Vijačni kompresor deluje

Presto / H&G diverse

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Kombinirani rezervoarji 30-32 m³, primerni za polžaste kompaktorje levo ali desno. Rabljeni, delujoči kombinirani rezervoarji od 4.000 € odvisno od stanja, DDV ni vključen. Možna dostava. Fgsdpegypd Hsfx Abtoc

Stanje: dober (rabljeno), Leto izdelave: 2002,

Leto izdelave: 2023, stanje: novo, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel + aluminum Overall dimensions: 3350 x 2200 x 1300 mm Working area: 3100 x 1520 x 140 mm XY Axis Drive, dual-sided gantry: 4 Nm stepper motors with gear ratios, precision class 8 rack and pinion Z Axis Drive: stepper motor with ball screw Travel speed: up to 25 m/min Z-Axis Control System: THC MyPlasm system Collision system protecting the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700 kg Net weight: 1200 kg INCLUDED IN THE PACKAGE: - Control panel - Water table - Replaceable grate - Control software (available in German, English, and Polish) Fsdpfx Absh Rabnetegc - CE declaration of conformity - Technical Documentation (DTR) - Warranty Optional: Selection of a suitable Hypertherm plasma source tailored to individual company requirements.

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Material throughput: LDPE: 110 kg/h, PA6.0/LDPE/EVOH: 150 kg/h, PP/PA6.0/LDPE/EVOH: 135 kg/h, PA6.0/LDPE: 120 kg/h, EVA/LDPE: 150 kg/h. Rated power: 77 kW, PCU power: 30 kW, extruder power: 18.5 kW, motor power: 10.7 kW, heating zones: 1, heating capacity: 12 kW. Documentation available. On-site inspection is possible. Fgsdowty Hkjpfx Abtec

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno),

Stanje: zelo dobro (rabljeno), Proizvajalec: Strautmann Tip: PP 1207 Plus Format bale (DxŠxV): 1200 x 1100 x 730 mm Teža bale: cca 400 - 500 kg Zunanje dimenzije (DxŠxV): 1850 x 1047 x 3079 mm Transportna višina: 2500 mm Polnilna odprtina: 1190 x 600 mm Fodpjv Aiymofx Abtjgc Stiskalna sila: 59 ton / 580 kN Učinkovitost: 1 - 2 bale/uro Število povezav: 4 Teža stiskalnice: 2300 kg Napajanje: 400 V / 50 Hz Moč: 4 kW Mesto namestitve: pokrito-notranje/zunanje Nivo hrupa: manj kot 80 dB(A) Leto izdelave: 2003-2005 Na voljo so tudi stiskalnice Strautmann PP 1207 letniki 2009-2011 cena 5500 EUR Na voljo so tudi stiskalnice Strautmann PP 1208 letnik 2014-2015 Strautmann AutoLoadBaler letniki 2018 cena 7500 EUR

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Fgodpevf E Avofx Abtjc Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: pripravljen za uporabo (rabljen), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical volume reduction of recyclable residual materials in industrial and craft settings: - Cardboard boxes - Foam - PET bottles - Insulation mats - and other baled materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: - Pressing force: 60 tons - Specific pressure: 6.81 kg/cm² - Power supply: 400V / 7.5kW - Bale dimensions: 800x1100x1200 mm - Number of bindings: 3 - Bale weight: approx. 370-410 kg - Binding: manual - Loading aperture: 990 x 1110 mm - Machine weight: 5,420 kg - Average pressing cycle: 47 sec - Year of manufacture: 2011-2016 Fsdpfx Absra A E Ustogc Dixi 80SLD baler Technical data of the baler: Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Filling opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: Depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: - Length: 4,200 mm (+ cage 1,600 mm) - Width: 1,830 mm - Height: 2,620 mm - Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction ensures long-term operation Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used

Stanje: novo, Leto izdelave: 2025, MASCHINE IST FABRNEU Die Maschine ist geeignet zum Verpressen von Aluminiumdosen sowie Stahldosen bis zu einer Materialstärke von 0,2 mm und einem Volumen von bis zu 3 Litern. Sämtliche elektrischen und elektronischen Komponenten stammen von den Marken Schneider und Siemens. Die Maschine ist vollautomatisch, ausgestattet mit einer SPS-Steuerung und einem Siemens HMI Simatic Touch-Panel mit Not-Aus-Tastern. Die Maschine unterliegt der Garantie von AYMAS Makina San. Ve Tic. A. S. für ein (1) Jahr oder zweitausendfünfhundert (2.500) Betriebsstunden, je nachdem, was zuerst eintritt. Je nach Einsatzgebiet ist ein Öl-Kühl-/Heizsystem enthalten. Der MB 500 Magnetabscheider und der VH (120-250) Schwingförderer sind optional erhältlich und dienen zur Trennung von Aluminium- und Stahldosen sowie zur Entfernung von Schmutz und Staub aus dem Schrott. Technische Daten: Ballengröße: 500 mm x 330 mm x ... Behälterabmessungen (Breite x Länge x Höhe): 500 mm x 1.000 mm x 330 mm Leistung: - Bis zu 1.000 kg/Stunde (Aluminium) Fgedperc Dkqjfx Abtoc - Bis zu 2.000 kg/Stunde (Stahl) Ballengewicht (über mechanische Wägevorrichtung): 10–20 kg Taktzeit: 30 Sekunden Stößelkraft Deckelzylinder: 25 t Stößelkraft Hauptpresszylinder: 100 t Betriebsdruck: 225 bar Maschinenabmessungen (Breite x Länge x Höhe): 1.100 mm x 4.200 mm x 2.600 mm Elektromotor: 18,5 kW Maschinengewicht: 5.000 kg

Stanje: novo, Leto izdelave: 2021, skupna dolžina: 2.770 mm, Traktor Club Car Precedent, električni pogon, letnik 2021 Fedpfx Aexpx Szsbtsgc