Rational SCC201E konvekcijsko-parna pečica

RATIONAL SCC201E

Stanje: rabljeno, CNC Press Brake AMADA Model HFBO 50 x 2000 Serial No.: HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8-axis CNC control - Operateur II Press capacity: 50 tons Working length: 2,090 mm Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1,660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 V, 50 Hz, 20 A - 8-axis CNC control Operateur II: Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-type tool clamping for the upper tool (5 units AMADA Expert, 5 units UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - Upper tooling set, 11-piece, 30°, total length 1,675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - Lower tooling, 2-piece, 88° - V8, total length 1,250 mm - consisting of: 1x 835 / 1x 415 mm Gjdpfow Iq Ugjx Agyebi - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book available Weight: 4,700 kg Good condition

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: omejena funkcionalnost, Leto izdelave: 2003, obratovalne ure: 24.000 h, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 4.100 mm, Kot upogiba (maks.): 183 °, radij upogibanja (maks.): 300 mm, debelina stene: 8 mm, Transfluid DB 2090 DB CNC Mandrel Biegezentrum für Rohre Exzellente, hochwertige Maschine aus deutscher Herstellung, Haupt-Hydraulikpumpen komplett generalüberholt und der Hauptbiegekopf vollständig revidiert. Es muss lediglich noch ein neuer Encoder installiert werden, dann ist die Maschine einsatzbereit. Ausstattungsmerkmale: – Maximale Rohrkapazität: 100 mm x 1,6 mm bei 1,5D Biegeradius – Steuerbare Dornrückholung (anticipated mandrel withdrawal) – Vollautomatische Positionierung von Spannbacken und Mitnehmer – Druckverstärkter Mitnehmer für enge Radien und Dünnwandrohrbearbeitung – Langer Maschinentisch mit 4000 mm über Dorn – Umfangreiches Werkzeugsortiment im Wert von über AU$150.000 inklusive Werkzeugliste: – 101,6 mm / 152 mm CLR – 101,6 mm / 200 mm CLR – 76,2 mm / 114 mm CLR – 76,2 mm / 200 mm CLR – 76,2 mm / 238 mm CLR – 63,5 mm / 96 mm CLR – 57,2 mm / 86 mm CLR – 50,8 mm / 76 mm CLR – 44,5 mm / 67 mm CLR – 40 x 40 mm / 120 mm CLR Gbedpfxstrd T To Agyji – 50 x 50 mm / 150 mm CLR – 60,3 mm / 150 mm CLR – 48,3 mm / 120 mm CLR

Leto izdelave: 2017, stanje: zelo dobro (rabljeno), Bluhm Weber Legi-Air 4050 labelling machine Further units in stock! Year of manufacture: 2016-19 Print resolution: 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed: Up to 400 mm per second Stamping sizes (mm): Tamp-blow standard from 12.5 x 7 to 160 x 300 mm, Label lengths must be accordingly limited. For certain label materials, longer or smaller labels are possible with special tampers. Label gap: Minimum 3 mm Label roll: 300 mm diameter, up to 450 running metres, 76 mm (3") core, outer winding (optional inner winding) Data interfaces: Gsdofp A I Espfx Agyobi RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W): 770 x 560 x 580 mm, Applies to systems with 250 mm stroke Controller display: Multilingual operator guidance 5.7" VGA touch display Service interval indicator Recall, edit and save label data USB port for storage device or keyboard Compressed air connection: 6 bar – compressed air must be clean, dry, and oil-free.

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), Two complete injection molding production lines with two Husky injection molding machines, five complete molds with metal separators, Motan gravimetric dosing systems, and crane systems are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2,424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s–12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s–15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s–11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s–14s. 6) 48-cavity H-PET-AE mold. Gjdjw Az Rispfx Agyebi Overall system dimensions (LxWxH): approx. 24m/13m/5.5m. Includes drying unit, mold dehumidification, color dosing equipment, and T-belt conveyor. Documentation available. On-site inspection possible.

Stanje: novo, CNC-federnformmaschine. Eine bewährte Maschine, die in keiner Federnwerkstatt eines Federnherstellers fehlen sollte – eines der besten Preis-Leistungs-Verhältnisse auf dem Markt. Gbsdpfx Agotv D Awsyei

Stanje: generalkompletno obnovljen (rabljeno), AUTOMATISCHE KOMPLETTE BOHRSTRASSE, maximale Arbeitsbreite 3200 mm, mit schneller, automatischer Handhabungstechnik. Bestehend aus folgenden Maschinen: A) BESCHICKSTATION „RBO“ Winner C 3200 mit Doppel-Greifer und zentralem motorisiertem Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Zuführen der Plattenstapel zum Beschicker. B) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° C) 1. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten Gbsdpfsdfgg Ijx Agyji D) 2. AUTOMATISCHE BOHRMASCHINE „BIESSE“ Mod. Techno FDT mit 2 horizontalen Bohraggregaten und 7 unteren vertikalen Bohraggregaten E) ROLLENBAHN (Verbindungsrollentisch mit 90°-Förderbändern) „RBO“ Transfer TA 90° G) ABSTAPELSTATION „RBO“ Winner SC 3200 mit Doppel-Greifer, mit Doppelablage, mit zentralem motorisierten Rollentisch. Mit 2 bodenmontierten motorisierten Rollbahnen zum Abfördern der Plattenstapel vom Abstapler.

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Chip conveyor High-pressure system with integrated paper band filter unit and cooling unit Fanuc 310 control Power-on hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available Gbsdpfjwwa U Aex Agyoi

Stanje: rabljeno, Leto izdelave: 2004, maks. premer obdelave 610 mm maks. dolžina obdelave 1.522 mm pomik - x 740 mm pomik - y 410 mm pomik - z 1.838 mm krmiljenje MAZATROL Fusion 640M Pro b-os 240° c-os 360° vrtljaji vretena 4.000 min⁻¹ vrtina vretena 88 mm vrtljaji rezkalnega vretena 12.000 min⁻¹ Gbodpfx Agox Avr Soyei število mest v menjalcu orodij 80 CNC stružno-rezkalni center | MAZAK - INTEGREX E-410H Stroj je dobro vzdrževan. Video posnetke stroja z lokacije v tovarni vam pošljemo na zahtevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B axis. 10-position pallet changer, automatic tool changer with 199 tool pockets. Accessories supplied with the machine: Chip conveyor, high-pressure coolant system through the spindle with separate tank and paper filter. Godpfx Ajku A A Hogyebi

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. Gsdpsfz U S Ejfx Agyobi - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.