Prstni rezkarji, 17 kosov

Protostar Ø32 x 40mm

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Fgodpfx Asr A Hcbobreh Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: rabljeno, Gear milling cutter Module 8 Fjdpfxjdklt Nj Abregh 20 degrees Length: 1800 mm Diameter: 120 mm Bore: 40 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Table surface: 650 x 650 mm Ram surface (round): 140 mm Fsdpfx Aefcw Apobrogh Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: rabljeno, Räummaschine Fsdpfst Hr Dfjx Abregh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Fjdpfx Aeh Ek Dasbrsgh - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Welding positioner Focker Strähler 8 tons - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Rotation speed: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted to center): 1,170 mm - Height (horizontal): 1,400 mm Fjdpfx Abef Ezdnsregh - Length: 2,400 mm - Width: 1,500 mm - Condition: visually and technically impeccable, runs very quietly

Stanje: rabljeno, Leto izdelave: 1996, Diameter / mm Workpiece length / mm Length / mm MITUTOYO SURFTEST SV-500 surface roughness tester with OLZE measuring plate Size: 600 x 600 x 80 mm Nominal µm: 16 Actual µm: 10.00 Net weight: 85 kg Fgedpfetvm Smox Abrjh Information regarding the scope of delivery The package includes only the ordered product. Any additional decorative items or other objects shown in the product images are not included in the delivery.

Stanje: rabljeno, Clinch Unit TOX – Pneumatic-Hydro TOX Press Hydro-pneumatic Press TOX Pressotechnik POWER PACKAGE Type: CRS 03.62 No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - Integrated clinching tool - Pneumatic valve for actuation - For punch joining or clinching - For creating a form-fitting connection between 2 sheets without piercing or heating the material - Mounted on stand Fodpfx Abodz Sqqsregh - With basic electrical control and foot switch Weight: 230 kg Removed from a production line, sold without electrical control

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 34, max. Zugkraft: 10 t max. Hub: 1000 mm Schnittgeschwindigkeit: 7.5 m/min Rücklaufgeschwindigkeit: 24 m/min Gewicht: 6,2 t Die Maschine ist für das Räumen von Rohren geeignet. Fgedond Dmepfx Abroh

Stanje: zelo dobro (rabljeno), 10 x deep hole drills, manufacturer Botek 3 pieces: 6.5 x 320 mm 2 pieces: 10.2 x 190 mm 3 pieces: 10.4 x 250 mm 1 piece: 11 x 350 mm Fsdpshl Awdefx Abrsgh 1 piece: 11 x 270 mm Weight: 1.5 kg