Kotel Riello RTQ 1000

Riello RTQ 1000 Riello RTQ 1000

Stanje: novo, High-performance cutting and splitting machine with 20 tons splitting force – Brugger SA48 Pro! The Brugger SA48 Pro cutting and splitting machine is the perfect solution for the fast and effortless processing of logs with a diameter of up to 48 cm into high-quality firewood. Thanks to its well-designed yet simple construction, this machine stands out by requiring minimal maintenance and making repairs straightforward. This impressive device is available with either a powerful 14 HP Kohler petrol engine, a 9.5 kW 400V electric motor, or PTO drive for three-point linkage operation. The SA48 Pro dispenses with electronic controls and is operated purely mechanically using components such as hydraulic valves with levers. Specifications: - Maximum cutting length: 55 cm - Maximum log diameter: 48 cm - Splitting force: 20 tons - 55 cm chainsaw bar - Extra-wide 3.2 m conveyor belt - Hydraulic feed up to the chainsaw - Pivoting conveyor belt - Automatic chain lubrication Despite its high splitting force and large diameter capacity, the machine remains relatively compact. Equipped with a drawbar, it can be attached to any towing hitch for easy transport. Additionally, two people can move the machine by hand on a flat surface without always needing a vehicle. The log length can be continuously adjusted up to 55 cm. The splitting wedge can be moved up or down to different positions via a manual lever, allowing you to split logs in 2-way, 4-way, or even 6-way configurations depending on the wood thickness. Optional equipment such as the log lifter or chain conveyor further simplify the work process. Multiple logs can be loaded onto the chain conveyor using a forklift, crane, or front loader, eliminating the need to lift individual logs by hand. The SA27 Pro has been replaced by the improved SA48 Pro model. Pricing: Brugger SA48 Pro cutting and splitting machine: €9,749 6-way splitting knife: €199 Ihjdpfepz I Ncex Af Tet 8-way splitting knife: €299 Additional PTO drive (for electric or petrol versions): €949 Log lifter: €1,498 Chain conveyor: €1,898

Stanje: dober (rabljeno), Leto izdelave: 1991, maximum planing width 520 mm maximum planing height 200 mm Ihedpfjiwi Ezex Af Tot 4-knife cutterblock slotted table lips electric height adjustment with mobility kit with knife setting gauge

Stanje: dober (rabljeno), Weishaupt RL30/2A version EM oil throughput 195 kg/h Ihjdpfx Ajig Tw Ejf Tot

Leto izdelave: 1992, Stanje: rabljeno, Plate heat exchanger for milk processing Ihedsh Eulgspfx Af Tet

Stanje: zelo dobro (rabljeno), Buderus Logano SK735 - 830 kW, 6 bar Betriebsdruck, auch mit 1200 und 1400 kW erhältlich Ihodpfx Aohtf Dksf Tjt

Stanje: zelo dobro (rabljeno), Kotel Buderus SB 625 -185kw Ihjdou I Rx Sjpfx Af Tot

Stanje: zelo dobro (rabljeno), Volt: 220–240 VAC // Current: 1.8 A // Frequency: 50/60 Hz // Phase: 1 // Power: 0.4 kW WITH OUTFEED CONVEYOR Diverter Belts: For envelope format 10.5 x 14.8 cm and for portrait orientation, the diverter belts should be pushed toward the central transport belt. Ijdpfxoh Eibaj Af Tsht Rule: For large envelopes, push the diverter belts outward; for small envelopes, push the diverter belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ FEEDER does not require synchronization. Position the feeder using the handles into the printing machine, and set the required height with the hand crank. Important: Only after setting the printing height should you lock the rear rollers and check the stability. Switch on the machine and commence printing. For single-sheet feeder printing machines (GTO): adjustable tilt. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 printing machines, regardless of feeder system (overlapping / single-sheet feed). – Does not require mechanical modifications to the press – No synchronization adjustments required due to laser technology – Very short setup time enables economical operation from just 1,000 envelopes – Simple operation – The feeder’s design ensures forced overlapping. The throughput of the Stenz Feeder is therefore unrestricted – Minimal wear parts for extremely long service life – Already certified for use in thousands of different printing machines – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Stanje: dober (rabljeno), UV curing oven for coating line Ihsdot Ag Uqjpfx Af Tet

Stanje: rabljeno, Leto izdelave: 2004, MORI SEIKI MT 2000 SZ Dreh-Fräs-Zentrum HERSTELLER: MORI SEIKI MODELL: MT 2000 BAUJAHR: 2004 STEUERUNG: MSG 501 SCHWENKDIAMETER ÜBER QUERSCHLITTEN: 599,5 mm SCHWENKDIAMETER: 749,0 mm FUTTERGRÖSSE: 250,0 mm SPITZENWEITE: 1280,0 mm MAX. BEARBEITUNGSDURCHMESSER: 548,6 mm MAX. BEARBEITUNGSLÄNGE: 1018,0 mm STANGENDURCHLASS: 63,5 mm C-ACHSE: 0,001° SPINDELDREHZAHL: 4500 U/min SPINDELMOTOR: 20 PS SPINDELANSCHLUSS: A2-6 ZWEITSPINDEL STANGENDURCHLASS: 43,18 mm ZWEITSPINDEL MOTOR: 10 PS ZWEITSPINDEL DREHZAHL: 6000 U/min WERKZEUGWECHSLER-KAPAZITÄT: 60 Positionen REVOLVER: 12 Stationen B-ACHSEN-WEG: +/- 120° Y-ACHSE: +/- 78,7 mm AUSSTATTUNG: - CNC-Stangenlader - Teileförderer - Werkzeugvermessungsfühler - Y-Achse Ihodpfx Aouq Iwpjf Tot - Hochdruckanlage - Späneförderer - Vollständiger Satz an Handbüchern - Umfangreiche Werkzeugausstattung

Stanje: dober (rabljeno), Riello oil burner 482M1, output 2370 kW, 220 kg/h Isdpfxepir Rys Af Tsht