Preša za bale s križnim vezanjem

Presona LP 85 VH2

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Roll-off container press, 20 cbm usable volume, for hooklift trucks Aventek RM20 Year of manufacture: 2013 Several units available Refurbished, inspected, serviced Large filling opening Divided lid, opens left/right Pick-up on both sides Bjdewifivspfx Afqsdk Side-hinged discharge door Ramp operation possible Machines are refurbished, inspected, serviced and repainted in the desired standard RAL color. We will gladly provide a quotation including delivery.

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 20.536 h, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, lastna masa: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput rate: 300 m³/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying system: 4-fold vertical, fully automatic Throughput rates (depending on bulk density): — 30 kg/m³: approx. 6.0 t/h — 50 kg/m³: approx. 10.5 t/h — 100 kg/m³: approx. 17.5 t/h Bale weights at approx. 1.2 m bale length: up to 600 kg, depending on material PLC: Siemens S7-300 Display panel: pulsotronic Press dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Bodpfju Thypex Afqsdk Special features: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting “difficult” materials and loose bulk goods of small grain size • Switch cabinet with air conditioning • Machine base raised by 200 mm Note: The machine is currently located in our workshop and is undergoing partial refurbishment. We expect the overhaul to be completed by the end of October, after which the machine will be tested and released for sale.

Stanje: rabljeno, Leto izdelave: 2018, Speed: 5,300 bph – 500 ml PET Kosme Preform Tipper – year 2018 Kosme Preform Elevator – year 2018 Kosme Preform Sorter – year 2018 Bdedpjv Sb N Esfx Afqjk Kosme Blow Moulder – year 2018 ATS Chiller Air Conveyors Mixer – year 2016 Kosme Filler – year 2017 AVE Capper – year 1999 Kosme Labeller – year 2018 Conveyors SMI Shrink Wrapper – year 2001 SMI Tunnel Suitable for 6 / 12 / 24 packs Videojet Date Coder Logopak Carton Labeller – year 2012 Code: NP 668

Stanje: zelo dobro (rabljeno), Kompletna jeklena konstrukcija proizvodne hale. Dimenzije - 31,5 x 30 x 9,85 m s pripadajočimi STREŠNIMI sendvič paneli iz izolacijskih plošč. Bdedpfoxu E Igex Afqsk OPOMBA - hala je BREZ STENSKIH PLOŠČ Hala je bila zgrajena leta 2010. V odličnem stanju! Skupna teža konstrukcije je približno 60 ton. Konstrukcija je zaščitena s temeljnim premazom in lakom. Zunanji stebri so izdelani iz profila IPE 500, srednji steber pa iz IPE 600. Hala ima pripravo za žeravno progo. Za halo sta narejena projekt in statični izračun. Hala je razstavljena, prevoz in nakladanje se lahko organizirata.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm–1600mm/500mm–1500mm, capacity: up to approx. 8 pallets/min, swiveling gripper arms: 90°. Documentation available. An on-site inspection is possible. Bdjdpfxotpct Eo Afqek

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Our company specializes in the production of pallet assembly tables. We offer several types of tables, both with pneumatic controls and manual options. Advantages of our tables: - Robust and simple construction - Capability to assemble various types of pallets in different dimensions - Minimum working area of the table: 800 mm x 600 mm Bedpfx Aswn Irqefqjdk - Maximum working area of the table: 2000 mm x 1200 mm - Balancers (counterbalances) for supporting nailers - Fast and easy adjustment of the table to different pallet sizes - Only one operator required for table operation - Competitive pricing Possibility of shipping the table via courier. Custom production available for non-standard pallet sizes as per customer requirements.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Bedpfxjvwlqqe Afqsdk Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: dober (rabljeno), 10,000 pcs Insert Mesh Gratings for Pallet Racking, galvanized Insert mesh gratings available in various sizes, mesh widths, load bars, and load capacities: Negotiable price: from €15,-- net per m² ex stock Bjdpfedhhukjx Afqsdk Larger quantities on request! Insert Mesh Gratings Mesh Size Load Bar Load Bar Direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used goods, very good condition, see pictures. Goods in stock. Transport possible on request. Inspection possible at any time by appointment. Further information on request. Always over 5,000 lfm of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, details and prices as well as prior sale! See our GTC, all prices excl. VAT ex works) Purchase / Sale We are constantly looking for or offering various items from different sectors Broom-clean business clearances Liquidations Fast - flexible - efficient! We also clear or dispose for insolvency administrators. Just send us a few keywords and we will get back to you promptly. To visit our site, please click on our logo!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, AT-3000 je napreden avtomatski stroj za zabijanje žebljev v palete, zasnovan za maksimalno učinkovitost in enostavno upravljanje. Omogoča prilagodljivo izdelavo različnih vrst palet na enem stroju, zgolj z zamenjavo nastavka (šablone). Bdjdpewq Izwsfx Afqok

Stanje: novo, Leto izdelave: 2025, skupna širina: 10.000 mm, skupna višina: 2.700 mm, delovno območje: 2.500 mm, skupna dolžina: 10.000 mm, priključek za stisnjen zrak: 10 letvica, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, skupna masa: 4 kg, vhodni tok: 18 A, delovna širina: 1.700 mm, delovna višina: 180 mm, dolžina podajanja os X: 2.500 mm, dolžina pomika po osi Y: 1.700 mm, moč: 11 kW (14,96 KM), Oprema za proizvodnju paleta za jednog operatera dizajnirana je za izradu standardnih i nestandardnih paleta dužine do 2500 mm. Daske se ručno postavljaju u šablon za palete. Proizvodnja paleta se jednostavno programira i podešavanja se mogu sačuvati u operativnom sistemu Windows. Bedpfx Afewm Ihcoqodk Automatsko izbacivanje (istovar) paleta olakšava rad operatera, jer nema potrebe za ručnim uklanjanjem paleta. Nakon podešavanja broja paleta za slaganje, ABB robot automatski izvodi izbacivanje izrađenih paleta. Instalacijski kapacitet po jednoj smeni: 300 – 500 paleta.