Odstranjevalec zamaškov iz zabojev

Rink

Stanje: rabljeno, Leto izdelave: 2012, Overview This returnable bottle screw cap remover, model RINK KM 690/4K, manufactured in January 2012, is designed for the automatic removal of screw caps from returnable bottles directly inside crates. The unit is installed in the empty-container feed section and removes the screw closures before the bottles are conveyed to the bottle washer. The machine is equipped with 4 units, each featuring 4 x 3 unscrewing heads, allowing several bottles to be processed in parallel within the crate. In operation, the crates are continuously conveyed beneath the unscrewing sections. The head units are lowered onto the bottles in a stepwise fashion, unscrew the caps, and then return to the upper starting position. The machine is operated via a Siemens SIMATIC panel touch display integrated into the stainless steel control cabinet. Hnedpfx Abszcgppjxon Technical Data Manufacturer: RINK GmbH & Co. KG Machine Type: Returnable Bottle Unscrewing Machine Model/Type: KM 690/4K Year of Manufacture: 01/2012 Application: Unscrewing/removing screw caps from returnable bottles in crates Features: 4 units, each with 4 x 3 unscrewing heads Operation: Automatic crate transport beneath cyclically lowering unscrewing units HMI/Control: Siemens SIMATIC panel touch display Signal Tower: Red/orange/green status light Safety: Stainless steel housing with transparent sliding doors and safety warning labels Power supply: 230/400 V, 50 Hz Connected load: 18 kVA Current: 25 A Condition: Used, installed in an industrial returnable bottle plant

Stanje: rabljeno, Leto izdelave: 2016, Overview The case unscrewer was completely refurbished in 2016 by Hormes. Previously, the machine was used in a German mineral water plant and can be seen in operation until May 2025. Technical Specifications: - Capacity: approx. 2,800 crates/hour - Formats: 0.7 L GDB in 12-bottle crates, 0.5 L GDB in 12-bottle crates - Crate dimensions: - 356 x 275 x 257 mm (0.5 L GDB) - 356 x 275 x 346 mm (0.7 L GDB) Hnodpfowigy Njx Abxon - Electrical control: Siemens S7 controller Closures Suitable for unscrewing aluminum and plastic closures, 28 mm

Stanje: rabljeno, Leto izdelave: 2017, Odsrajevalec / Odpirač, proizvajalec Rink, tip: KM 790/2K E LL, odsrajevalec/odvijač za zaboje, 2-glavi za navojne pokrovčke 0,5 l NRW v 20-delni modularni zaboji, z eno-glavo ploščo za odpiranje, letnik 2017. Hodpjy Iz Aiefx Abxsnn

Stanje: rabljeno, Leto izdelave: 2020, Overview This automatic screw cap remover (screwdriver) from RINK was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before they enter the bottle washing process. The machine was installed in a returnable glass bottling plant with a capacity of approx. 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure bottles enter the cleaning process without caps. The machine is configured for 0.75-liter GDB bottles in 12-bottle crates and includes format parts for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The unit includes a closure discharge system and a blower unit for removing caps from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic Screw Cap Remover (Descrewder) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: Approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles prior to bottle washing Bottle format: 0.75-l GDB bottle (height approx. 295 mm) Crate formats: • 12-bottle pool N2 crate (400 × 266 × 333 mm) • 12-bottle single crate (395 × 295 × 355 mm) Crate transport: Cross-flow crate transport Infeed direction: Left → Right Conveyor height: approx. 700 mm (max. 750 mm adjustable) Dimensions: • Length: 2,700 mm • Width: 1,400 mm • Height: 2,950 mm Weight: Approx. 3,000 kg Electrical equipment: • Danfoss frequency inverter • Standard electrical equipment Additional features: • Cap transport system • Blower unit Technical documentation available Condition: Used Availability: On request Hnjdeytphcspfx Abxen

Leto izdelave: 2026, stanje: novo, A modular system that you can easily adapt to your requirements: * Mechanical or electric mill * Rack-and-cloth press or basket press * Fruit presses in various sizes: 5 to 70 liters All home cideries offer: * Maximum juice yield thanks to hydraulic technology * Ergonomic and hygienic operation * Compact unit with mobile chassis Hodpsuady Defx Abxjnn RINK – Home Cideries – tailored to your needs: * The Standard Home Cidery includes a manual fruit mill and enables an hourly output of up to approx. 70 liters. * The Super Home Cidery includes a RINK grating mill and enables an hourly output of up to approx. 150 liters.

