Stroji za zlaganje in razstavljanje

RBO Advantage SC

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° Hfjdedfgg Iopfx Afqsh G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Hedotwba Sjpfx Afqjfh Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table

Stanje: zelo dobro (rabljeno), BRIDGE LOADER with DOUBLE LOADING STATION Vacuum system (with pump) No. 4 Vertical support columns for the upper crossbeam No. 1 Upper horizontal crossbeam (for movement of the mobile carriage) No. 1 Motorized mobile carriage connected to horizontal arms No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table for supplying panels to the Unloader, also equipped with several motorized cross conveyors (at 90°). Dimensions approx. 7232 mm Hodpfxod Rg Dpj Afqefh Separate electrical and control panel OMRON electronic control Perimeter metal safety and protection fences Working capacity (cycles/minute): approx. 16 - 20 Min/max panel thickness: approx. 10 - 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Stanje: skoraj kot novo (rabljeno), Inline folie-sealer en krimptunnel Merk: Kallfass Hfsdpfx Aog D Nv Tsfqsh Type: semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Doorvoerbreedte x Doorvoerhoogte: 1600 (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V + N + E, 65 kW Staat: In de huidige staat, werkend

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DE-STACKING STATION - Upper crossbeam horizontally movable by 180° - Support table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Front safety guard, movable Hodpfod Tyvxox Afqsfh - Separate control cabinet and operator panel - External roller conveyor for stack of plates from destacking - External powered roller conveyor from destacking, also with belt drive for 90° transfer of plates - Working capacity (cycles / min): 12-15 - Plate thickness (min/max) mm: 10 - 40 - Min. plate dimensions mm: 250 x 320 - Max. plate dimensions mm: 1200 x 3000 - Total connected load kW: 11

Stanje: dober (rabljeno), Koda: 0158 Znamka: ITALPRESSE Model: LOCK FORM SYSTEM AIR – CE standard Hsdpfx Afspvk Dijqofh Hidravlična membranska stiskalnica na zračni pogon z avtomatskim nalaganjem in razkladanjem – v skladu s CE standardom 3D laminacija furnirja na eni strani plošče, ki so oblikovane ali profilirane na eni in ravne na drugi strani, za proizvodnjo dvignjenih panelov vrat omar, čelnih plošč predalov, pisalnih miz, jedilnih miz, kuhinjskih pultov ipd. 3D površinsko lepljenje plastičnih folij (PVC, PPE, ABS, prenosne folije) na plošče, oblikovane ali profilirane na eni strani, za izdelavo: vrat omar, čelnih plošč predalov, pisalnih miz, jedilnih miz, kuhinjskih pultov, trgovinske opreme, notranjih vrat itd. Dimenzije plošče mm: 2650 x 1250 Višina obdelovanca mm: 55 Manometer za kontrolo tlaka Samodejna ponastavitev tlaka Časovnik odpiranja

Stanje: zelo dobro (rabljeno), Electronic programmer NC 400 Hfodpfelwqrtox Afqsh Feed-through motorized conveyor belts (No.) 2 Horizontal drilling supports (No.) 2 Drilling units per horizontal drilling support (No.) 2 Spindles per horizontal drilling unit (No.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (No.) 6 Drilling units per lower vertical drilling support (No.) 2 Upper vertical workpiece clamps (No.) 4 Continuous screws for chip removal (No.) 2 Digital position display (axis) Total connected load (kW) 27.7 The CNC controller manages the movement (X-axis) of the horizontal drilling supports. The CNC controller manages the movement (Y-axis) of the stops. The CNC manages the movement (Z-axis) of all vertical drilling supports.

Stanje: zelo dobro (rabljeno), PC control type NC 400 No. 2 throughfeed motorized conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty) 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Digital display of positional data (axis) Total connected load (kW): 59.1 Hjdpeidqf Rofx Afqefh The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Stanje: zelo dobro (rabljeno), CNC-controlled (automatic) drilling and dowel-inserting line, consisting of: VZ0250A) LOADING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min. - No. 2 horizontal drilling supports (each with 2 drilling heads, each 1.8 HP and 22 drilling spindles); - No. 4 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 3 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control unit NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL-INSERTING MACHINE "BIESSE" Techno SDT, with CNC - No. 2 continuous motorized belts, feed rate up to 75 m/min - No. 2 horizontal drilling supports (each with 6 horizontal supports – gluing and dowel-inserting tools) - No. 2 lower drilling supports (each with 2 split and reversible drilling heads, each 1.8 HP and various drilling heads); - No. 2 upper vertical workpiece clamps - No. 2 endless screws for chip removal Hfodpfxsd Nviqj Afqeh VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) OUTFEED STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K500-50739, skupna dolžina: 14.000 mm, skupna višina: 2.500 mm, skupna širina: 3.600 mm, vrsta vhodnega toka: trifazni, višina izdelka (maks.): 100 mm, višina izdelka (min.): 30 mm, dolžina izdelka (min.): 500 mm, največja dolžina izdelka: 1.800 mm, največja širina izdelka: 1.500 mm, širina izdelka (min.): 600 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 6 letvica, vhodni tok: 33 A, delovna višina: 900 mm, prehodna višina: 250 mm, širina mize: 1.700 mm, dolžina mize: 2.000 mm, leto zadnje generalne obnove: 2022, teža obdelovanca (maks.): 100 kg, Oprema: dokumentacija / priročnik, Overall machine dimensions: Width: 3,600 mm Length: 10,600 mm (excluding loading and unloading area) Height: 2,500 mm Working height: 900 + 50 mm Feed rate: 13 – 23 m/min (frequency-controlled) PE shrink flat film properties: • Shrink film suitable for shrink sealing process (top and bottom film must be laterally sealable in the tunnel). • Biaxial shrinkage value approx. 50–60% lengthwise, approx. 40–50% crosswise • Treated with antistatic agent. • Shrink film with needle perforation improves the shrink process and allows higher gas and water vapor permeability. Shrink film to be used: • Biaxially shrinking, needle-perforated. • Wound on rolls with firm edges and straight alignment. Film thickness for application: approx. 40–60 µm. Film widths for application: 800 mm, 1100 mm, 2000 mm Maximum roll outside diameter: 350 mm Minimum core outside diameter: 90 mm Hfjdsvvlyiepfx Afqjh Bottom film calculation: Pack width + 200–250 mm Top film calculation: Pack width + (2 x height) + 200–250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L): 1,700 x 2,000 mm / Feed speed: 13 – 23 m/min Roller conveyor after tunnel (W x L): 1,700 x 2,000 mm / Feed speed: 13 – 23 m/min KFE Standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Maximum pack height (clearance height): 250 mm / Max. film roll diameter: 350 mm Film thickness: approx. 40–60 µm PE film, good quality / Weight: approx. 3,100 kg Side sealing unit: Seal bar length: 1,850 mm / Adjustment range: 500 – 1,600 mm / Feed rate, adjustable: 13 – 23 m/min Shrink tunnel ST / II -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Conveyor length: 3,560 mm Feed rate, adjustable: 6 – 23 m/min The machine can be inspected at the production site.