Pranje s podtlakom

REK Fluid cleaner 500

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Without cables and control cabinet. Bedpfsh Dwr Uex Afnowi Supplement to the measurement report!

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Bwodpfxowuz E Rs Afnoi Working units: 9 pcs

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stroj za pakiranje Bwsdpswpx Uxjfx Afnsi

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: Bwsdeiu Smbjpfx Afnei 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: novo, Table diameter: 900 mm Table load capacity: 1 t Swivel range: 0–135 degrees Bwodpfx Aegvkikofnsi Eccentricity: 200 mm Table rotation speed: 0.12 – 1.2 rpm Torque: 2000 Nm Total power requirement: 0.75 kW Space requirement approx. 1.5 x 1.02 x 0.9 m The D-HB series rotary tilt tables feature a heavy-duty design for exceptional stability, making them particularly suitable for heavy and precise positioning tasks as well as rotary welding operations. Features: - Easy installation - Increased productivity - Improved weld quality due to optimal positioning and speed control - Reduced crane hours and handling times while enhancing workplace safety - Self-locking gearbox prevents overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled turntable speed - High stability through robust construction - CE certification - The D-HB series includes a remote control with foot pedal for left-right / start-stop operations.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Max. diameter: 32 mm - Spindle speed: 6,300 rpm - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 1.2: X and Z axes CNC controlled - Slide unit 2.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled Bwjdpfxsuhavde Afnei - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled with counter spindle - Slide unit 6.2: X and Z axes CNC controlled EQUIPMENT - CNC Siemens 840D - Counter spindle - Dual operator console - Dual NCU - Bar feeder: IEMCA SIR MS32 F - Coolant tank: KNOLL * with high-pressure pump - Chip conveyor: KNOLL - Cooling unit: Riedel WTS 030.02-NE - Discharge system with 2 CNC axes - Fire extinguishing system: KRAFT UND BAUER *Note: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer.

Leto izdelave: 2026, Stanje: novo, Zaprtospreminjajoči vibracijski sejalniki z čiščenjem s tolkalnimi kroglicami in od zadaj preprosto zamenljivimi sejami. Primerni za sejanje vseh vrst praškastih, zrnastih in granulatnih materialov v suhem stanju. Velikosti: širine 500–1500 mm / dolžine 1200–2400 mm. Sejalne plasti: 2–4 plasti, zrnavost prosto izbirna 0,1–18 mm. Izdelujemo različne velikosti in tipe. Za pripravo ponudbe potrebujemo naslednje podatke: 1. Kateri material želite sejati? 2. Velikost zrn. 3. Nasipna gostota kg/l. Bwodpfx Afochb Ryjnsi

Stanje: rabljeno, ELECTRONIC GENERATOR AF CAVALLO MOD. GAF 20KW – USED - dual output Bsdpfjt U Itfex Afnowi - equipped with ITL 12-1 triode

Stanje: dober (rabljeno), Kód: 0253 Značka: LARI E LARI - ITÁLIE Model: FR 20 - TA - CE Standard Obráběcí centrum pro frézování a vrtání dřeva, plastů a kompozitních materiálů, dřevěných dveří, okenních rámů – standard CE Technické údaje: Pojezd v ose X: 3250 mm Pojezd v ose Y s frézou 90°: 130 mm Pojezd v ose Z s frézou 0°: 290 mm Pojezd v ose Z s frézou 90°: 175 mm Bwedpfxjx A Hdxo Afnsi Pracovní rychlost v ose X: 40 m/min Pracovní rychlost v ose Y: 30 m/min Pracovní rychlost v ose Z: 30 m/min Jednotka pro vrtání a vkládání závěsů: Typ: samčí/samice Regulace otáček frekvenčním měničem Sonda Upínací pouzdro ER 25 Výkon vřetene pro vrtání pantů anuba: 2,2 kW Nastavení sklonu vřetene pro vrtání pantů anuba: -10° až +90° Frézovací elektrovřeteno: Výkon: 2,7 HP při 18 000 ot./min Upínací kleština ER 32 Plynulá regulace otáček frekvenčním měničem Nastavení sklonu od 0° do 90° pro svislé i vodorovné obrábění Řídící počítač: CNC – operační systém Windows XP – barevný monitor – alfanumerická klávesnice – USB port – interpolace Pracovní stůl se 3 posuvnými upínači pro fixaci obrobků Instalovaný příkon: 12 kW Průměr odsávacího hrdla: 120 mm Stlačený vzduch: 7–8 bar Rozměry pro přepravu: 4100 × 1500 × 2100 mm (výška) Hmotnost stroje: 1400 kg Hmotnost rozvaděče: 250 kg

Stanje: rabljeno, Leto izdelave: 1995, Clamping force: 2200 kN Clamping platen: 755 x 755 mm Tie bar distance: 500 x 500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Casting force: 130 kN Casting stroke: 175 mm Plunger diameter: 70, 80, 90 mm Casting volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Bwjdpfx Aovxlufjfnsi Corresponding parting surface: 656, 846, 1078 cm² Ejector stroke (decompression): 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon request. Manufacturer recommends a general overhaul at their overhaul facility. The scope of overhaul can be arranged as required.