Univerzalni stroj za brušenje orodij

Rogi U2

Stanje: dober (rabljeno), Leto izdelave: 1972, LZ-strojni stružnica Izdelovalec: HEIDENREICH & HERBECK Tip: 21RO l. 1972 Bedst Ipi Ispfx Afnewi s hitromenjalnim držalom Parat (10 kosov), dokumentacija za stroj, natančni kazalnik navojev, koničast hrot, 250 mm Forkardt vpenjalno glavo. Premer struženja nad posteljo: 430 mm Premer struženja na suportu: 255 mm Dolžina med konicama: 1000 mm Dolžina struženja: 750 mm Hitrosti vretena: 19–2000 min⁻¹, motor 5,5 kW Premer luknje vretena: 56 mm Ostali podatki v tehničnem listu Potrebni prostor: dolžina 2900 mm, širina 1100 mm, višina 1300 mm, teža cca 1750 kg. Strojna dokumentacija priložena. Vgrajena hladilna naprava, zadnja stena za odvajanje odrezkov. Stroj je v dobrem stanju, možen preizkus pod tokom.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Komorna elektrostatika peč za prašno lakiranje: dolžina: 500 cm, širina: 250 cm, višina: 300 cm Bsdpfxev Nvndo Afnjwi - Kabina za prašno lakiranje s filtrom: dolžina: 300 cm, širina: 220 cm, višina: 270 cm - Elektrostatika oprema za prašno lakiranje: model: HMK MULTICOLOR, način uporabe: ročni

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, skupna masa: 2.500 kg, največja dovoljena obremenitev: 2.500 kg, tip droga: teleskopski, Self-propelled battery-powered crane by renowned Italian manufacturer JMG, model MC25S with radio remote control and a lifting capacity of 2,500 kg. Brand new machine, available for inspection. Distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. DRIVE SYSTEM: Electric Bwodpfx Aowtppzofnji BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM ANGLE UP: 60° BOOM ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant structure made from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of a base unit, hydraulic telescopic system and one mechanical extension. Boom elevation and extension are hydraulically operated using telescopic cylinders. TRAVEL MOTOR: 2 electric motors, 2 kW, 24V AC, insulation class H. PUMP MOTOR: Electric motor 3 kW, 24V DC, insulation class H. DRIVE: Electronic speed control, MOSFET type. BATTERY: 24 V 420 Ah, with charge indicator. DRIVE TRANSMISSION: Front axle driven by two gearboxes. WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2 -8", 2 pcs. BRAKES: Automatic on front wheels. STEERING: Rear axle steering via electric motor. Max. steering angle ± 90°. CONTROL: Operated via radio remote control. HYDRAULIC SYSTEM: Powered by a low-noise 3 kW gear pump. Cylinders operated by an electro-proportional distributor controllable via radio remote. Equipped with a filter and safety valve. Max. working pressure 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter. STANDARD EQUIPMENT: • Max. lifting capacity 2.5 t • Front wheel drive via two gearboxes (one per wheel) • Hydraulically telescoping boom (1 fixed section, 2 telescopic sections) • Manual mechanical boom extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and travel • Electronic load indicator and limiter compliant with CE standards • Boom inclination +60° / -15° • CE conformity declaration • Operation manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tires • Battery water refilling system • On-board mobile charger • Manual three-position jib (1.0 t)

Leto izdelave: 1977, Stanje: rabljeno, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, 3-jaw chuck, and Multifix toolpost. The guideways in the front section show wear. The machine is in ready-to-use condition and can be demonstrated under power by arrangement. Bsdpfx Afemdn Dxsnewi

Stanje: rabljeno, Delovna širina 630 mm Višina skobljanja 220 mm Hitrost podajanja 7/9/14/18 m/min. Nož CentroFix Z4 Debelinka Bäuerle tip DM63 za natančno obdelavo debeline masivnega lesa in lesnih materialov. Stroj je primeren za uporabo v mizarskih delavnicah in industrijskih obratih ter omogoča nizkovibracijsko in dimenzijsko natančno skobljanje zaradi masivne konstrukcije. Idealno za enakomerno kalibracijo obdelovancev v serijski in posamični proizvodnji, opremljen z obojestransko rezilno skobeljno gredjo Leitz tipa CentroFix. Bwedpfxsx U Dvfe Afnsi Vključno z originalno gredjo za skobeljne nože za trakove.

Stanje: dober (rabljeno), Unit: REWA chamber filter press, used Type: 470-15-25K-HP Design: side-bar guided Filter plate size: 470 x 470 mm Number of plates: 15 Bodpfx Asqakbrsfnjwi Filter plates: PP Filter cloths: optionally available, tailored to the specific medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (product-contacting parts): Flange, tie rods stainless steel, PP or rubber-lined Material (non-product-contacting parts): Stainless steel Purchase or rental: Inspection of the equipment can be arranged by appointment at our facility. Other information: We supply this unit used, fully functional or refurbished and customized to your requirements. Are you interested in renting or purchasing this unit? Contact us, we are happy to assist you.

Stanje: dober (rabljeno), Z digitalnim prikazom Z vrtalno in rezkalno glavo Hodi 330 x 400 x 475 mm Vpenjalna površina mize 650 x 245 mm Vreteno ISO 40 Bwedpfxew Nnutj Afnei Hitrosti vretena 63–2'800 vrt./min Različna dodatna oprema MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe Bedpstzf N Refx Afnswi - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch Bjdpfsmk Iktsx Afnewi

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics Bsdpfxewg R I Ej Afnjwi These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////