Vibracijski podajalnik z linearnim podajalnikom in krmilno enoto, vibracijska posoda, sortirna enota
RNA Rhein-Nadel Automation SRC-N 250-2L + SLL 400-400 + ESK-N80 / ESG 90

Name: RNA Rhein-Nadel Automation SRC-N 250-2L + SLL 400-400 + ESK-N80 / ESG 90
Brand: RNA Rhein-Nadel Automation
Price: 1850 EUR
Availability: InStock

Stalna cena brez DDV

1.850 €

Stanje

Rabljeno

Lokacija

Hessisch Lichtenau Nemčija

Vibracijski podajalnik z linearnim podajalnikom in krmilno enoto, vibracijska posoda, sortirna enota RNA Rhein-Nadel Automation SRC-N 250-2L + SLL 400-400 + ESK-N80 / ESG 90

RNA Rhein-Nadel Automation SRC-N 250-2L + SLL 400-400 + ESK-N80 / ESG 90

Prikaži karto

Podatki o stroju

Opis stroja:: Vibracijski podajalnik z linearnim podajalnikom in krmilno enoto, vibracijska posoda, sortirna enota

Proizvajalec:: RNA Rhein-Nadel Automation

Model:: SRC-N 250-2L + SLL 400-400 + ESK-N80 / ESG 90

Stanje:: rabljeno

Cena in lokacija

Stalna cena brez DDV

1.850 €

Lokacija:: 37235 Hessisch Lichtenau

Klic

Podrobnosti ponudbe

ID ponudbe:: A17477483

Št. reference:: 61857

Nazadnje posodobljeno:: dne 05.02.2026

Opis

Vibratory bowl feeder / Sorting device / Spiral elevator / Vibratory feeder RNA
Vibratory bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology
Feeding system, feeder unit
Manufacturer: RNA Rhein-Nadel Automation GmbH
Type: SRC-N 250-2L
Serial no.: Year: approx. 2000
Bowl diameter bottom: 300 mm
Bowl diameter top: 350 mm
Bowl inner height: approx. 25 mm
Sorting track width: approx. 30 mm
Total height (drive + bowl with sorting track): 380 mm
Oscillation frequency: 100 Hz / 6000 rpm
Power connection: 230 Volt, 50 Hz
- The feeder was used for feeding automotive blade fuses
Space requirements: Ø x H: 420 x 390 mm
Feeder weight: 52 kg

Linear feeder / Vibratory feeder / Sorting device
Manufacturer: RNA Rhein-Nadel Automation GmbH
Type: SLL 400-400
Serial no. 00835 Year: approx. 2000
Maximum rail length: 700 mm
Usable load: approx. 1.5 to 2 kg
Oscillation frequency: 100 Hz / 6000 rpm
Power connection: 220 Volt, 50 Hz
- Oscillation plate L x W x H 400 x 65 x 12 mm
- Mounted rail length 530 mm
- Installation height with oscillation plate 145 mm
Space requirements: L x W x H: 580 x 120 x 400 mm
Linear feeder weight: 20 kg

Control unit for vibratory drives, regulator, controller, control system for vibratory feeder /
sorting device / spiral elevator / vibratory bowl / oscillating feeder
Manufacturer: RNA Rhein-Nadel Automation GmbH
Type: ESK-N80 / ESG 90
Power supply: 0 ... 208 Veff; (230VAC during motor operation) at 230V mains voltage
0 ... 98 Veff; (115VAC during motor operation) at 115V mains voltage
Output voltage: 0...208 V (eff.), adjustable, (230 V mains)
Number of power outputs: 2
Output 1: Bowl feeder, linear feeder max. 10A adjustable
Output 2: Bowl feeder, linear feeder max. 6A adjustable
Nodpsuzn Nnofx Ag Tswc
Total load current: 16 Aeff
Sensor inputs: 1
Number of enable inputs: 1 (24V DC)
Sensor supply: 24V DC, max 60 mA
Sensor delay ON: 0 ... 8 sec.
Sensor delay OFF: 0 ... 8 sec.
Power output connection: Hirschmann 7-pin
- Two power outputs
- Sensor amplifier with independently adjustable time settings (On / Off)
- Soft start (internally adjustable)
- External enable input 24VDC
Space requirements: L x W x H: 260 x 190 x 140 mm
Control unit weight: 3.6 kg

All devices tested and in good condition

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2013

596 Oglasi na spletu

Klic

Pošlji zahtevo

Sporočilo*

Ime*

E-pošta*

Telefon

Podjetje

Poštna številka in mestoDržava

Sem trgovec

Prejmite ponudbe za podobne stroje

Opomba: Vaše povpraševanje bo posredovano vsem prodajalcem v kategoriji strojev. S tem lahko prejmete zelo veliko ponudb.

