Hladilni stroj

RPS FAS096

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Dcsdpfx Anew D Aq Tousn Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: dober (rabljeno), APV BAKER ploščni izmenjevalnik Izdelek: D-1746-APV-Baker-N35-15m3 izmenjevalnik Izmenjevalnik toplote iz nerjavečega jekla za pasterizacijo z 2 sekcijama, Kapaciteta: 2 x 15 m3, Dcodpfeimmb Sox Anuen Delovni tlak: 6 bar, 47,9 m2, Temperatura: 120 °C.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Dcedpfxouz If Nj Anusn Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC Dcsdjuua H Rjpfx Anuon See video The machine is powered and available in our warehouse Test run possible

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Moč: 6,5 / 9,4 kW Dcjdpfom Exdwjx Anujn Lastna teža: 365 kg Na voljo je več takšnih naprav! Nakladanje in/ali pošiljanje je mogoče!

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), Gebrauchter Bitzer 4TCS-8.2Y-40P/sn 1672508990, halbhermetischer Hubkolbenverdichter für Freon. Scrollverdichter ESH736Y-40S/sn 1072500425, 2 stehende Behälter Bitzer FS 152/sn 1172402177 und Bitzer FS 302/sn 1172601712 Das System ist komplett mit Ölabscheider, Öltank sowie Druck- und Sicherheits-schaltern/-manometern. Baujahr 2007. Nennbetriebsdruck: 19 bar Volumenstrom: 41,33 m³/h Motorleistung: 20,6 kW Spannung: 400 V Frequenz: 50 Hz Schalldruckpegel: 74,5 dB(A) Gewicht: 134 kg Zustand: gut Kälteleistung: 21,6 kW Kältemittel: R404A Zylinderzahl x Bohrung x Kolbenhub: 4 x 60 mm x 42 mm Sauganschluss: 35 mm – 1 3/8" Druckanschluss: 28 mm – 1 1/8" Leistungsdaten nach EN12900 Dsdpfoir E Dnjx Anujcn ▼ tc ► to 5°C 0°C -5°C -10°C -15°C -20°C -25°C -30°C 40°C Q [W] — — 27759 22788 18477 14755 11559 8831 P [kW] 9,86 9,05 8,2 7,34 6,46 5,57 I [A] 16,69 15,43 14,14 12,83 11,52 10,22 45°C Q [W] — — — 20560 16622 13219 10294 7796 P [kW] 9,41 8,47 7,52 6,57 5,6 I [A] 15,99 14,54 13,1 11,67 10,26 50°C Q [W] — — — 18347 14792 11714 9065 6801 P [kW] 9,74 8,71 7,68 6,65 5,61 I [A] 16,5 14,91 13,34 11,8 10,28 Hinweise: • tc – Verflüssigungstemperatur • to – Verdampfungstemperatur • Q [W] – Kälteleistung (R404A) • P [kW] – Leistungsaufnahme • I [A] – Stromaufnahme Preis: 2.250 EUR zzgl. MwSt., verhandelbar, FCA: Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch, Deutsch, Ungarisch, Französisch und Rumänisch.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Dcsdpfohwwyrjx Anuen Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Dodpfxow I E R Nj Anuscn Sila zapiranja: 6600 kN Teža stroja pribl.: 45,5 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna masa: 2.200 kg, moč hladilne črpalke: 180 W, dolžina tračnega lista: 4.570 mm, širina tračne žage: 41 mm, AMADA HFA 400 – Automatic Bandsaw for Metal Serial Production | AMADA Quality | Industrial Grade The AMADA HFA 400 is an automatic horizontal bandsaw designed for metalworking, engineered for precise, repeatable cuts in high-volume production environments. This machine stands out thanks to its compact design, robust construction, and proven AMADA machine tool technology. With a machine weight of 2,200 kg and fully automatic sawing cycles, the HFA 400 is ideally suited for manufacturing plants, service centers, and toolmaking operations. ● automatic bandsaw for metal ● AMADA brand quality ● robust construction – 2,200 kg ● saw motor: 5.5 kW ● industrial-grade hydraulics ● automatic cutting sequences ● high precision and repeatability ● suitable for solid stock and profiles ● durable and reliable design Technical Data ● Model: AMADA HFA 400 ● Type: automatic bandsaw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Saw blade dimensions: - Length: 4,570 mm - Width: 41 mm - Thickness: 1.3 mm ● Mains connection: 3-phase ● Connected load: 11 kVA Dcodpfxoyc H Ewe Anujn ● Machine weight: approx. 2,200 kg ● Year of manufacture: 2012 Condition: used, fully operational, ready for immediate use 📩 Contact us for price and further information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ENR series are air-cooled chillers designed for industrial use, suitable for both outdoor and indoor installation. The ENR 016 features axial fans, scroll compressors, an internal P3 pump, condensers with finned aluminum coils, and a self-cleaning coaxial evaporator to ensure maximum operational reliability. Cooling capacity: 13.5 kW Dcedpfx Aofmd E Senuen We have a large selection of chillers available directly from stock, both new and used. Contact us for a non-binding offer.