Univerzalni rezkalni stroj

Rogi WUM100

Stanje: rabljeno, Univerzalni orodni rezkalni stroj Znamka: OPTIMUM Model: MT 100 Dedjw Rlvqepfx Altouw Leto izdelave: 2018 – delavniško preizkušen Št. stroja: J33021808035 Geometrijsko prevzemanje s preizkusnim protokolom Oprema: - 3-osni digitalni prikaz DPA 2000 - Vertikalna rezkalna glava SK 40 z navojem M 16 - Fiksna miza 1.120 x 260 mm (T-utor: 14 mm) - Strojna luč - Naprava za hlajenje - Ročno centralno mazanje - Navodila za uporabo Rabljeno kot vidno, brez garancije. Stroj je tehnično ustrezen stanju iz leta izdelave.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev Dusdpfoirax Usx Altow -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: rabljeno, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel (X, Y, Z): 400, 400, 370 [mm] Duodpfx Aouhbxaoltew - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis HEIDENHAIN digital readout - Chip guard

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Duodpfx Aljh I Nqwstew Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Leto izdelave: 2020, stanje: kot nova (razstavni stroj),

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Centre height 130 mm Swing diameter over bed 260 mm Swing diameter over cross slide 140 mm Distance between centres 600 mm Spindle bore 30 mm Bed width 255 mm Spindle mount DIN 55027 Gr. 5 Drehzahlbereich 35.5 - 3150 rpm Longitudinal feed range 0.04 – 0.4 mm/rev Cross feed range 0.02 – 0.2 mm/rev Metric threads 0.2 – 18 mm Inch threads 2 – 76 tpi Module threads 0.4 – 13.5 module Diametral pitch threads 2.6 - 36 DP Tailstock taper MK 4 Drive power 3 kW Dimensions L x W x H 2140 x 850 x 1400 mm Weight 1100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post "Multifix" size B Duedpfexz Rfkox Altew • Coolant system with chip guard • Chuck guard • Hardened bed ways • Machine lighting • Bed stop • Emergency stop switch New brake discs, new drive coupling, new V-belts and new gearbox and V-belt bearings in 2026, repair costs €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Stanje: novo, Leto izdelave: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1750 rpm Table area 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space requirement approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations with digital 3-axis position display DPA 31 Plus Description: - Heavy-duty, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground and hardened gears - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precision-machined surface with T-slots and adjustable gibs - Milling head tiltable ±45° - Clockwise/anticlockwise rotation Dodpfx Astv Riajltouw - X-axis traverse optionally via handwheel or table feed unit - Automatic end-stop on the X-axis - Height-adjustable safety shield with microswitch to protect user from flying chips and parts for maximum safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Mounting arbor for drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, for side and slab cutters Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal use - T-slot nuts - Drift - Operating tools

Stanje: novo, Swing diameter: 400 mm Turning length: 1,000 mm Speed range: 70 – 2,000 rpm Weight approx.: 500 kg Description: - Lead- and feed-screw lathe features a robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing achieved through heavily ribbed GG cast iron - Hardened and ground face spindle ensures high accuracy and durability - High material removal rates during rough machining enable production of fine surfaces and tight tolerances - Wide range of threads and feeds without requiring a gear change in the change gear compartment - Bed guideways hardened and precision-ground - Perfectly running main spindle mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic brake for the main spindle - All controls (electrical) are centrally accessible - 4-position longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA 21 - User-friendly membrane keypad, splash-proof, sealed, and anti-glare - Increased working accuracy - Reduced error rate - X, Y, Z0, and Z-axes each with 8-digit display - Glass scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground - Shafts run on needle bearings - All components lubricated in an oil bath Apron – Housing fully sealed - Safety feature to prevent simultaneous operation of threading and feed mechanism Tailstock – Hardened and ground quill, generously dimensioned, quill with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Full illumination of the work area Main spindle – Perfectly concentric running, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad - Machine lamp - Coolant pump - Direct drive - Two-speed motor control - Emergency stop button Coolant tank – Removable, level indicator, easy and complete draining/cleaning Control cabinet – Clearly arranged, 24V DC power supply, all contactors and relays from Schneider or Siemens Chip tray – Hinged, easy chip cleaning Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6 to MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Dsdpjd Eauksfx Altsuw Phase(s): 3-phase Current type: AC Network frequency: 50 Hz Spindle mounting: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation: Centre height: 200 mm Distance between centres: 1,000 mm Swing over bed: 400 mm

Stanje: dober (rabljeno), x-travel 400 mm y-travel 375 mm z-travel 250 mm Table size 205 x 800 mm T-slots 4 x 45/14 H7 Spindle speeds 50 - 3150 rpm Tool holder 40 ISO Quill stroke 50.0 mm Feeds X & Z axes 5.0 - 1000 mm/min Feed Y axis 5.0 - 670 mm/min Rapid traverse 2.4 / 1.6 m/min Control system Heidenhain Total power requirement 5.1 kW Weight 950 kg Dimensions (L x W x H) 1860 x 1790 x 1750 mm From a training workshop (vocational school) Well-maintained condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN positioning/contouring control "TNC 135" * 3-axis manual input control * Programmable by machine operator * Practical and simple operation Dsdpfxjxl E Syj Altouw - Electro-motorised feeds on all axes (X/Z/Y) * X and Z axes: 5.0 - 1000 mm/min with rapid traverse 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse 1.6 m/min - Swivelling milling head in both directions - Tilting T-slot universal table - Vertical clamping area - Infinitely variable spindle speed adjustment - Manually extendable quill - Hardened and ground guideways - Electro-hydraulic tool clamping - Coolant system - Front coolant drip tray - Operating manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 300 mm, pomik po osi Z: 700 mm, skupna višina: 2.800 mm, skupna dolžina: 1.350 mm, skupna širina: 1.260 mm, teža obdelovanca (maks.): 300 kg, širina mize: 450 mm, skupna masa: 2.300 kg, vrsta vhodnega toka: trifazni, dolžina mize: 888 mm, globina vrtanja: 500 mm, Technical Equipment - 4-position guide changer - 32-position electrode changer - Preparation for rotary-swivel axis - High-quality drive axes and guideways - Integrated compressor cooling units for electronics and external connection option for dielectric cooling - High erosion performance thanks to MOSET generator - Fine filter for working with small tube diameters EROSIX CONTROL - Fast probing Dusdpfsvppw Sox Altjw - Easy programming of complex 5-axis machining operations - Comprehensive measuring cycles - Program transfer and storage via TCP/IP interface - High operating convenience