Tračna žaga za kovino

Rogi CY270N

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread Nedpfowki Apjx Adyewb - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Nwsdpfewk D Efox Adyob Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: novo, Machine in stock and immediately available Double mitre metal band saw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Nodpfx Ajd R Sipsdyowb Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor power rating S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre saw with swivelling saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made from stainless steel, steel, etc., for commercial use - Rugged, generously sized cast saw arm for low-vibration operation - Two blade speeds for optimal adjustment to the workpiece - Hydraulic downfeed cylinder - Quick-action vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimum cutting results - CE/IEC compliant, with German documentation and German after-sales service Scope of delivery: - Saw blade - Material stop - Manometer (blade tension) - Carbide blade guides - Vice with quick release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic end cut-off - Base frame

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 Nodpfxenzpx Rj Adyewb -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: novo, Cutting capacity: Round 0°: 170 mm Square 0°: 150 x 150 mm Flat 0°: 150 x 190 mm Round 45°: 125 mm Square 45°: 95 x 120 mm Working height: 870 mm Cutting speeds: 40 / 80 m/min Saw blade: 2080 x 20 x 0.9 mm Coolant pump: 100 W Saw motor: 0.75 kW Connection: 400 V Dimensions (L x W x H), approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow swivels up to 45° - Two saw band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profiles, and solid material made of stainless steel (VA), iron, etc. - Generously dimensioned saw arm for low-vibration operation - Lowering of the saw arm via hydraulic lowering cylinder - Low-noise due to stable construction - Automatic shut-off after cutting via micro end switch - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable saw band guides for optimal cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - Bi-metal saw blade 2080 x 20 x 0.9 mm, 6/10 TPI - Band tension adjustable via pressure gauge - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch Njdpfxoilk H Te Adyowb - Automatic end shut-off after cutting - Base frame

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Center height 180 mm Center distance 1000 mm Max. swing diameter over bed 356 mm Max. swing diameter without bed bridge 506 mm Max. turning diameter over cross slide 220 mm Max. turning length 1000 mm Spindle nose D1-4/DIN55029 Nwsdpsxbz Ebjfx Adysb Spindle bore D38 mm Threads that can be cut: Metric, Whitworth, Module, Spindle speed 45 – 1800 rpm Tailstock taper Morse 3 Tailstock quill stroke 120 mm Motor power 2.4 kW Machine weight 900 kg Machine dimensions 1945 x 785 x 1204 mm Accessories - 3-jaw 160 mm chuck - 4-jaw 200 mm chuck - Face plate D320 mm - 3-axis digital readout system - Electromechanical spindle brake - Fixed and travelling steady rests - Fixed center - Coolant system - Halogen work lamp - Splash guard - Chuck guard - Tool post guard - Tailstock - Manuals Factory new model with 0 operating hours. Powered. Showroom machine.

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Nedpfx Adjt Iklkjyewb Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Največji premer obdelovanca nad ležiščem: 330 mm Največji premer obdelovanca brez mostu ležišča: 476 mm Največji premer obdelovanca nad suportom: 198 mm Višina konic: 165 mm Dolžina struženja: 500 mm Pritrditev vretena: D1-4/DIN55029 Premer izvrtine vretena: 38 mm Možno rezanje navojev: metrični, Whitworth, modul Hitrost vretena: 70 – 2000 obr/min Konus konjička: Morse 3 Moč motorja: 1,1/1,5 kW Teža stroja: 500 kg Dimenzije stroja: 1320 x 610 x 1400 mm Oprema, dodatki - 3-čeljustna vpenjalna glava D160 mm Nwjdpfx Aexb Axcsdyeb - 4-čeljustna vpenjalna glava D200 mm - 4-kratni nosilec orodja - Elektromehanska zavora vretena - So- in prosto stoječa luneta - Hladilni sistem - Halogenska delovna svetilka - Zaščita za vpenjalno glavo - Zaščita proti brizganju - Priročniki Stroj je v tovarniško novem stanju. Delovnih ur: 0. Razstavni stroj.

Stanje: rabljeno, Leto izdelave: 1987, Technical specifications: Swing diameter over bed: 500 mm Swing diameter over cross slide: 280 mm Turning length: 1500 mm Distance between centers: 1500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Spindle speed range: 25–1250 / 32–1600 / 36–1800 rpm, 18 steps Feed rate: 0.05 – 8.5 mm/rev Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 200 mm Total connected load: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions (L x W x H): approx. 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 – 2.8 mm (end position clutch not functional, manual shut-off required) Top slide with 4-way toolpost Steel faceplate Ø 705 mm with offset threaded holes Nedpfeu Ixznex Adyjwb

Stanje: novo, At variable speed, ISO 40. Powered cross table on all axes. 3-axis digital readout included. Base with chip tray. Coolant system. LED lamp. Mechanical speed indicator. Motorized axes with variable speed and rapid traverse. Manual pump guideway lubrication system. Milling capacity with insert cutter: 100 mm. Milling capacity: 35 mm. Drilling capacity in cast iron with pilot hole: 60 mm. Max drilling capacity in steel with pilot hole (S235JR): 24 mm. Spindle taper: ISO 40 DIN 2080. Quill: 86 mm. Spindle travel: 120 mm. Head tilt: +/- 45°. Vertical head rotation: +/- 90°. Head body rotation: +/- 180°. Vertical spindle speed: (2) 60 ÷ 500 | 500 ÷ 3600 rpm. Nodpfx Adoh Im H Ssyewb Motor: 400 V 50 Hz 2.25 kW. Distance between spindle nose and table: 45 – 395 mm. Distance spindle axis – column: 215–450 mm. Table size: 1246 x 230 mm. Longitudinal table travel: 850 mm. Cross table travel: 310 mm. Max load capacity: 400 kg. Dimensions: 1680 x 1500 x 2100 h mm. Net weight: 1000 kg.