Surfinisher / vibracijska brusilna naprava

Rösler RMSF-4/800 / R 12/6 SM-E / Z1000

This system is a complete surfinishing plant including extraction station + undersize media separation station + complete water treatment + water tank from Rösler.

The deburring performance with an immersion time of 20 seconds corresponds to approximately the same performance as 10-15 minutes in a conventional vibratory finishing system.

Rotating process drum RMSF 4/800
1 pc. round drum made of plastic
- Drum diameter: 850 mm
- Drum depth: 500 mm
1 pc. quick coupling for easy drum change
1 pc. drive motor, power 7.5 kW
1 pc. dosing unit D1-K/320 SF (recirculation water) on stand
1 pc. stand for inlets into the process drum
1 pc. flow monitoring (via flow sensor)

Undersize media separation:
1 pc. abrasive media return system
1 pc. base frame as sturdy welded construction
1 pc. balancer for weight compensation (media + hose + nozzle) incl. mounting frame
- Suspension for hose on base frame
1 pc. vacuum generator for creating negative pressure
- Connection of the pipework to the transfer unit of the mass finishing system
- Suction hose with nozzle, approx. 5 m length
1 pc. collection container 500 liters as cyclone separator
- for collecting process media extracted from the process drum
- for transferring process media to the screening machine
- incl. automatically operated shut-off knife valve and hose for recirculation of process media to the screening machine
1 pc. spray nozzles for rinsing the collection container
1 pc. two-handed control for flap
1 pc. dosing unit DZ1-K

Rösler screening machine R 12/6 SM-E
- for undersize separation
- Total length: 1,400 mm
- Total width: 1,160 mm
- Screen surface: 1,200 x 600 mm
- Discharge height: 1,065 mm
- Step in the separation zone: 1 x 40 mm
- Drive power vibration motors 2 x 0.525 kW
- Vibration motors mounted on the side
- Motor speed: 1500 rpm
- Operating voltage: 400 V, 50 Hz, 3 Ph N/PE

Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge
Consisting of:
Centrifuge Z 1000
Gsdoyngitepfx Abrebu
* Centrifugal rotor made from aluminium alloy
* Speed: 2,050 rpm
* Reduced peeling speed via frequency inverter
* Automatically retractable peeling knife
* Sludge volume per peeling cycle: up to 25 kg
* Automatic residual water removal
* Long bearing service life due to relubricable special bearings
* Electronic vibration monitoring
* Automatic rotor rinsing

Equipment:
1 pc. sludge trolley RSKM 30
1 pc. combined dirty water and recirculation tank 700/700 liters
1 pc. flocculant metering pump DP2
1 pc. automatic post-dosing DZ-4/320
2 pcs. suction lances (empty level monitoring)
1 pc. noise insulation package approx. 80 dB(A)
1 pc. cooling unit RK 3
1 pc. titration test kit for manual compound measurement

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.