x 810 mm Lsdpfx Aheby U Dpo Asta Tilting table up to 15 degrees Max. blade width: 80 x 0.8 mm Saw blade length: 5380 - 5530 mm Motor: 11.0 kW, 400 V, 50 Hz Extraction diameter: 2 x 100 mm Wheel speed: 680 rpm Extraction connection: 1 x Ø 100 mm & 2 x Ø 120 mm Compressed air connection: 6 - 8 bar Machine weight: approx. 850 kg Machine dimensions (L x W x H): 1550 x 950 x 2500 mm Features: - Welded steel frame, fully enclosed - Pneumatic brake - Support table made of ground and grooved cast iron - Upper and lower blade guide with interchangeable inserts - Star-delta switch - Emergency stop button on the main control panel - Cutting height 600 mm - Telescopic blade guard - Cast table tiltable by 20° - Saw blade cleaning unit with diesel tank - Fence with millimeter scale and magnifier - Blade tension indicator - Doors with key lock - Cleaning brush on the deflection pulleys - Width stop can be used on both sides, cast iron - Cast iron deflection pulleys, rubber-coated, balanced - Motor protection switch - CE compliant version CENTAURO Model RVP200 Feed roller height: 160 mm Counterpressure roller stop height: 160 mm Variable feed speed: 1 - 21 m/min Pneumatic opening/closing of the feed Max. distance saw blade – feed approx. 220 mm Max. distance saw blade – counterpressure roller stop approx. 200 mm CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Cutting length: 2,000 mm Cutting width: 1,050 mm with manual adjustment and fine manual adjustment Manual height adjustment of the saw blade Ltodpfx Ahsp Duwce Aoa Mitre stop, cross cuts up to 3,200 mm Motor power: 5.5 kW with 3 speeds: 3/4/5000 rpm Maximum cutting height: approx. 140 mm Maximum saw blade diameter: 400 mm CE compliant Note on used machines: • Technical data is subject to errors and prior sale. • All prices are ex works – free loading at location! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Saw blade height and tilt adjustment via foot pedal Digital display for saw blade height and angle Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant Saw blade tilting up to 45.5 degrees Maximum cutting height 145 mm Maximum saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/4000/5500 rpm Motor power 5.5 kW Extraction port diameter 120 mm Cutting length 3300 mm Including operating manual Including tools Dimensions (L x W x H): 3300 x 3800 x 1400 mm Weight approx. 1365 kg Lsdpsmmb Acofx Ah Asta Note on used machines: • Technical data is subject to error and prior sale. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!) General: Cutting width adjustment via handwheel at the front of the machine Digital display for cutting width Saw blade height and tilt adjustment via foot pedal Scoring unit adjustable by electric motor Crosscut table length stop with digital display Parallel fence foldable CE compliant

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Ltjdpfxocrnm Nj Ah Aja Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife