Sredinski stružnica in stružnica za vreteno

POTISJE PA-45 DC

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991 Njdpfx Aswq Dpqebbskt Model: ITPS III Serijska številka: ITPS 80C 25 P1C226 Maksimalna sila stiskanja: 800 kN Delovni hod: 115 mm Napajanje: 415 V, 50 Hz, 3 faze Nazivni tok: 119 A Vgrajena moč: 18,5 kW Teža stroja: 4940 kg Inventarna številka: 9.14 Krmiljenje: Delem DA-65R Stroj se zažene, vendar krmilje ne reagira na ukaze. Prejšnji uporabnik je originalno krmilje AMADA zamenjal z DELEM.

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm Nkjdpfx Aboq Evn Eobet - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Nsdpfx Abjfr Ih Dsbekt Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.134 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, model krmilnika: HASS, širina mize: 914 mm, dolžina mize: 2.134 mm, obremenitev mize: 1.800 kg, skupna masa: 11.340 kg, hitrost vretena (min.): 40 obr/min, največja hitrost vretena: 7.500 obr/min, dovod hladilne tekočine: 15 letvica, razdalja od središča mize do nosu vretena: 864 mm, moč vretenovega motorja: 22 W, nos vretena: ISO 40, število mest v zalogovniku orodij: 40, dolžina orodja: 406 mm, premer orodja: 63 mm, teža orodja: 5.500 g, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Used vertical machining center with HAAS CNC Nksdpfx Abewrfamsbst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.066 obr/min, širina mize: 1.000 mm, dolžina mize: 6.100 mm, skupna masa: 19.000 kg, 3-axis Newall digital readout, feed drives with variable speed controller SA 50 head, spindle speeds infinitely variable up to a maximum of 1500 rpm Nkodpevz Aydofx Abbot Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Weight: 19 tonnes

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. Nkodpfxsfg E Hpe Abbst - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Nkodpfxsdyah Ss Abbet Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Nksdpfjbambrjx Abbet Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: rabljeno, Leto izdelave: 2007, največja širina rezanja: 1.060 mm, največja višina reza: 1.060 mm, Band saw Kasto HBA 10×12, year of manufacture 2007 Cutting capacities: - Round material: 1,060 mm - Square material: 1,060 x 1,060 mm Nksdpswk D Efefx Abbot - Flat material: 1,060 x 1,260 mm Clamping range: 300 – 1,260 mm Smallest dimension to be cut approx.: Ø 300 mm Shortest cutting length: 10 mm Minimum remnant length for single cut: 20 mm Minimum remnant length in automatic mode: 100 mm Table load capacity: max. 50 t Table travel: 6,100 mm Total drive power: 20 kW Saw motor: 11 kW Cutting speed, stepless at 50 and 60 Hz: 12 – 90 m/min Automatic single feed length: 2,100 mm Clamping force machine vice: 50,000 N Saw band dimensions: 11,430 x 80 x 1.6 mm Cutting feed: steplessly adjustable Material feed: hydraulic Material clamping: hydraulic Saw band guide: carbide, replaceable Saw band tension: hydraulic Saw band cleaning: easily exchangeable brush, motor-driven This offer is exclusively for commercial customers within the meaning of Section 14 of the German Civil Code. No sale to private individuals.

Stanje: skoraj kot novo (rabljeno), premer struženja: 1.500 mm, MAXIMUM WORKING DIAMETER: 1600 mm. MAXIMUM WORKING LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND PROBLEM-FREE. Nedpsr Ui R Nefx Abbekt ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION.