Stroj za tračno žago

Rogi CY300NT

Stanje: novo, lastna masa: 12.900 kg, največja dovoljena obremenitev: 34.100 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.850 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 350 mm, vzmetenje: drugo, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 12.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm in length - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2, and 6x4 Loading Platform: - Low-bed with external beams, extendable “SUPER LOW” design, approx. 6,850 mm in length - Low-bed with fixed hardwood flooring, approx. 40 mm thick, with mechanical locking device Rear Chassis: - Rear chassis with closed outer frame, chequer plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable to the outside - 1 pair of lashing rings recessed in the trough - 2 pairs of stake pockets for insertable stakes 100 x 50 mm in the external frame Pendulum Axle and Tyres: - "PENDULUM AXLE", all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and safety locking pins for securing in raised position - Axles painted with two layers of single-colour 2K paint in “FAY-Grey-34-0260” - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 - TPMS tyre pressure monitoring system according to ECE R 141 Accessories: Fgjdehlz R Sjpfx Abtjc - Preparation for the installation of bolt-on container locators for 1 x 20ft or 1 x 40ft container on the outer girders - 2" king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel - Yellow-red air couplers on the galvanized front connection bar - 4 wheel chocks - Remote steering from front and rear, operable via wired remote control with push buttons, with single-track alignment control - Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings - Electro-hydraulic power unit - White reflective tape in accordance with EU regulations on sides, extension, and rear - European reflective plates (red-yellow) on the rear of the trailer - One bracket on each side of gooseneck and rear plate for warning panels, including socket - 6 pairs of threaded blocks between the lashing rings under the top chord on outer beam for mounting screw-on RUD Rings VLBG-4 - Detachable ALU side boards and rear board on the gooseneck, approx. 2,440 x 400 mm - Rear galvanized insertable stakes are removable (body length approx. 2,560 mm) - Gooseneck rear upper area covered with removable cover - 5 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading area - Folding extensions, approx. 230 mm per side - 2 pairs of bolted RUD Rings VLBG-4 M24 (LC 8,000 daN) - 1 pair of steel ramps for bridging the mounting hooks of the low-bed - Anti-skid sand layer painted on loading surface - 80 km/h speed stickers at rear and both sides - Spoon boom trough at rear chassis closed at rear with plug-in plate - Four extendable warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Radio remote control for rear axle steering in addition to cable remote, with indicator lights on receiver for alignment control - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard NLGI-2 grease - Load pressure gauge for determining axle loads - HRM Metallisation (High Resistance Metallisation) of outer frame - Complete steel structure shot blasted, then all defined visible areas metallized and finished with ZINACOR 850 (zinc 85% - aluminium 15%) hot galvanizing

Stanje: rabljeno, Univerzalni orodjarski rezkalni stroj DECKEL tip FP 1 Serijska št.: 51265 Leto izdelave: cca 1967 Pomiki X: 300 mm Y: 150 mm Z: 340 mm Velikost mize 600 x 200 mm Vpenjanje vretena SK 40 - S20 x 2 Hitrost vretena 40-2000 vrt./min, 16 stopenj Moč motorja 1,0 in 1,6 kW, preklop polova Omrežni priključek 380 V, 50 Hz - Pomik v X in Z osi - Hitrosti vretena prek 2 hitrosti motorja in 8 stopenj v menjalniku - Pomik pinole na vertikalni rezkalni glavi 60 mm - nagibna, vrtljiva in nagibna kotna miza - Črpalka za hladilno sredstvo v podnožju stroja - Prosto stoječa komandna omara Dimenzije DxŠxV 1100 x 1100 x 1600 mm Teža 690 kg V dobrem stanju Fgedpoghtvaefx Abtec

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Fjdpfx Absf Ep Dijtogc Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1955, Drilling capacity in steel St 37 Ø 65 mm Fgjdpfx Abjtwzk Dstjc Drilling capacity in cast iron Ø 75 mm Spindle taper MK 5 Throat depth 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-speed 3.6 / 4.8 kW Clamping area, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Power feed • Forward/reverse operation • Motorized vertical adjustment (up and down) • Wide speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Stanje: rabljeno, Leto izdelave: 1990, Sheet width: 3050 mm Sheet thickness: 12 mm Gap between columns: 3100 mm Table height above floor: 900 mm Adjustable cutting angle: 0.5 - 3° Strokes per minute: 6 - 13 spm Back gauge - adjustable: 1000 mm Hold-downs: 18 units Oil capacity: 350 l Total power requirement: 22.5 kW Fgsdsu Uu Smjpfx Abtec Machine weight approx.: 8 t Machine dimensions (L x W x H): 3.96 x 2.10 x 2.22 m - with adjustable cutting gap - Accessories: electric back gauge, spare blades

Stanje: novo, Leto izdelave: 2026, Horizontal band saw with a swiveling arm for metal cutting, enables cutting in a plane perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. Material feeding can be performed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings, which significantly affects blade guidance, its durability, cut straightness, precision, and cut quality. The saw arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the drive wheel of the cutting blade via a worm gear motor. The blade is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. There is a separate coolant reservoir with an electric pump inside. The descent speed of the arm (cutting speed) is adjusted with a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are selectable: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the blade drive is automatically switched off. Safety is ensured by the blade covers and microswitches that stop the motor after the cutting cycle or upon opening any of the covers; additional protection is provided by the automatic shutoff of the bandsaw in the event of blade breakage. Technical specifications Band saw blade dimensions 2455×27×0.9 mm Fjdpfxsvuf S Nj Abtogc Blade tensioning mechanical (manual) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400 V Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE declaration yes Miter angles 0º ø230 mm 260×150 mm 225×225 mm 45º ø165 mm 180×130 mm 165×165 mm 60º ø105 mm 100×90 mm 110×110 mm *Please note: the device is supplied by default without a CEE connector, as there are many different types. If you would like to receive a connector along with the machine, please contact the seller before purchasing or during the ordering process.

Stanje: novo, Bandsaw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Fgedpfxjga Tzuj Abtec Cutting capacity 90° ----- 270 mm / 260 x 320 mm Cutting capacity 60° ----- 140 mm / 140 x 140 mm Cutting capacity 45° ----- 230 mm / 220 x 220 mm Cutting capacity -45° ---- 200 mm / 220 x 150 mm INCLUDES Bandsaw blade Workpiece stop Base cabinet Manometer for bandsaw blade tension Bandsaw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Automatic end stop

Stanje: novo, Table diameter: 2000 mm Table load capacity: 10,000 kg Swivel range: 0 - 130 degrees Rotational speed: 0.02 - 0.2 rpm Height adjustment: 1450 - 2200 mm Torque at the faceplate: 20,000 Nm Motor power: 1.5 / 2.0 kW Welding current: 1000 amps - Manual height adjustment. Fgjdefv Ay Ispfx Abtsc - Self-locking gearbox, which means minimal overshoot and undershoot even with off-center loads. - Electronic components from Schneider, Siemens, and Delta. - Frequency-controlled, infinitely variable rotational speed of the turntable. - High stability due to robust construction. - CE certificate. The D-HBE series is supplied as standard with a cable remote control and a foot switch.

Stanje: novo, Table diameter: 1200 mm Table load capacity: 3 t Swivel range: 0 - 135 degrees Rotational speed: 0.07 - 0.7 rpm Table height adjustment: from 980 to 1750 mm Torque at faceplate: 4500 Nm Welding current: 700 amperes Features • Self-locking gearbox, no forward or backward movement under eccentric load • Hydraulic height adjustment allows for virtually unlimited positioning options • Electronic quality components from Schneider, Siemens, and Delta Fsdpfx Ajfv Azaobtjgc • Italian hydraulic components • Frequency-controlled, stepless turntable speed • High stability due to heavy and compact construction • CE certificate • Very good price-performance ratio • Supplied as standard version with remote control and dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: novo, Load capacity 20 t Workpiece diameter 150 – 3800 mm Roller diameter 350 x 150 mm Feed rate 100 – 1000 mm/min Total power requirement 2 x 1.1 kW Features - Electronic components by Siemens/Schneider/Delta - Frequency-controlled drive unit speed - Support rollers: steel/rubber - High stability thanks to robust construction - CE certificate - Excellent price-performance ratio - Cable remote control Fgodpfef Ep Dmox Abtsc - Dual foot pedal - 3-year warranty (see warranty terms)