Generator

Proton ZPP 20R 20kW 30kVA

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.030 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 250 l, barva: bela, Izhodni tok: 217 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 165 kW (224,34 KM), neprekinjena moč: 150 kW (203,94 KM), skupna dolžina: 3.200 mm, skupna širina: 1.050 mm, skupna višina: 1.750 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Ricardo, Cummins, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 150 (150kW - 165kW) in a compact, weatherproof and additionally soundproofed enclosure. The unit features an external Automatic Transfer Switch (ATS) system for autostart, as well as numerous other functions detailed further below. • Model: Proton ZPP 150R ATS • Maximum power: 165 kW / 200 kVA • Rated power: 150 kW / 188 kVA • Ready for operation: Yes (Pre-filled with fluids, test-run) • Category: Industrial genset • Condition: Brand new • Manufacturer: Proton • Generator type: Three-phase • VAT invoice 23% • Year of manufacture: 2024 • Warranty: 36 months ⊳ ENGINE: Engine model: 6RT80-176DE-TURBO (British Series) Fuel type: Diesel Fuel consumption: - 33.0 litres/hour (at 75% load) - 24.0 litres/hour (at 50% load) Engine configuration: Inline (R4) Displacement: 9700 cc Direct injection Lubrication: Forced, oil pump engine ⊳ ALTERNATOR: Lodpfx Aotp I Ipef Iehp 100% copper windings AVR voltage regulator: Yes Alternator model: Proton 274G Rated power 400V: 150,000 Watts (150kW / 188kVA) Maximum power 400V (up to 15 minutes): 165,000 Watts (165kW / 200kVA) Rated power 230V: 50,000 Watts Maximum power 230V (up to 15 minutes): 55,000 Watts Rated current (400V): 217.0 A Circuit protection: C16, C32, main - 250A Frequency: 50 Hz Alternator construction: Synchronous ⊳ ENCLOSURE: Soundproof canopy Weatherproof enclosure Three-phase and single-phase sockets Fuel tank capacity: 250 litres Average runtime on full tank: 20 hours Transport kit: Forklift pockets, lifting hooks for HDS loading Dimensions: 105 x 320 x 175 cm Gross weight: 2030 kg ⊳ FEATURES: Voltage stabilizer (AVR) - Stamford SX460 (2%) - electronic voltage regulation under varying loads - electronic frequency stabilisation Automatic operation with ATS (Autostart) Overload and thermal protection Oil pressure, oil level, and coolant level sensors Glow plugs Oil sump heater Coolant heater Battery - 2 x 100Ah Automatic battery charger ⊳ CONTROLLER: Controller model: Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Integrated PLC logic and PLC editor Overload protection CAN module extensions Integration with SCADA system Additional outputs for 4G, Ethernet, RS232/485 connections Remote control and GPRS monitoring - Optional Modbus, Ethernet communication - Optional Why us? We are a company specializing exclusively in generator sets, operating in this sector for over 17 years. We are committed to ensuring our products reflect the highest standards of quality and reliability. Over the years, we have provided solutions to more than 10,000 clients throughout Poland, even in the most remote regions. We carefully select component suppliers for our gensets, ensuring they are leaders in their respective fields. We offer a wide range of generator sets from 6 to 300kW, based on various engines, including English Ricardo, American Cummins, and German Deutz, as well as multiple configurations tailored to specific customer requirements.

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 180 l, barva: bela, Izhodni tok: 435 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 110 kW (149,56 KM), neprekinjena moč: 100 kW (135,96 KM), skupna dolžina: 2.750 mm, skupna širina: 1.100 mm, skupna višina: 1.450 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Ricardo, Cummins, vrsta hlajenja: voda, vrsta vhodnega toka: trifazni, Three-phase stationary generator set Proton ZPP 100 (100kW - 110kW) in a compact, weatherproof and additionally soundproofed enclosure. The genset is equipped with an external automatic mains failure panel (AMF/Autostart) and many additional features detailed in the description below. • Model – Proton ZPP 100R AMF • Maximum power output – 110 kW / 140 kVA • Rated power output – 100 kW / 125 kVA • Ready to run – Yes (filled with fluids, test run performed) • Type – Industrial generator • Condition – Brand new • Manufacturer – Proton • Generator type – Three-phase • VAT Invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo R6105AZLDS Fuel type – Diesel Fuel consumption: - 22.0 litres per hour (at 75% maximum load) - 14.5 litres per hour (at 50% maximum load) Engine configuration – Inline (R4) Displacement – 7000 cc Direct injection Lubrication system – Forced, with oil pump ⊳ ALTERNATOR: 100% Copper windings AVR voltage regulator – Yes Alternator model – Proton 274D Rated output 400V – 100,000 Watts (100kW / 125kVA) Maximum output 400V (for up to 15 minutes) – 110,000 Watts (110kW / 140kVA) Rated output 230V – 33,000 Watts Maximum output 230V (for up to 15 minutes) – 36,600 Watts Rated current (400V) – 435.0 A Circuit protections – C16, C32, main – 200A Frequency – 50 Hz Alternator type – Synchronous ⊳ ENCLOSURE: Sound-attenuated enclosure Weatherproof housing Three-phase and single-phase sockets Fuel tank capacity – 180 litres Average run time at full tank – 20 hours Transport set – Forklift pockets and lifting hooks for crane/boom truck (HDS) Dimensions – 110 x 275 x 145 cm Gross weight – 1830 kg ⊳ FEATURES: Voltage stabilizer (AVR) – Stamford SX460 (2%) - Electronic voltage regulation under variable loads - Electronic frequency regulation Automatic AMF operation (Automatic mains failure) Overload and thermal protection Oil pressure, oil level and coolant level sensors Glow plugs Oil sump heater Coolant heater Battery – 2x 120Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Hour meter Ammeter Voltmeter Built-in PLC logic and PLC editor Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and monitoring via GPRS – Optional Modbus and Ethernet communication – Optional Why work with us? We are a company exclusively specialising in generator sets, with over 17 years of experience in the industry. We constantly strive to ensure that our products represent the highest quality and reliability. Over the years, we have provided solutions for more than 10,000 customers throughout Poland, even in the most remote locations. We rigorously select our component suppliers, ensuring that only industry leaders are involved. We offer a wide range of gensets from 6 to 300kW with various engine options, including English Ricardo, American Cummins, or German Deutz, and in configurations tailored to our clients’ specific requirements. Lhjdpfx Aotpnm Usf Iep

