Ekstrakcija

RIEDEL Absauganlage mit Zellradschleu

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 375,1 kW (509,99 KM), konfiguracija osi: 4x4, gorivo: dizel, emisijski razred: Euro 6, Leto izdelave: 2025, Oprema: airbag, dodatne luči, parkirni grelec, spojka prikolice, From our range of new vehicles, we offer you: TLF 3000 All-wheel drive on an off-road MAN TGM 13.290 all-wheel chassis Ideally suited for small and medium-sized fire departments in rural areas, seeking a compact and robust vehicle to handle diverse tasks while requiring a large water reserve. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with same track width for maximum off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • 4 standard breathing apparatus holders in crew compartment Body: • Premium frame construction made of stainless, corrosion-resistant materials • Folding steps for each side equipment compartment • Custom stainless steel equipment mounts configured to your requirements • Walkable, anti-slip vehicle roof Vehicle pump/extinguishing agent tank: Hjdpfx Ajxyunajgxel • Maintenance-free combined normal/high-pressure pump FPN 2000-10 • PUMP&ROLL capable • Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating system in the pump compartment Firefighting equipment: • High-pressure rapid intervention system with 50 m rigid hose • Foam/water monitor with 2,000 l/min output mounted on roof • Self-protection system with 4 extinguishing nozzles in front of wheels Safety and lighting: • LED roof bar / 2 LED front flashers • Pneumatic Martin-Horn special signalling system • 100 W PA system with loudspeaker unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on body and additional spotlights • Pneumatic LED lighting mast with remote control • Hygiene station on request We would be pleased to provide you with a detailed quotation and present the vehicle to you at our facility in Berlin. All details to the best of our knowledge and belief, without guarantee for completeness or accuracy. This listing does not constitute an offer but is for informational purposes only. Subject to prior sale!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Hedpfx Agoh Ek Daexjl Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KALLFASS ovijanje s folijo s skrčljivim tunelom Naprava je sestavljena iz: 1) Kallfass Universa 8060/200 ovijalni/svarilni stroj za folijo 2) Compact 650SO skrčljivi tunel 3) Odtokovni transportni sistem (doplačilo) 4) Naprava za shranjevanje zapakiranih paketov (doplačilo) Blago, ki ga je treba zapakirati, je zavarjeno v polovično cev iz folije v Inversi in nato skrčeno v skrčljivem tunelu Compact, nato pa preko transportnega sistema prepeljano v skladišče paketov. Dodatne tehnične informacije => slike Prosimo, pišite na e-naslov ali pokličite Hsdpfxswcnqcs Agxjl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, barva: zelen, prostornina tovornega prostora: 48 m³, širina tovornega prostora: 2.400 mm, dolžina tovornega prostora: 7.600 mm, višina nakladalnega prostora: 2.700 mm, Rabljen kotalni zabojnik s krilnimi vrati, zelen, 7,6 m, 48 m³, cena 3.000 € neto Rabljen kotalni zabojnik s krilnimi vrati, moder, 6,5 m, 35 m³, cena 2.750 € neto Rabljen kotalni zabojnik s krilnimi vrati, 5,5 m, 10 m³, cena 1.300 € neto, vrata v slabem stanju Rabljeni kotalni zabojniki s krilnimi vrati, zeleni, 5,5 m, 22 m³, cena na kos 1.500 € neto, potrebni manjši popravili Na voljo so tudi drugi zabojniki. Hjdpfxox Edaps Agxol Nemški zabojniki Nakladanje možno z viličarjem Prodaja samo podjetjem in brez kakršnekoli garancije.

Stanje: novo, Leto izdelave: 2025, PRO version of the shrink tunnel for high-speed processing of products in POF film. Can be combined with the AMTEC Shrinker SPEEDshrink W40L (vertical) PRO version and AMTEC Shrinker SIDEshrink W60XL PRO version. Features double air circulation and adjustable airflow, suitable for large products and/or high-speed packaging (recommended for use with SIDEshrink and FLOWshrink machines). - Specifications: Max. product dimensions: L(unlimited)xW400xH300; tunnel size: L1700xW450xH350; machine dimensions: L2200xW1000xH1230mm; power consumption: 380V, 15kW. Please note that our new machine prices are often lower than standard used equipment prices. Feel free to contact us and let us know your packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are available with a full warranty. Hodpfx Agov Nl Uysxel

Leto izdelave: 2022, stanje: pripravljen za uporabo (rabljen), skupna širina: 2.400 mm, skupna višina: 10.000 mm, največja dolžina izdelka: 2.400 mm, Odsesovalna naprava iz leta 2022. SCHUKO Solo-160-2323/30/182/BD dosega impresiven pretok zraka pribl. 15.500 m³/h, namenjen obdelavi suhih plastičnih ostružkov. Skupna filtrirna površina znaša 182 m², premer filtrirne cevi je 160 mm. Če iščete visokokakovostno odsesovalno napravo, priporočamo, da razmislite o stroju SCHUKO Solo-160-2323/30/182/BD, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Stanje: neoskrbovano - brez garancije • Pretok zraka: cca 15.500 m³/h • Vrsta prahu: plastični ostružki (suhi) • Premer filtrirne cevi: 160 mm • Dolžina filtrirne cevi: 3.000 mm Hedpfx Ajy Dgfzegxel • Skupna filtrirna površina: 182 m² • Moč rotacijskega zasuna: 0,75 kW