Leto izdelave: 2026, stanje: novo, Flow Pasteurizer Electric with Preheating of Juice in Coaxial Tube Heat Exchanger You utilize existing low-cost energy sources (e.g., solar, heat pump, biogas, etc.) even if the temperature level is insufficient for pasteurization. The remaining temperature increase to the required pasteurization level is achieved electrically (with lower energy demand). Components: Preheating: * Coaxial tube heat exchanger (KRWT) with thermal insulation (up to 60kW) thermal * Mixing unit incl. circulation pump ensures stable inlet temperature of heating water Hnedpfx Aouadm Djbxsn Flow Pasteurizer Electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW – 400 V * Stainless steel tank 150 ltr. with thermal insulation and stainless steel tube heat exchanger * Automatic under-temperature protection (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Easy operation Total capacity up to 1,100 liters per hour ##### RINK – Pasteurization systems for over 30 years Proven technology – over 500 units in customer operation

Stanje: novo, Leto izdelave: 2026, Bag in Box Dosing Machine EF 600-NG – for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing * User-friendly display with key information (current flow rate, remaining quantity, etc.) Hnjdpfx Abjt U Iiyexon * Pre-set quantities: 1.5, 3, 5, 10, 20 liters * Freely adjustable quantities * Cleaning program * Comprehensive statistics * Minimal downtime thanks to double holder system * Compact design

Stanje: novo, Leto izdelave: 2026, 150 ltr. insulated tank with 13.5 kW / 400 V heater featuring automatic temperature cut-off, frame, and bag-in-box filling unit with bag holder * Simple, safe, excellent value for money Hsdpfxst U H Nrs Abxenn * No temperature fluctuations * Exceptionally gentle heating thanks to large heating surface (0.4 m²) * With thermostat: switches off at set temperature * Height-adjustable stainless steel frame – tank drains completely "Leisure time" during heat-up: approx. 40 min for 150 ltr. Hourly output approx. 150 ltr. Also available with 18 kW / 400 V heater – hourly output 180 ltr. Two-station bottle filling available No 400V connection available? Tank pasteurizer is also available with gas-fired condensing boiler. ##### RINK – pasteurization systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Continuous Pasteuriser Electric – up to 400 l/h * Water bath vessel Hnjdpfxjt Uzito Abxon * Electric heating 13.5 / 18 / 27 / 31.5 kW – 400 V * Tank (stainless steel), 150 l, with thermal insulation * Tube heat exchanger, stainless steel * Automatic low-temperature safety cut-out (compressed air required) * Juice pump, stainless steel * Chassis with mountings for low-temperature cut-out and pump ##### RINK – Pasteurising systems for over 30 years Proven technology – more than 500 units in customer use

Leto izdelave: 2026, stanje: novo, Coaxial Tube Heat Exchanger for Connection to Existing Heating System / Heat Source * Coaxial tube heat exchanger (CTHE) with thermal insulation * Automatic low-temperature safety device * Stainless steel juice pump * Chassis Advantages: * Low maintenance * Suitable for media containing suspended solids * Simple, quick cleaning * Durable due to use of high-quality, robust components Optional: Mixing unit incl. circulation pump for stable inlet temperature of heating water ##### Hnodpfet Uzhcsx Abxen RINK – Pasteurization systems for over 30 years Proven technology – more than 500 units in customer operation