Izjava o varovanju zasebnosti

Telefon & Faks

+49 5602 ... oglasi

Faks:

Dodaj na seznam priljubljenih

Deli Prijavi oglas

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Linearni pogoni Control Techniques Unimotor / Festo EGC-80-1300-BS-10P-KF-0H-ML-GK

Brieselang

729 km

Linearni pogoni
Control Techniques Unimotor / FestoEGC-80-1300-BS-10P-KF-0H-ML-GK

Klic

Mali oglas

Hidravlična stiskalnica Hidralmac 40 T Einständerpresse

Ennepetal

802 km

Hidravlična stiskalnica
Hidralmac40 T Einständerpresse

Klic

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Nwsdpfofxyhfsx Ag Tsc Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Poglej podrobnosti

Mali oglas

Odmikalo za tovor v pisarni Zambelli Zambelli Ersatzteile Office Cargo Spacer

Nauen

728 km

Odmikalo za tovor v pisarni Zambelli
Zambelli ErsatzteileOffice Cargo Spacer

Klic

Stanje: novo, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternoster and storage lifts as of 31 December 2023. After this date, the company will no longer provide support or spare parts. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these units. Please feel free to contact us at any time. Nsdpjiy Dw Hefx Ag Tjwc

Poglej podrobnosti

Mali oglas

Donaueschingen

531 km

Vibrator
HörmleSRC-N 200 / SRC-N 250

Klic

Mali oglas

Rotacijski sendvič ponvi lovec na fotke Regal 15000

Dn10 4Es

1.392 km

Rotacijski sendvič ponvi lovec na fotke
Regal15000

Klic

Mali oglas

Fincham

1.271 km

Vijačni polž
Stainless steelAuger

Klic

Mali oglas

Dvigalo za transport valjev Mica HUB 1 NEU

Babenhausen

617 km

Dvigalo za transport valjev
MicaHUB 1 NEU

Klic

Leto izdelave: 2026, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2026, Z vozičkom HUB1ROLL za transport valjev lahko dvignete papirne in folijske valje do največje višine 180 cm. Mehanski pogon omogoča gladko, varno in nežno dviganje ter spuščanje valjev. Je popolna rešitev za proizvodnjo in skladišča, ki potrebujejo mobilno in učinkovito napravo za premikanje težkih in obsežnih materialov. Model: Hub-1 Mobilna izvedba iz nerjavečega jekla Teža valja: do 50 kg Dvižna višina: 1800 mm Baterija 350 W / 2 kosa po 12 Ah Čas delovanja cca 8 ur Napetost polnjenja 230 V za akumulator Nova naprava z garancijo + servis rezervnih delov Kakovost strokovnjaka! Izkoristite več kot 35 let izkušenj! Možnosti: Nedpfsw S Slzex Ag Tswc Vzdrževalna pogodba Servisni paket Dostavna služba Uvajanje in zagon Obiščite našo veliko razstavo!

Poglej podrobnosti

Mali oglas

Walkeringham

1.392 km

Vibracijski transporter
NNP

Klic

Mali oglas

Navpični obdelovalni center CHIRON FZ 08K W

Kolbingen

509 km

Navpični obdelovalni center
CHIRONFZ 08K W

Klic

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Na prodaj sta 2 CNC rezkalna stroja Chiron FZ 08K W, letnik 2011, vključno z avtomatiziranim podajalnikom – robotska celica z roko. Nedow Rba Sspfx Ag Tjwc Stroja sta v zelo dobrem stanju, redno servisirana in takoj pripravljena za uporabo. Prepričata s svojo natančnostjo, zanesljivostjo in kompaktno zasnovo – idealni za serijsko proizvodnjo.

Poglej podrobnosti

Mali oglas

Vibracijski podajalnik sklede / naprava za razvrščanje / podajalnik sklede / vibracijski podajalnik, RNA Rhein-Nadel Automation SRC-B200-2R

Hessisch Lichtenau

682 km

Vibracijski podajalnik sklede / naprava za razvrščanje / podajalnik sklede / vibracijski podajalnik,
RNA Rhein-Nadel AutomationSRC-B200-2R

780 €

Stalna cena brez DDV

Klic

Stanje: rabljeno, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Feeder RNA Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screwdriving Technology Feeding System, Feeding Device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter upper: 300 mm Bowl diameter lower: 180 mm Bowl internal height: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - RNA Control Unit, Type ESG 90 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Nwsdpou Ailgjfx Ag Tsc Space requirement Ø x H: 300 x 260 mm Weight: 14 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl by mechanical oscillations and thereby moves the parts.

Poglej podrobnosti

Oglašujte tukaj