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, Premer struženja nad posteljo: 540 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 1.500 mm Premer struženja v izrezu: 580 mm Delovna pot prečnega suportnega vozička max. pribl.: 415 mm Premik zgornjega suportnega vozička max. pribl.: 140 mm Območje vrtljajev: 0 - 1.800 vrt./min. Premer glavnega vretena: 135 mm Premer vretenaste izvrtine: 68 mm Notranji konus premera: 83 mm Širina postelje: 403 mm Opremljen z: Tročeljustno vpenjalno glavo FORKARDT F250 Troseljno digitalno merilno napravo FAGOR Fiksna luneta Zaščita za vpenjalno glavo Ljdpfx Asxwx Nvef Ishp Posoda za ostružke Različna držala za orodje, 6 kosov držal za dleto, 1 kos držala za napenjalno pušo Naprava za hlajenje orodja

Stanje: novo, Leto izdelave: 2025, Industrial Metal Lathe CORMAK TORNADO 460x1500 – features double cast iron bed and robust construction, equipped with a 12-speed gearbox and a powerful 5.5 kW / 400V induction motor, delivering maximum torque and a large 82 mm spindle bore. Key Benefits: - Versatile applications: This lathe is ideal for a wide range of tasks, including internal and external turning, taper turning, metric, imperial, module, and DP threading, polishing, drilling, and broaching. - Stable construction: The 300 mm wide cast iron bed is hardened and precision ground, ensuring high vibration reduction and stable operation even under heavy loads. - Digital precision: Fitted with a digital readout (DRO) on two axes (longitudinal and cross), displaying exact travel values on the screen via optical linear scales. - High-quality spindle: Reinforced spindle bearing system and large 82 mm bore ensure optimal performance. The set includes a 250 mm 3-jaw chuck and a 320 mm 4-jaw chuck, along with a 5.5 kW drive motor. - Efficiency and productivity: Rapid longitudinal and cross feed control via joystick significantly reduces machining time, while hardened and ground spindle gearbox gears ensure long-term durability and reliability. - Extensive threading capability: Capable of cutting right and left threads in metric (41) from 0.1 to 14 mm, imperial (60) from 2 to 112 T.P.I., module (34) from 0.1 to 7 M.P., and DP (50) from 4 to 112 D.P., with parameter changeovers possible without gear wheel replacement, facilitating fast and convenient operation. - Precise thread counting: Equipped with a thread chasing dial, allowing quick carriage return to the initial position after disengaging the lead screw nut. - Ergonomic and user-friendly: Intuitive control panel on the gearbox allows quick adjustments of spindle speed and automatic feed. - Machining large workpieces: Removable bed gap allows for turning parts up to 690 mm in diameter and 240 mm in length (with gap removed), increasing the machine’s versatility. Technical Specifications: Swing over bed: Ø460 mm Swing over cross slide: Ø274 mm Swing in gap (diameter x width): 690 mm x 240 mm Centre height: 230 mm Distance between centers: 1500 mm Bed width: 300 mm Max. tool cross-section: 25 x 25 mm Total cross slide travel: 290 mm Total top slide travel: 120 mm Spindle bore: Ø82 mm Spindle nose: D1-8 Spindle taper: Ø90 (1:20) Number of spindle speeds: 12 Spindle speed range: 25–2000 rpm Lodpfxovzzqbe Af Iohp Leadscrew diameter & pitch: Ø35 mm x 6 mm Inch threads, pitch: 2–112 TPI (60) Metric threads: 0.1–14 mm (41) DP gears: 4–112 D.P. (50) Module gears: 0.1–7 M.P. (34) Longitudinal feed: 0.031–1.7 mm/rev (42) Cross feed: 0.014–0.784 mm (42) Tailstock quill travel: 120 mm Tailstock quill diameter: Ø60 mm Morse taper: MT4 Main spindle motor: 5.5 kW Coolant pump motor: 0.09 kW Machine dimensions (LxWxH): 2720 x 1040 x 1340 mm Net weight: 2445 kg

Stanje: novo, Leto izdelave: 2025, The most valued solution. Ledpfxouii Rgs Af Iohp The Legend_500 features a fully painted, heavy-duty reinforced steel construction. With a 500 mm diameter saw blade, a 5.5 kW motor, and a speed of 2800 RPM, it is the ideal machine for users processing wood up to 125 mm thick and 310 mm wide (optionally up to 375 mm).