Naprava za nadzor temperature olja

S.I.S.E 250H6 DC68

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Csdpfx Afsg Ey Rfsqohf Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Cedpfxjvuua Nj Afqehf Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms An optional soundproof booth can be offered – price upon request.

Stanje: rabljeno, Regoplas RT50 termo-olaj hőmérsékletszabályozó egység, termo-olaj 300°C-ig Chodpodmn E Hofx Afqef

Leto izdelave: 1968, Stanje: dober (rabljeno), for aluminium Chjdpe A Dimefx Afqsf Strip width: max. 1,050 mm Strip thickness: 10 - 20 µm

Stanje: zelo dobro (rabljeno), For sale is a system comprising 2 OPS Ingersoll Gentry Eagle 500 machines and an Erowa automation solution for tool and workpiece changing. The system is in very good condition and fully operational. Both machines are loaded via Erowa automation; one of the machines is also equipped with its own tool changer. Technical data sheets are available for download below in the listing. Technical Specifications of the EDM Machines: Tank dimensions (W x D x H): 770 x 670 x 440 mm Dielectric fluid height: max. 395 mm Max. head load: 100 kg Min. distance: 135 mm Max. distance: 585 mm Rotation speed: 1–20 rpm Measuring resolution: 0.001° Worktable (W x D): 750 x 650 mm Load capacity: 1,000 kg Travel range X/Y/Z: 525 x 400 x 450 mm Filter system: Cartridge filter Filter area: 16 m² Total volume: 400 l Dimensions (W x H x D): 1356 x 2653 x 2284 mm Weight: approx. 4,400 kg Technical Specifications of Erowa Automation: X-axis: 1,200 mm Z-axis: 1,050 mm C-axis: 350° A-axis: +/-180° Cedpfx Afeq Su Hnsqehf B-axis: +/-90° Y-axis: 1.1–18.74 m (METERS!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines. Dismantling, loading, and shipping can be organized across Europe at additional cost. Prices are exclusive of VAT. Inspection available by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or do you want to sell yours? For further information or contact options, please visit our website.

Leto izdelave: 2022, Stanje: novo, - Discharge: 500 mm - Elevator belt: 1300 mm - Infeed: 600 mm - Usable width: 350 mm / Total width: 405 mm - Discharge height: min. 700 mm, max. 1000 mm - Cleats: 30 mm high (from a usable width of 350 mm, the cleats are split in the middle) - Cleat spacing: 500 mm Available on request: - Special dimensions - Cycle control Chjdpfsf U Eu Hox Afqof - Frequency converter

Leto izdelave: 2003, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBUT133-544, DEMAG KBK crane overhead track system with approximate dimensions 10.5 x 6 m Load capacity / lifting capacity: 500 KG - 0.5 t Technical data of the system: Crane runway made from Demag KBK1/2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets Including 500 KG steel chain hoist – lifting height approx. 3 m Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1600 KG. Chsdpsty Sxwefx Afqsf Please inquire about your desired crane runway with required capacity and dimensions – non-binding request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19101105, širina valja: 1.100 mm, Oprema: Na voljo je tipska ploščica, popolna servisna zgodovina, The SDFM-1100 roll-to-roll laminator is a multifunctional machine for lamination processes. It is designed for both cold and hot lamination. The paper is laminated on one side with film and then the web is rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system delivers the paper to the laminating section, where heat and roller pressure bond the paper and film together. The rollers are equipped with a heated water circulation system with constant temperature control. The paper roll is held in place by shafts, which are controlled by a pneumatic brake. The paper is unwound to a web aligner, which is equipped with an automatic system to align the paper web before lamination, ensuring an even film coating. In the laminator, non-adhesive film is coated with water-based adhesive and subsequently dried via a heated cylinder, or pre-coated adhesive film is unwound directly to the laminating cylinder. The laminating cylinder is heated by induction heaters. Under the laminating cylinder, paper is bonded to the film by heat and pressure generated by a lower rubber roller, which presses the film and paper together onto the laminating cylinder. The laminated web is then wound onto a core in the receiving section, from where it can be transported to further production processes. SDFM-1100 Specifications: - Maximum roll width: 1100 mm Chsdpfx Afovy Aipjqsf - Maximum roll diameter: 1100 mm - Paper weight: 80 - 500 g/m² - Film thickness: 10-50 microns - Operating speed: 10 - 65 m/min - Electric voltage: 380V 50Hz - Total power: 78 kW - Maximum energy consumption: 30 kW - Total weight: 8000 kg - Machine dimensions: 10130×2130×2960 mm

Leto izdelave: 2022, Stanje: novo, Discharge: 500 mm Incline conveyor: 1800 mm Feed: 600 mm (incl. hopper) Usable width: 250 mm Total width: 305 mm Codeh T T Tdepfx Afqjhf Cleat height: 30 mm Angle adjustable Mobile

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), številka stroja/vozila: BO8xx, DEMAG KBK overhead crane runway, approx. 6x5m (5m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 KG - 0.5t Technical data: Crane runway made of Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, carriages/trolleys, end plates, brackets/hangers, etc. Crane features integrated power supply Including 500 KG Demag electric chain hoist – approx. 3.5m lifting height – with raised trolley Crane is dismantled and available immediately Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarding or pickup by appointment only Chjdpfeupvyvsx Afqsf Demag KBK1, KBK2, and KBK3 rails available from stock! Other KBK systems also in stock. Load capacities from 125 KG to 1600 KG. Please send an enquiry with required crane runway load capacity and dimensions for a non-binding offer.