Balirni stroj 80 t z 8-kratnim križnim vezanjem

Presona LP 80 VHK1

Technical Data – Baler:
Manufacturer: Presona AB
Model: LP 80 VHK 1
Year of manufacture: 2012
Total machine operating hours: 25,895 hours (as of July 2025)
Pump effective operating hours: 14,135 hours (as of July 2025)
Total number of bales pressed: 235,597 pcs (as of July 2025)
Main press force: 78.5 t
Specific pressing force: 95 N/cm²
Pre-press force: 28 t
Press chamber volume: 2.7 m³
Feed hopper dimensions: 1,500 x 1,100 mm
Theoretical throughput: 930 m³/h
Throughput under operating conditions: 410 m³/h
Hnsdpfx Abjzdnxgsxon
Bale dimensions: 750 x 1,100 mm
Drive power: 55 kW
Tying system: 5-fold vertical, 3-fold horizontal, fully automatic
Throughput at bulk density of:
- 30 kg/m³: approx. 9 to 12 t/h, depending on material
- 50 kg/m³: approx. 14 to 17 t/h, depending on material
- 100 kg/m³: approx. 16 to 25 t/h, depending on material
Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material
Bale weights: 450 to 600 kg, depending on material and bale length
Hydraulic oil tank volume: 1,000 L
Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H)
Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm
Machine weight (press): approx. 24 t

Condition of the baler:
The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation.

The following refurbishment works were carried out:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank drained completely and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram dismantled and cleaned
- All four running rollers on the press ram dismantled and replaced
- Wire station with deflection rollers for the lower wire cleaned and made operational
- Side guides removed from press ram, smoothed, mounted, and readjusted
- Main hydraulic cylinder dismantled and stripped for inspection
- Piston rod replaced, cylinder tube honed
- Complete set of seals replaced, pressure test performed
- Hydraulic hose for main hydraulic cylinder replaced
- Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced
- Chain cleaned, greased, and chain tension readjusted
- Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control
- Door contact switches checked and partially replaced
- Emergency stop switch checked
- Complete electrical wiring checked and partially renewed
- Bearings of wire guide rollers under the press replaced
- New safety guards for vertical and horizontal binding fabricated and installed
- Machine checked, general maintenance performed, and baler tested in both manual and automatic operation

Scope of delivery:
Only the baler itself is being offered for sale.

Remarks:
Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.