UMENJA

Reiden R 200

Stanje: dober (rabljeno), Swing diameter over bed 425 mm Distance between centers 1500 mm Spindle speeds 36-2240 rpm Various accessories Bledpshz D Euefx Afqer MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Four-jaw chuck, make Roto Record Bledpfxsg Rxh Ie Afqer Model DHK 315 x 4 Short taper size 8 Taper diameter 139.735 mm Bolt circle diameter 171.4 mm Diameter 315 mm Jaws individually adjustable

Stanje: zelo dobro (rabljeno), Accessories available. Centre height: 200 mm Centre distance: 1500 mm Swing diameter: Over cross slide: 235 mm Over bed: 425 mm Over gap: 470 mm Infinitely variable spindle speed: 45 – 2240 rpm Bedpfx Afofkn S Rjqelr Spindle bore: 45 mm Tailstock quill diameter: 55 mm Morse taper of spindle and tailstock: MT 4

Stanje: rabljeno, Saimp KS lathe for metal. Max workpiece length: 1000 mm Bodpfx Aev Sth Hefqolr

Stanje: rabljeno, TECHNICAL DATA - Max. swing over bed: 270 mm - Max. swing over cross slide: 130 mm - Distance between centers: 440 mm - Spindle nose: CAMLOCK D1-3' - Max. bar capacity: 28 mm - Power: 7.5 kW - Spindle speed: 0–5000 rpm, infinitely variable - Travel X x Z: 180 x 400 mm - Working feed rates: 0–5000 mm/min, infinitely variable - Rapid traverse: 7500 mm/min - Power supply: 3-phase 380V 50Hz 14kW - Dimensions: 1700 x 1226 x 1660 mm Bledeuhcarepfx Afqjr - Weight: 1415 kg EQUIPMENT - FANUC 20-T CNC control - Multifix 'A' quick-change tool turret - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump

Leto izdelave: 1994, Stanje: dober (rabljeno), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Equipped with belt filter system - Equipped with coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Machine is in good condition and fully operational; it can be inspected and tested under power on site. Shipping also possible abroad. Inspection: Bedpfx Aek Ixl Asfqjlr Please note that, to avoid any misunderstandings, the item can and should be inspected and tested under power prior to purchase. Please ask any questions before purchase to avoid uncertainties. For general enquiries or to arrange an inspection appointment, I am available anytime via the phone number listed below or above. Subject to prior sale and errors in description. VAT will be itemized separately on my invoices. Shipping via freight forwarder.

Stanje: novo, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.8 t Dimensions L x W x H: 3.0 x 2.15 x 2.2 m SPECIAL PRICE!!!! 2-column high-performance band saw machines of the SBS series The SBS series stands out thanks to advanced technology, high quality, durability, Bljdpfjfg E Hwsx Afqjr and an unrivalled, extensively equipped standard specification. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Operation buttons with pictograms - Work light - Driven chip brush - Hydraulic blade tensioning - Clamping pressure regulation - Double vice (in front of and behind the blade) - Creep mode for positioning - Bundle clamping prepared for electric and hydraulic operation - Chip conveyor The SNC 20 control enables convenient and simple programming of up to 20 different sawing tasks (length and quantity). When entering the nominal dimension, the control system automatically calculates the cutting waste and number of feed strokes. Additionally, the error code display system allows for rapid troubleshooting and diagnostics.

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Bsdjd Hl Stspfx Afqjlr Power supply: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stanje: novo, Thread Diameter: M6 - M24 mm Bjdpeg N Nl Dofx Afqolr Speed: 200 rpm Radius: 1200 mm Adjustable Angle: 0 - 90 degrees Machine Weight: approx. 0.4 t Required Space: approx. 1.4 x 0.1 x 0.7 m Electric Tapping Machine / 4450124SET Fast and precise threading with a freely positionable swing arm - Machine head swivels from 0 to 90 degrees - Quick-change chuck with slip clutch for safe threading with no risk of breakage - Forward/reverse operation selectable on the machine head - Thread size, speed, pitch, and thread depth adjustable via touchscreen on the swing arm - Manual mode: once the preset thread depth is reached, the spindle stops automatically; forward and reverse must be manually activated - Automatic mode: after reaching the preset thread depth, the machine automatically switches from forward to reverse – ideal for tapping multiple blind holes Includes one each of thread tapping chucks GT24: M6, M8, M10, M12, M14, M16, M18, M20, M22-24 Base frame: 900 x 600 x 875 mm

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Blsdpfx Afjfww Sqeqsr Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling You are welcome to inspect the desired system at any time in our production/demo hall. Do not hesitate to contact us for more information. Plantec Maschinen GmbH