Magnetni vrtalnik

PROMOTECH PRO-36

Stanje: novo, Condition: new Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €2,595 Drilling capacity in structural steel: 12 mm Spindle mount: 19 mm Weldon Bsdpfx Aoyrhtnspnedi Motor output: 0.4 kW Length: 361 mm Width: 238 mm Height: 352 mm Weight: 14.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm This special battery-powered magnetic base drilling machine is designed for use in remote locations where no mains power is available. The base contains very strong neodymium magnets and does not require electricity to operate. The PRO-36 PM Battery is equipped with an LED monitoring system that displays signals in green and red to indicate the current status of the drill and provide safety notifications. This machine can be used on convex (minimum diameter – 80 mm) and concave (minimum diameter 1000 mm) materials. With the PRO-36 PM Battery equipped with the CAS LiHD 10.0 Ah battery pack, up to 47 holes (D=20 mm) can be drilled in 10 mm steel plates. Features and benefits: • LED monitoring system flashes green when insufficient adhesion is detected, for example due to a gap or workpieces that are too thin • Dual guide system ensures exceptional precision and maintenance-free operation • Overload protection • Tilt sensor stops the motor in the event of machine failure or magnetic detachment • Control panel is fitted with so-called "vandalism-proof" illuminated motor start/stop buttons Standard delivery set: • Cordless drill with cooling system • Plastic case • 4.0 Ah battery • Handle (3 pieces) • Safety strap • 4 mm Allen key with handle • Operating instructions OPTIONS (PRICES ON REQUEST): Charger Pressurised cooling system Vacuum pad Vacuum pump Pneumatic ejector

Stanje: novo, Condition: New Delivery time: approx. 2 - 4 weeks from order Country of origin: Poland Price: €1,445 Holder: 19 mm Weldon Motor output: 1 kW Length: 307 mm Width: 221 mm Height: 317 mm Weight: 13.5 kg Max. core drilling capacity: 36 mm Bdodpoyrhppjfx Apnei Max. cutting depth: 51 mm Stroke: 70 mm Motor speed: 350 rpm Min. workpiece thickness: 6 mm The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the relationship between motor load, feed rate, and the permissible cutting parameter range for the specific tool type and bore diameter. This results in longer tool life for HSS and TCT cutters and improved machine performance. Countersinking and machining thin workpieces is only possible in manual mode when clamping force is insufficient (blinking green LED). A safety strap protects the machine from falling in the event of a loss of magnetic hold. Features and benefits: • LED monitoring system displays the current status of the drill and provides safety and diagnostic data. • The LED system blinks green if inadequate adhesion is detected, such as with gaps or thin workpieces. • Auto Feed Smart Drive optimizes milling parameters for each tool, depending on type (HSS or TCT) and hole diameter from 12 mm to 36 mm, significantly extending tool life. • The tilt sensor stops the motor if the machine tips. • Dual-rod guide system ensures exceptional rigidity and backlash-free operation. • Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials. • Automatic feed control stops the machine as soon as the cutter passes through the workpiece. • Protection against automatic restart after power failure. • Compact, robust design with ultra-lightweight construction (13.5 kg). Standard scope of delivery: • Drill • Metal case • Safety strap • Coolant tank • Chip guard • 4 mm Allen key • Operating manual

Stanje: novo, Condition: New Delivery time: approx. 2–4 weeks from order Country of origin: Poland Price: €1,695 Drilling capacity in structural steel: 12 mm Tool holder: 19 mm Weldon Motor power: 0.45 kW Length: 316 mm Width: 235 mm Height: 328 mm Weight: 11.5 kg Max. drilling capacity: 12 mm Max. annular cutter capacity: 36 mm Max. cutting depth: 50 mm Stroke: 70 mm Motor speed: 260 rpm Min. workpiece thickness: 6 mm The PRO-36 Battery is a magnetic drilling machine designed for drilling holes up to 36 mm in diameter using annular cutters. The machine can also drill holes of up to 12 mm in diameter when using twist drills. The cordless drilling machine is equipped with an LED monitoring system that displays signals in green and red to indicate the current machine status and provide safety information. The control panel features “vandal-resistant” illuminated start/stop switches (green/red). Features and benefits: • LED monitoring system indicates the current machine status and provides safety information • The LED monitoring system flashes green if insufficient adhesion is detected, e.g. caused by a gap or workpieces that are too thin • The double guide system ensures exceptional precision and maintenance-free operation • Overload protection Bodpoyrhqtefx Apnodi • Magnetic field sensor automatically stops the motor when holding force is insufficient • Magnetic Field Shape Control (MFSC) provides maximum holding strength, even on thin materials • The Energy Saving Base (ESB) consumes only 50% of its power when the motor is not running • Innovative intelligent magnet with reduced weight Standard delivery package: • Cordless drilling machine • Plastic case • 4.0 Ah battery • Handle (3 pcs) • Safety strap • Cooling system • 4 mm Allen key with handle • User manual OPTIONS (PRICES ON REQUEST): • Charger • Pipe attachment • Pressure cooling system • Vacuum pad • Vacuum pump • Pneumatic ejector