Oprema za označevanje

Printmark LR-120

Stanje: zelo dobro (rabljeno), Loos U-HD 2000kg/h 16Bar Ffodpfx Aeu I Rxljflet

Leto izdelave: 2012, Stanje: rabljeno, Pasteurizer with tube heat exchanger, 600 L/h (up to 80°C) with automatic control system Buffer tank for Bag-in-Box (BiB) with level control Bag-in-Box filler with flowmeter Oil-fired heating boiler, 50 kW, installed Ffedpfxe Hnnhe Aflot mounted on braked trailer with tarpaulin cover max. gross weight 1,350 kg

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Feed System Media width: min. 100 mm, max. 216 mm Sheet size: min. 76.2 mm, max. 254 mm (*up to 1200 mm in sequential mode) Media diameter: max. 254 mm Core size: max. 76 mm Media weight: max. 10 kg Laminator Media width: min. 80 mm, max. 195 mm Media size: max. length 200 m or 210 mm outer diameter Inner core diameter: max. 76 mm Media diameter: max. outer: 200 mm, max. inner: 25.4 mm Media weight: max. 8 kg Cutter System: Kiss-cut with cutting plotter Ffjdpfx Aet D E Aieflet Motor: Digital servo motor Cutting force: 20 - 300 gf, adjustable in 31 steps Max. cutting area: Without reg. marks: 203 mm x 300 mm; With reg. marks: 186 mm x 1200 mm Max. cutting speed: 600 mm/sec General Data Max. media diameter for separation unit: 220 mm Core: 25.4 mm Number of slitters: 3 Interface: USB 2.0 (High Speed), Network (Ethernet 10BASE-T / 10BASE-TX) Display: LCD, 128 x 64 pt Power supply: AC 100–120V, AC 200–240V, 50/60Hz (auto-switching) Max. power consumption: 170 VA Operating conditions: 10–35°C / 35–75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy: 16–35°C / 35–70% relative humidity (non-condensing) Dimensions (W x H x D): approx. 1904 mm x 994 mm x 1297 mm Weight: approx. 151 kg

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Ffodpfx Afod H Sc Eeljt Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Ffodpfjhw Ng Isx Aflot Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Leto izdelave: 2024, Stanje: novo, številka stroja/vozila: KU 2400, Stroj za odstranjevanje sredice zelja omogoča izrezovanje sredice iz glave zelja ali, pogosteje, drobljenje stebla (s tem se omogoči 100-odstotna izraba surovine, kar pozitivno vpliva tudi na kakovost kislega zelja). Pogon je kombiniran električni in pnevmatski. Splošne značilnosti: Ffodpfx Afoffwfyoljt - Vsi materiali, ki so v stiku z izdelkom, so iz živilsko varnih materialov - Zmogljivost do 2400 glav na uro - Dve liniji za odstranjevanje sredice - Primeren za obdelavo tudi nepravilno oblikovanih glav zelja - Enostavno čiščenje, možnost pranja z vodo pod nizkim pritiskom - Opcijsko možno opremiti s kolesi z blokado za lažji transport - Lahko deluje samostojno ali v liniji z rezalnikom zelja SS80, zmogljivosti 7500 kg/h - Po naročilu so možne različne električne povezave in standardi

Stanje: rabljeno, Leto izdelave: 2014, Herma avtomatski stroj za etiketiranje Fsdpfx Ajvb Ntkeflsft

Leto izdelave: 2010, Stanje: rabljeno, Mettler Toledo PAS 3012 kontrolna tehtnica s etiketirko. Glava za etiketiranje je električno pomična v vse smeri za natančno pozicioniranje etiket. - Največja masa: 6 kg Ffjdoivnqcepfx Aflet - Najmanjša masa: 0,020 kg - E: 0,001 kg - Zasnovano za 70 paketov na minuto

Stanje: novo, Bester Preis: 4499 EUR (EXW Jonava, Litauen) Abmessungen des Schiebeschlittens: 2200 x 375 mm Max. Schnittlänge: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl Hauptsäge: 4.500 / 6.000 min⁻¹ Fodpfodnxydex Afloft Hauptsägewelle Durchmesser: 30 mm Sägeblatt schwenkbar: 0–45° Sägenhub, Heben und Senken mit elektrischer Steuerung Hauptmotor: 5,5 kW Vorschnittsägeblatt Durchmesser: 120 mm Drehzahl Vorschnittsäge: 7.000–8.000 min⁻¹ Vorschnittsägewelle Durchmesser: 20 mm Vorschnittmotor: 1,1 kW Gewicht: 700 kg * Beim Einsatz eines 400-mm-Sägeblatts muss das kleinere Blatt entfernt werden. * Reduzierte Sägeblätter dürfen nur mit maximal 350 mm Hauptschutz verwendet werden.

Leto izdelave: 2018, Stanje: dober (rabljeno), Pakirna linija, ki obsega: - Dvižni trak z letvami in regulacijo hitrosti premikanja izdelka Ffsdpfsinbhtjx Aflot - Tehtnica - 4 dozirna koša - PLC krmilnik za celoten sistem V dobrem delujočem stanju