Spotting press

REIS TUS 90 OK-40

Stanje: dober (rabljeno), Leto izdelave: 1989, Distance between uprights: 930 mm Installation height: 1035 mm Table length: 1280 mm Ram stroke: 1100 mm Approach speed: 50 mm/min Bjdpfowq Rm Aox Aadsdk Working speed: 10 mm/min Return speed: 34 mm/min Table rotation: 270 rpm Length: 2100 mm Width: 3600 mm Height: 3600 mm Weight: 8000 kg

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Clamping Force: 220 tonnes Year of Manufacture: 2004 Platen Size (W x H): 860 x 830 mm Screw Diameter: 55 mm (618 cm³) Bdedpfxopdrpzs Aadjk Control System: CC 200 Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Stanje: dober (rabljeno), Leto izdelave: 1986, Pressing force: 400 kN Table size: 900 x 1,280 mm Ram size: 900 x 1,200 mm Mould weight: max. 7,000 kg Hydraulic motor power: 7.5 kW Stroke: 1,000 mm Other features: - Mobile die table Bedpfjthdbnex Aadsdk - Tilting table Weight: approx. 7,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pressing force: 320 t Sheet thickness: 0 mm Stroke rate: 80 strokes/min Total pressing force: 320 t Stroke: 30 – 80 mm Clamping surface (lower table): 630 x 740 mm Clamping surface (upper table): 630 x 630 mm Total power requirement: 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in an as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Bdjdpfx Aovwgl Nsadok Lower table width: 630 mm Lower table depth: 740 mm Upper table width: 630 mm Upper table depth: 630 mm Max. daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 25.000 h, vpenjalna sila: 110 kN, premer vijaka: 35 mm, razmak između stupova: 510.460 mm, minimalna višina orodja: 150.450 mm, pritisk: 2.400 letvica, moč: 6,6 kW (8,97 KM), Year: 2017 Control type: CC300 Operating hours: 25,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Screw diameter: 35 mm Screw length: 20D Capacity (cm³): 168 Max pressure (bar): 2400 Clamping force: 110 T Opening stroke: 400 mm Tie bar distance (W x D): 510 mm x 460 mm Platen dimensions: 730 mm x 680 mm Minimum/maximum mould height: 150/450 mm Maximum distance between platens: 850 mm Motor power: 6.6 kW Heating power: 4 kW Clamping unit weight: 6.6 T Length: 5.10 m Width: 1.60 m Height: 2.20 m Bdjdpfx Aasvrdttodjk Cores: NO Robot interface: YES Bi-metallic screw: YES

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, številka stroja/vozila: 4293, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance from worktable to ram plate): 1200 mm Number of cylinders: 1 pc Stroke length: 1200 mm Table height above floor: 700 mm Table extendable: 1200 mm Table travel speed: 25 mm/sec Table tiltable: 45 degrees Max. table load: 5 t Upper tool foldable: 170 degrees Clearance between columns: 1250 x 1000 mm Max. rapid approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Bjdpfxedxrqxj Aadedk Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating fluids): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45), surface induction-hardened and chrome-plated. Control system operation: The linear scale continuously reports the ram position to the control system. The travel path, upper stop position, and switching point—where the press changes from rapid traverse to working speed—as well as the target end position can be set quickly and easily using the monitor control panel. The working speed can be set from 0 to 10 mm/sec in 1 mm increments and from 10 to 155 mm/sec in 10 mm increments. The control system monitors the safety zones, the entire hydraulic system, and the pump, and is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm for reduced travel distances. Scope of delivery includes: Manuals and operating instructions for the motors, pumps, and the press itself CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC Hydraulic Presses

Stanje: rabljeno, Description: Bdedpfx Aowx T Ufoadok General: Table dimensions: 1,500 x 1,000 mm Max. clamping force: 500 kN Max. load capacity of upper plate: 2,500 kg Max. load capacity under plate: 7,000 kg RG version: plate extendable and tiltable Repeat accuracy: +/- 0.04 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Machine weight approx.: 9 t Required space approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Stroke length: 1200 mm Installation height: Table/Ram at Top: 1200 mm Table height: 700 mm Table extendable: up to 1200 mm Table tiltable: up to 45 degrees Upper tool foldable: up to 170 degrees Distance between columns: 1250 x 1000 mm Max. table load: 5 t Table travel speed: 25 mm/sec Approach speed: 95 mm/sec Bedpfjffamqex Aadjdk Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously reports the ram position to the control system. The travel path, upper stop point, switching point (where the press changes from fast approach to working speed), and the target end position can be easily and quickly entered via the monitor control system. The working speed can be adjusted in increments of 1 mm/sec from 5 to 10 mm and in increments of 10 mm from 10 to 95 mm. The control system monitors the safety zones, the entire hydraulics, and the pump. The control cabinet is housed in a separate control enclosure.

Stanje: novo, Dimensions (LxWxH): 1980 x 1480 x 800 Width: 1480 mm Bdjdpfx Aasgrz Thsdsk Length: 1980 mm Approx. weight: 440 kg The SMT fix series welding and assembly tables are robust, everyday workstations designed for processing heavy workpieces, handling electrically powered tools, or working with chemical or oily substances. The solid steel worktop, up to 20 mm thick, can easily withstand heavy impacts or blows—such as those often encountered when working with heavy hand tools or handling extremely heavy metal components—without sustaining lasting deformations or indentations. The metallic worktop allows for unrestricted use of magnetic clamps to fix components in place. Thanks to its substantial own weight, this universally applicable table provides sufficient stability against tipping, even at a working height of 800 mm, when supporting heavy items or tools. The following table (Table 3) provides an overview of the available standard models. For accessories and further information, please follow this link:

Stanje: rabljeno, Leto izdelave: 2002, Technical details: Operating voltage: 400 / 460 V Bdsdpfx Aju N Alysadek Cooling capacity: 5.6 kW Machine dimensions approx. LxWxH: 0.6 x 0.6 x 1.0 m Total weight approx.: 150 kg Fresh air intake at the front: 540 x 400 mm; exhaust air via ceiling Ø 360 mm Compressor: MANeurop MTZ 40JH4 AUE Refrigerant: R 134 a; cooling capacity 5.6 kW Water circuit: Pump type WIOL MHI 202-1/V/3 Next maintenance due: 03/2024